pointy mods

[sv650nutter149]

so what mods have you done to you pointy sv's???

be it indys or little bolts to exhausts or animal horns lol

[xbox650]

scorpion can
yellow fairing lowers
yellow seat cowl
tail tidy
blue anodised front and rear indys
blue rear sprocket with blue mounting nuts
yellow braided lines
any,all and every visible non stress bolt replaced for blue anodised alloy (fairings , front fender , screen kit , all cockpit nuts and bolts ,side stand bolts , rear master cylinder bolts , EVERYTHING )
blue pre-load adjusters
anodised sv lazer cut chain guard
beowulf rad guard
oil cooler guard
R+G for faired bike
paddock stand bobbins in blue
iridium bubble bubble
oberon blue studed pegs
oberon blue front and rear resevoir caps
oberon blue oil filler cap
K+N air filter
all stress bolts replaced for stainless steel
blue dust caps
blue rim tape
sintered brake pads throughout
heated grips
side lights converted to indys
blue anodised housing with white led number plate light
8x6 number plate
Tank is currently blue but getting resprayed to original yellow in may

And thats just what I can remember off the top of my head .

[xbox650]

p.s. its an oldish photo and some of the mods arent on it .

[sv650nutter149]

holy crap lol now thats alot lol talk about bling lol

[younggunns]

so what mods have you done to you pointy sv's???

be it indys or little bolts to exhausts or animal horns lol
look for yaself there's plenty to go around.....
http://i255.photobucket.com/albums/hh143/younggunn1/15_04_08-1.jpg

[v-twin luke]

im in the proses of streetfighting mine not finished yet its really hard to find bits for a curvy w reg, ill get some photo's when its done after that im buying an tl1000r mmmmmmmmm can you smell the power

[Richie]

Meh... a few..

[yorkie_chris]

im in the proses of streetfighting mine not finished yet its really hard to find bits for a curvy w reg, ill get some photo's when its done after that im buying an tl1000r mmmmmmmmm can you smell the power

You're not looking hard enough then :-P
Thought this thread was about pointies? ;-)

xbox and youngguns, I hate to belittle your chav-bikes ... but has anyone done any real mods? :-D

[sv650nutter149]

yes i have....... renthal black bars..... black pointy mirrors and bar ends, scorpion exhaust slightly modded, orignal down pipes (cleaned and baffles removed with a mallet and screwdriver so now technically a race system) kn filter, sv 1000 snorkel, seat cowl and evotech tail tidy with small plate and small indys, also gone down one tooth on front sprocke.

[Jamie Slick]

noob question: what is a "pointie?" :smt053

[yorkie_chris]

One of those ugly ar$ed SV's, made from 2003 and onwards.

[Jamie Slick]

One of those ugly ar$ed SV's, made from 2003 and onwards.

so I own a pointy? :p
:cool:

[yorkie_chris]

Yup.

[$tevo]

I think you colonials call them Gen 2:)

[Jamie Slick]

I'm a colonial? :o :D

[Jamie Slick]

Yup.

:cool: thanks. Now I can tell everyone that I have a pointie. :p

[yorkie_chris]

Just don't forget that suzuki got it right first time around. :-P

[younggunns]

:cool: thanks. Now I can tell everyone that I have a pointie. :p
and a proud owner of the new sexier pointier sv.

better looking,

better built,

better quality,

better value,

better-better-better.

[younggunns]

and a proud owner of the new sexier pointier sv.

better looking,

better built,

better quality,

better value,

better-better-better.
did i mention that it was better....:laughat:

[$tevo]

I'm a colonial? :o :D

With a lot of overdue taxes to pay:smt045:)

[yorkie_chris]

and a proud owner of the new sexier pointier sv. You have sex with pointy things?

better looking, Nah.

better built, Same bike, same hardware, just as rusty :-P

better quality, Yeah, right.

better value, Similar prices new, more expensive second hand.

better-better-better. Worse-worse-worse.

HTH :-P

[Jamie Slick]

and a proud owner of the new sexier pointier sv.

better looking,

better built,

better quality,

better value,

better-better-better.

cool. :D

[Jamie Slick]

With a lot of overdue taxes to pay:smt045:)

8-[ :smt102

What can I say? we suck!

[younggunns]

8-[ :smt102

What can I say? we suck!
btw how rude of me,

hi there slick,

hope ya find what ya looking for when joined this interweb site...

[Jamie Slick]

btw how rude of me,

hi there slick,

hope ya find what ya looking for when joined this interweb site...

;) thanks! Hi there!

