View Full Version : Changing Gear Lever
Crammy15b
03-05-08, 07:20 PM
Hi all,
I had a bit of an off and bent the gear lever on my 99 SV. I bought a new one but then the job of replacing it didnt look as easy as I first thought.
Does someone have a guide of some instructions they could give me to switch it over.
Thanks in advance.
Crammy
Dangerous Dave
04-05-08, 09:46 AM
Remove the complete rear set from the left side, then remove the bolt behind which holds the foot peg on and your pretty much done!! Give it a good grease when you put it all back together and make sure you tighten the bolts to the correct spec!
Found these in the interweb....
http://www.blackbook.org/2002/10/Images/021025.interesting_bits.jpg
http://www.blackbook.org/2002/10/Images/021025.removed.jpg
http://www.blackbook.org/2002/10/Images/021025.ready_to_reassemble.jpg
sv650k4
04-05-08, 11:50 PM
its a pretty easy job 2 do as DD says remove the hole hanger then just un-do the bolt and your basically done apart from putting it back 2 gather lol.
;)
yorkie_chris
05-05-08, 12:35 AM
Moly grease or other dry lube is good
vBulletin® , Copyright ©2000-2025, Jelsoft Enterprises Ltd.