Double banjo brake bolt with bleed nipple

[northwind]

http://www.bsr-aerotek.com/store/images/products/bn993-31.gif

Pretty, eh :mrgreen: I just found this in my bits box, it's a double banjo bolt for use with a standard SV master cylinder, fine pitch, with an integrated bleed nipple for easier bleeding. Ideal if you've got a 2-lines-down front brake setup. These are £16.88 from BSR Aerotek, which is where I got it, this one's never been used and I'll sell for a tenner.

(if it turns out to be the wrong pitch, which it shouldn't, I'll refund in full)

[xXBADGERXx]

Still got this Northy , and will it fit a pointy ?

[northwind]

Ha, oh mate, I have absolutely no idea! I've a feeling it's around here somewhere though but I've not seen it for 2 years I reckon, there's a risk I might have tidied in that time... I'll have a wee dig but I dunno.

[sv-racing-parts]

:) Hi, On the Double, or Single for that matter, Banjo Bleeders, the Gen 1 SV650, 99 - 2002 take the fine pitch at the front and rear brake master cylinders. The calipers are coarse pitch,

BTW: These are great add on parts for doing the final bleeding at the master cylinders,

On the pointy Gen 2, 03 - current, both the brake master cylinders and the calipers are course threads,

Enjoy the ride, and best regards,
Blair

[xXBADGERXx]

So it would me M10 x 1.25mm for a Second Gen then ?

[sv-racing-parts]

Hi, Yes, the Coarse thread 1.25 pitch for the 03 and up SV650,

BTW: I will have the other parts I offered you ready in about a week, if you like I can help you out with these at the same time,

I will PM you the photos later,

Enjoy the ride, and best regards,
Blair

[xXBADGERXx]

Yeah man keep me updated on those bits as these brakes are making my life a misery .