problem with flasher relay.

[fourstrokebeast]

hey everyone,

graet day yesterday i finally had my sv650s k6 de-restricted and fitted my new tail tidy and integrated tail light, but there is one problem...
as i switch on the indicators ive realised they are flashing to fast does anyone know what relay i might need or if there is a simple solution to this????
cheers in advance

[TOLAROS]

Have the same problem...SV650s 1999.Real idicators are stock,front indicators are Valter Moto.I will ask a mechanic and will let know,plese do the same if you find out

[silent11]

buy a larger flasher relay that should slow them down

[yorkie_chris]

You need a different relay to solve this, simple enough to fit.

[jambo]

you can add resistors to the wiring where the after-market indicators are as if they use LEDs rather than filiment bulbs they have less resistance. The flasher relay in there as standard uses a charging / discharging circuit to do the timing, so adding resistance slows the cycle back down again.


Or you've got a bulb blown and not thought to look at the other end of the bike :D

[silent11]

iam in the same position just fitted tail tidy and the indis are flashing to quick

i cant seem to find the relay where about is it??

[silent11]

it ok doesnt matter now found it

but does anyone know where i can get a high voltage one??

thanks

phil

[jambo]

it ok doesnt matter now found it

but does anyone know where i can get a high voltage one??

thanks

phil
The bike's electrics are 12V so that's what the flasher unit provides. I'm not sure you'd need more than 12V....

[padmane]

Voltage has nothing to do with it. Its the current.
Just fit resisters across the indicators or fit a LED flasher relay.:D

[silent11]

yeah sry its cause on me rs when i fitted the indi's i changed the relay for a "bigger" one and it sorted out the problem,

but i cant seem to find a relay for the suzuki only universal ones which arnt the same connector anyway, and i dont fancy paying for a resistor at ?6 each

anybody no where i can get one from

thanks phil

[yorkie_chris]

?6 ?
You're being bummed there.

As for standard connector, it's only 2 or 3 wires to put spade connectors on.