GSXR 600 K1 Forks & Bottom Yoke for SV650 K3+ Conversion

[Ter]

Complete with clipons,

there is a little damage to the top of one of the fork legs - doesn't affect the performance - just the eye!

Will post pics after the weekend.

So,
Front forks wih good seals - no leaks,
Wheel spindle and spacer
bottom yoke with stem
LHS and RHS clip ons.

?100 quick sale.

Can deliver in London or post for ?20.

:cool:

P.s. - got a front wheel too, was going to use on my GSXR unless you ??? can ??? persuade ??? me ??? Otherwise!
:smt042

[svdemon]

I'm very interested in this, what else is required for the conversion? Also what colour is the wheel?

[Ter]

Hey,

I believe on a pointy the conversion is a bolt on,
I haven't done the K series - pointy SV conversion. Only the SRAD - Curvy. I'm sure one or two members or the org have done it to their pointys. :bandit:

Well I have three wheels and two GSXRs. I wanted to keep a spare set of wheel for my race bike (GSXR6K1). But we can talk about that later - Two of the wheels are black and the other white.

I actually have another wheel too, although it is cracked at a spoke and might be a little kinked. If you know anyone up North who can sort wheels it could be good for you? A tenner buys it (only if you grabs the forks too though...)

[Grinch]

Are these Usd then I can't rememer with the K1's.

Though I'm interested for a curvy...

[Ter]

Nah, they are RWU versions.

The 600 got USD on the K4+ models,

;)

[svdemon]

Are the gsxr wheels the same to look at as the sv ones? Also whats the script with the speedo? Is it a bodge job?

[phil24_7]

How much for a front wheel and what condition are they in?

Regards

[Ter]

Are the gsxr wheels the same to look at as the sv ones? Also whats the script with the speedo? Is it a bodge job?

AFAIK, the K series wheels match the K3+ wheels, like the SRAD wheels matching the pre K3 SV's.

As for the Speeso - Think you'll need to run a sensor on the rear wheel or front sprocket cover,

Try a search on here for past threads, I'm sure I've read about someone doing the conversion... ;)

[Ter]

How much for a front wheel and what condition are they in?

Regards

Hi Phil,

TBH, I'm still not sure if I selling to fronts...

- Black, true - to be powder coated white
- Black, with a slight flat spot
- White, true but paint not the best
- White, flight spot, crack and grubby paint

Is your front wheel damaged? or were you looking for a spare?

[phil24_7]

I would be interested in a true straight wheel to paint white for a colour change. This will give me a complete set of spare wheels and panels for when the inevitable happens!

It will be for road use. Finish isn't important but straight and no gouges is!