Log in

View Full Version : Breaking - SV 05 and 99


Hooligan
14-06-08, 11:35 AM
Hi All,

Ive still got quite a few parts for 99 to 2002 SV, i have also got a mint 05 bike which i am also breaking. So if you need anything give me a shout.

All with free postage.

Hooligan

List of parts available are:-
Mint radiator and Fan Not a mark on - £140
Black Front Wheel - Mint - £140
Black Rear wheel - Mint - £120
Front Disks Mint - £100
Rear Disk - Mint - £35
Black Swingarm - Mint - £80
Front Forks - Pitting to top of stantions, still good working order - £120
Clip Ons - £35 each side
Front Calipers - Mint - Not a bit of rust or marks - £75
Rear Caliper - Mint - £45
Front Pads - Mint - £12.50
Back Brake Lever - £35 - MINT
Rear Subframe - £70 - MINT
Gear Lever and Linkage - £35 - SOLD
Headlight - Mint - No snapped brackets - £140 - SOLD
Clock Surround - £30 - SOLD
Standard Undertray - £25
Number Plate Bit - £25
Clocks with 1700 mile - £120
Wire Harness - £70
ECU - £50 - SOLD
Throttle Boddies - £70
Top and Bottom Yoke £70 - SOLD
Switchgears - £30 each side.
Rear LED Light - £35
Front Subframe - £75 - SOLD
Clutch Lifter and Push Rod - £30
FAIRINGS
Front Cowl - Black - Slight mark, not snapped still mint - £100
Rear Fairings - £30 each side.
Front Mudguard - Mint- £55 - SOLD

Also have the engine which has been broke into bits, which has new crank, gearbox, clutch you name it il have it.

All prices quoted above are with FREE postage. These parts are gleaming, unless otherwise stated as above. Barely even been broken in.

Have various other 99 - 02 Sv parts like front fairings, carbs, frame, swingarm, switchgears, harness, other odds and ends.

Gordon B
14-06-08, 11:44 AM
Hi mate,.

You wouldn't happen to have an official front brake lever would you?

To fit a 2000 naked curvy, if so how much?

Cheers

Gordon

LEXINGTONONE
14-06-08, 11:49 AM
how much for tank from pointy, what colour is it ?

phil24_7
14-06-08, 12:27 PM
Interested in the tank and any plastics for the pointy.

PM me what ya got prices.

Cheers

Grinch
14-06-08, 12:29 PM
Would you happen to still have some choke cables?

shelleyamy
14-06-08, 03:24 PM
Lower fairings for a curvy?
Mike

600+
14-06-08, 03:27 PM
do you have the bar risers

tanis34
14-06-08, 03:55 PM
hi have you got the tool box cover and tool kit from the 05 cheers paul

Jdawg
14-06-08, 04:52 PM
Have you got a seat cowl and/or belly pan for the pointy?
Also, what colour is the pointy?

mike_avfc
14-06-08, 06:56 PM
I'm after a yellow seat cowl and black rear hugger - for a K4 pointy

thefallenangel
14-06-08, 11:29 PM
rear brake lever from k5 please pm me.

Tim in Belgium
15-06-08, 08:37 AM
Robchester may be interested in the front fairing subframe. I'll pm him regarding this thread.

touch107fm
15-06-08, 03:00 PM
Hi i am looking for
Front wheel mud guard
Rear brake lever
Gear changer lever
All from pointy k5
PM if you can help

Thanks

Hooligan
15-06-08, 06:17 PM
Hi, answers to the above posts are the following.
Tank was damaged, sorry no choke cables or bar risers or seat cowl or hugger

Have toolbox cover for £6, back brake lever for £35 front subframe for £70, gear change lever for £35, front mudguard (Black not damaged, mint for £55, mint radiator and fan with not a bit of damage for £140, front wheel for £140, mint swingarm for £80 no damage. Headlight Mint £140. All items will be free postage above with price. all items are almost new taken from bike with 2000 miles. Have other odds and ends like harness, engine parts and calipers just email me.

Hope this helps.

David

MiniMac
15-06-08, 07:16 PM
If you still have the headlight on the 25th I'll have it.

nickt22
15-06-08, 08:47 PM
Any chance of a right hand front indicator from the pointy? Deb just dropped her SV.

Cheers,
Nick.

drwracing
15-06-08, 09:28 PM
Engine out the K5 ? price please

SuzukiNess
15-06-08, 09:37 PM
what pipe u have? - looking to replace the "monstrosity" on mine..... :)

ooger
16-06-08, 11:31 AM
Black hugger for pointy?

Tail tidy for pointy?


