PDA

View Full Version : Twin Highlevel Renegade Stubby

carsounds_dan
27-06-08, 10:35 PM
Hi,
Up for sale is my twin high level renegade stubby system for the Curvy sv. I'm getting rid as I'm putting the bike back to standard trim. The exhaust can be supplied with carbon sleeves which were fitted only last week but I have noticed have splits in them (small ones, not big old beastys) or with the brushed aluminium sleeves that come as standard.
The exhausts are 30cm long each side and the noise they make from the curvy is simply amazing. They have been tightly repacked and done less than 100 miles since. I also have forsale a set of carbs which have the renegade airkit fitted to them and the matching airbox and wouldnt mind doing a deal on the two (both really matched to eachother).
Let me know about what your think and any offers as atm I don't really know what theyre worth.
Below are pics. Cheers
http://i38.photobucket.com/albums/e147/DanEli1990/DSCN0073.jpg
http://i38.photobucket.com/albums/e147/DanEli1990/DSCN0078.jpg
http://i38.photobucket.com/albums/e147/DanEli1990/DSCN0077.jpg
speedyjanner
28-06-08, 11:35 AM
im interested but funds are low, so i wouldn't want to make a cheeky offer. How much are you expecting?
carsounds_dan
28-06-08, 01:05 PM
I don't really know to be honest, pm me an offer and i'll let you know.. i wont be rude either :P
speedyjanner
28-06-08, 01:52 PM
do they foul on the tyre if you have a pillion no the back? As it looks close
swiest152
29-06-08, 03:15 PM
sent you a PM
carsounds_dan
29-06-08, 05:57 PM
They don't foul the tyre at all, 90% of my miles were with my gf pillion on the back.. but to be fair she is only 8 stone
yorkie_chris
30-06-08, 09:35 AM
They don't foul the tyre at all, 90% of my miles were with my gf pillion on the back.. but to be fair she is only 8 stone

Ask luckypants, he had renes on his curvy and never had problems AFAIK.
carsounds_dan
26-08-08, 11:53 PM
still forsale if people are interested
Endellion
27-08-08, 06:12 AM
Wheres your number plate?
carsounds_dan
27-08-08, 02:13 PM
its removed for photos sake but sits either between or under the outlets dependant of where you position the exhausts
St0rmer66
27-08-08, 03:04 PM
You got PM.
MiniMac
27-08-08, 05:51 PM
Unrelated I'm afraid, but that looks bloody gorgeous. Even for a curvey ;)
northwind
28-08-08, 12:25 AM
That's the underseat rather than high level isn't it? Cost a bit more new, those, but I think they came with the undertray to suit.
mattSV
28-08-08, 05:47 AM
That's the underseat rather than high level isn't it? Cost a bit more new, those, but I think they came with the undertray to suit.

Correct (as usual!) - the underseats were about a grand iirc, the 'standard' hi levels that I had were about £650.

This was Jorge's prototype with the plate hanger fitted:-


http://farm1.static.flickr.com/11/92615908_6c35f271f9_o.jpg

And this was my old 650 with the standard hi-levels and mahoosive plate:-

http://farm1.static.flickr.com/43/80878762_d6e9da9da7_o.jpg
Dangerous Dave
28-08-08, 11:44 AM
That's the underseat rather than high level isn't it?
Technically it is the highlevel with the pipes turned the other way with shaper bends in the link pipe which Rengade started selling for more money, you do get a 916 numberplate section to bolt onto the dodgy undertray they supply.
carsounds_dan
28-08-08, 11:59 PM
see I didnt get that... I may make something out of stainless for the lucky buyer... if they don't go by the end of next week i'll keep them
Dangerous Dave
29-08-08, 02:30 PM
Looking at your avatar you do not have the (so called) underseat system anyway Dan, you have the high level with the cans the other way around.