CBR600 RR1-RR3 Owners

[21QUEST]

I know there are one of two folks on here with the above models but can't remember who they are.

I'll be most grateful if anyone with the above bikes could do me a favour by taking some measurements for me.

Please PM if you can help.


TIA
Ben

[Law]

CBR600 RR1-RR3 Owners


:confused: Do you mean the very first ones, the RR3-RR4 which are 2003-2004?

I know Scoobs has a CBR600RR. Have no idea if it's the first model or the revised 2005-2006 model.

Rigor has a very nice CBR600RR7 but that's prob too new for what you require.

Edit: Just seen the edit you made when I was typing, ignore the above and prob get a mod to change the title

[Iansv II]

I've got an RR4, pretty much everything is identical to the RR3 if I can help

[21QUEST]

:confused: Do you mean the very first ones, the RR3-RR4 which are 2003-2004?

I know Scoobs has a CBR600RR. Have no idea if it's the first model or the revised 2005-2006 model.

Rigor has a very nice CBR600RR7 but that's prob too new for what you require.

Edit: Just seen the edit you made when I was typing, ignore the above and prob get a mod to change the title

Thanks Law :). Ah yes, Scoobs does indeed.....can't believe I couldn't remember.

I did change the Title but it still shows on the first page :confused:


Ian, that would be great Ian :). I'd appreciate if you could take the dimension as shown in pic below please.....keeping the ruler/tape as horizontal as you possibly can. Basically the triangulated measurement taken off centre of fork adjusters and the centre of top yoke nut.

I'd also like the distance between the inside surfaces of the front discs.

Last but not least :), the length of the forks.
It would be superb if you could measure with the front wheel off the ground but failing that, the length of RHS fork leg with steering turned to he left would still be of great help.....measurement I need is, from middle of spindle to top of fork stanchions----excluding any part of the fork cap.


TIA
Cheers
Ben

http://img181.imageshack.us/img181/6373/zx6r0799ke1.png (http://imageshack.us)

[Davido]

I've got one.

Can't see the pic you're on about though?

[21QUEST]

I've got one.

Can't see the pic you're on about though?

Cool Davido :). Good call on the pic..... actually forgot to put it on ](*,) . I'll do an edit in a moment.


Ben

[Davido]

Haven't done the forks yet, but here's the yoke.

[Scoobs]

Only just seen this. RR3 was the first one. There wasn't a 1 or a 2. If you need anything else Ben, drop me a PM.

[Iansv II]

Sorry for the late reply, The yoke measurement was the only one I could get but I see you've already got it now, I don't have a front stand to get the front wheel up for the forks

What area of the disks do you need measured ? I wouldn't want to do it atm as they're warped but i'm getting new ones fitted at the weekend so might be able to get the measurements then

[chris8886]

on a slight de-rail (but seems like an appropriate moment). does anyone know of a UK based 600RR forum? have been searching tinterweb a bit and all i can find are US based ones :(

thanks

[Scoobs]

http://www.cbr-forum.org.uk/

[chris8886]

http://www.cbr-forum.org.uk/

you're very good!! ;) thanks matey