[sv650nutter149]

nice to see this is still on topic!!!!!!! NOT!!!!!!!!!! mod or admin can you move the posts that are off topic to idle banter or something??? cheers

[blueto]

hi jamie

i have a blue pointy k3.

my mods are

HAGON REAR SHOCK
OHLINS SPRINGS
POLISHED SWING ARM
POLISHED PAINTED WHEELS
POLISHED HEEL PLATES
LITTLE INDICATORS
MODIFIED UNDERTRAY
ANODISED BRAKE HOSES
DOUBLE BUBBLE SCREEN
CUSTOM MADE EXHAUST
SINGLE SEAT COWL
CLEAR LED REAR LIGHT
HID BULBS
LED SIDE LIGHTS
CARBON FIBRE YOKE PROTECTOR
ONE OF THOSE TANK PROTECTOR THINGYS


THATS what i can think of.

O and its very well cared for. Very gelaming

[Steve_God]

Back on topic... see my sig :)

[xbox650]

Here are some pictures I took tonight for you to take a look at.http://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0982.jpg[/IMG]http://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0981.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0980.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0979.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0978.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0977.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0976.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0984.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0983.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0982.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0985.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0986.jpghttp://i266.photobucket.com/albums/ii246/xbox650/the%20bush/SV%20pics%200408/100_0987.jpg

[MR UKI (1)]

A few on mine, all on it when i bought it (see sig). Tis a Naked though and I still need to get some cans on it! ;)

[phil24_7]

Have a look at my sig, it covers most of my mods!

[joshuasv]

xbox and youngguns, I hate to belittle your chav-bikes ... but has anyone done any real mods? :-D

Braided lines and new pads from Galfer.
Fork internals kit and rear shock by Matris.
and then the usuall supects, Fuel exhaust, Oberon bar end mirrors, Oberon paddock bobbins, BMC filter, Tail tidy, and made my own throttle body sync tool.

I am thinkin on buying a used motor and dropping in the 750 kit and new cams. Anyone know if there is anything that can be done to help the bottom of the motor for reliability?




:riding:

[younggunns]

xbox and youngguns, I hate to belittle your chav-bikes ... but has anyone done any real mods? :-D
well i don't know what your talking about coz as far as i'm concerned anything that you add or change from stock is a mod whether it's a bar end or a full engine up-grade............
so we have done plenty of MODS........

[yorkie_chris]

Wondered how long a bite would take :-P


I am thinkin on buying a used motor and dropping in the 750 kit and new cams. Anyone know if there is anything that can be done to help the bottom of the motor for reliability?




:riding:

Forged crank and rods, but you better be feeling flush...

[southy1978]

Mods thus far on my sv650 sport

- Carbon can Co high level exhaust
- Evotech tail tidy
- clear taillight with integrated indicators
- Tank risers
- Factory pro midrange velocity stacks (35mm+70mm)
- EBC HH front brake pads
- Goodridge blue braided brake hoses
- Osram nightbraker headlamp bulbs + ultra white sidelights
- Seat cowl pad
- Shorter rear dogbones to raise the suspension 35mm
- 120/70 17 front tyre
- 14/45 gearing with 520 conversion

On the 'to do' list is
- front end gsxr swap or just springs and oil change
- rear shock change
- full m4 system
- jhs racing open air filter + band
- remap at steve jordans

[Lozzo]

My mods.

RaceTech cartridge emulators
.85kg/mm fork springs
15W fork oil
GSXR600K5 rear shock
Toolbox removed to give hugger clearance (and it was fugly)
New battery box fabricated to give battery clearance from shock resevoir
Ermax K3 hugger painted satin black
R+G crash bungs
R+G bar ends
R+G paddock stand bobbins
Fairing lowers
Phillips blue-vision bulbs
Chewy's mirror spacers
Home-made tank raisers
De-snorkelled air box
Seat cowl
Chewy's stainless steel frame and engine bolt kit
Scorpion race can (Akrapovic race can cut down 5" being fitted this weekend)
Metzeler Z6s in stock sizes
Hel brake lines in black
Fabbri d/bubble black screen
R6 throttle tube mod
Polished heel plates (cos my Oxtars ripped the paint off)
Hamicad tail tidy with smaller than legal plate
Pyramid Fenda Extenda
Stainless steel rad and oil cooler guards
Modified brake pedal
Suzuki tank pad
Evotech exhaust hanger
Pillion footrests removed
Dark tinted indicator lenses
Scottoiler with the tidiest install ever

I think that's it.