PDA

View Full Version : Curvy bits


richwill68
24-05-08, 10:19 PM
Hi you lot,

Right, the GSXR front is alive and kicking so the original curvy front is up for grabs!

Forks, black painted legs, some minor chips, good seals and stanchions, Hagon progressive springs. £100

Front wheel £60 SOLD

Bottom Yoke £20

Top yoke (this is the UNFAIRED one, ideal for a conversion from clip ons to standard bars) No riser clamps. £35

Front mudguard, with fender extenda (dark yellow) £30

Brake calipers £35

Also have a GSXR 600/750 (I think!) bottom yoke. Slightly narrower than SRAD one. Free to good home for price of postage!

Mounting plates for GSXR 600 4 pot calipers to curvy fork legs £30

Ummm...... can't think what else I have for now but I'll get back to you.

All above plus whatever the postage costs (I will NOT rip you off on postage:)).

I do need a set of SRAD front discs so if you have some to swap for what I have then drop me a PM:cool:

Regards

Rich:drunken:

PS Yes.....I am a little under the influence Hahahahahaha. Hic...G'night!;)

drag
25-05-08, 12:17 AM
Are the brake calipers srad calipers ? and are the mounting plates the set Dirtydog had made up ? you can answer in the morning ok :D

DoodleBug
25-05-08, 09:34 AM
Front wheel for me please, I'll send you a PM. :)

richwill68
25-05-08, 09:55 AM
Are the brake calipers srad calipers ? and are the mounting plates the set Dirtydog had made up ? you can answer in the morning ok :D

Calipers are standard cuvy ones. Mountings were made by an engineer friend.

Regards

Rich;)

richwill68
27-05-08, 09:31 AM
Roll up roll up!

Come along boys and girls, it's all got to go:D

No sensible offer refused;)

Rich

Lucas
27-05-08, 12:58 PM
Forks, black painted legs, some minor chips, good seals and stanchions, Hagon progressive springs. ?100


I'm interested in the forks! :D
Are they with pre-load adjusters and what's the spring rates? thx
please p.m. me a pic if ok with you, cheers :D

Ter
28-05-08, 11:11 AM
Hey Rich,

Glad you got it all working - have you put pics up on the site?
:)

richwill68
28-05-08, 06:13 PM
Hey Rich,

Glad you got it all working - have you put pics up on the site?
:)

Duuuude!

Sure works well.
Will post some photos soon mate!:D

Rich