Ta.

johnnyrod
16-06-08, 11:57 AM
Brake pedal! pm me! For a curvy!

k146
16-06-08, 12:05 PM
Hi im after, a headlight and the clock surround plastic for a pointy.

Do u have these parts?

If so how much please

thanks.

Kyle

phil24_7
16-06-08, 05:01 PM
How badly is the tank damaged?

2mths
16-06-08, 08:24 PM
I didnt' see it listed but is Rear brake caliper unit available from the K5 (or is it considered a part of something else)? If so at what price? TIA

samurai.dan
16-06-08, 09:04 PM
do you have a front mudguard for pointy? if so what color?

harvy
16-06-08, 09:05 PM
After a single bar end weight if you got one?

samurai.dan
16-06-08, 09:14 PM
hi do you have a front mudguard for tha pointy? if so what color?

MiniMac
17-06-08, 08:45 AM
Clock surround from the K5? Cheers

Hooligan
17-06-08, 09:03 AM
Closk surround and headlight provisionally sold, will keep you up to date.

mcireland
17-06-08, 07:11 PM
Hey, do you have the oil cooler from the K5? I presume its the same as for the K3 model. If you have it, how much would you be looking for it?

Cheers!

Hooligan
23-06-08, 12:12 PM
Hi, just to let you know these will be going on ebay soon.

My ebay ID is motorbikebitsndbobs, so if you need anything mention your off the sv forum, will do you price as mentioned.

PS I know the parts seem costly, but these are almost new, no marks, unless mentioned.

David

Kneewhere?!
24-06-08, 10:57 AM
My k6 was pushed over and the left side is damaged. I need gear lever and linkage rod thing, mirror and a pair of indicators. Please pm me if you can help. I can get a cheque sent out to you today.

Cheers

Camel
24-06-08, 09:13 PM
Have you got a front wheel for a 99?

Hooligan
05-08-08, 12:53 PM
Parts still available, may seem costly, but have reduced some, all parts are mint condition taken from nearly new bike.

Jayg0
05-08-08, 06:16 PM
Could you PM me a list of what's available from the 05? I need a clock surround, front and rear subframes (which I guess will have been sold) and OEM levers. Also a screen if it's unmarked. Did the bike have lower fairing? Cos I need a right hand fairing bracket (the one that bolts into the head) and a crash bung!

Cheers :thumright:

BlackMage23
08-08-08, 09:03 AM
Whare are you located? I'm looking for a front wheel and would like to save on postage cost if I can.

Hooligan
08-08-08, 09:05 AM
Please see my thread for prices, i am based in West Cornforth, Just off the A1 motorway near County Durham.

David

ging6996
08-08-08, 07:27 PM
hi im after a rear wheel spindle. must be perfectly straight n good nic. for a curvy

graham

The Guru
16-09-08, 12:05 PM
As per PM's, I'll have the Front wheel (Black) from the K6 ;)

Hooligan
16-09-08, 12:08 PM
Front wheel sold to the guru, still other parts available, may seem costly but are like new unless otherwise stated.

Guarenteed to be working, not like ebay bargains.

metalmonkey
16-09-08, 12:51 PM
Have you still got the clocks one of mates will have them off you if so, as the ones on his bike are broken, let me asap. Thx

Pete1987
23-09-08, 12:16 PM
Hi Do you have the Rider and Pillion Seat for the Pointy?

Cheers

Pete

2mths
23-09-08, 12:21 PM
Tank stand for pointy?

Aidan
23-09-08, 01:50 PM
Are the front pads oem (and for a K3 pointy)? If so and they're still avaliable, I'll have them!

Do you have chain and sprockets (again for a K3 pointy)? If so, are they in good nick and what's your price?

Also the swingarm chain guard (bt of rubber over the end of the swingarm that the chain can rub on).

tony_sv650sy
29-09-08, 05:38 PM
Hi Im looking for some parts for a 99 curvy...

Clutch lever
bar ends
LHS footpeg hanger
Maybe LHS fairing if its not respayable
Front indicator

If you can help could you PM prices please, cheers

thor
01-10-08, 09:00 AM
I'm after mirror assemblies for a pointy S. Specifically the part that attaches the mirror stalk to the fairing.

Cheers

Edit: found the parts elsewhere - cheers

MiniMac
01-10-08, 03:45 PM
Are the front pads oem (and for a K3 pointy)? If so and they're still avaliable, I'll have them!

Do you have chain and sprockets (again for a K3 pointy)? If so, are they in good nick and what's your price?

Also the swingarm chain guard (bt of rubber over the end of the swingarm that the chain can rub on).

Sorry to hijack, but if you can't get them from the OP I might be able help as I am breaking a K3.