Dual Renegade Jetting

[swiest152]

What kind of jetting are you guys with dual renegades running?

[northwind]

Pretty much just treat them like any other slipon and they should do fine...

[Luckypants]

My curvy ran fine on stock jetting with these fitted.

[TheShadow]

My curvy seems ok with stock jetting possibly a little rich but to be honest i have not had it on a dyno so cant say for sure.

[yorkie_chris]

Pretty much just treat them like any other slipon and they should do fine...

Yarp.

Did renegade also do a filter and jetkit for the curvy?

[northwind]

A rubbish one, yep :D

[swiest152]

Yarp.

Did renegade also do a filter and jetkit for the curvy?

Yeah, Jorge has not responded to any of my emails so I cannot get the exact details. Are they still in business?

From what I have read:

desnorkle
152.5 mains
17.5 pilots
2 Shims under needle
2.5 turns airscrew
Drilled Slides

if your running pod filters:

160 mains
3 shims under needle


I got them mounted up today but I still have plenty of time to get it jetted before the bike is ready to ride.
http://i242.photobucket.com/albums/ff44/swiest152/square1/rens2.jpg
http://i242.photobucket.com/albums/ff44/swiest152/square1/rens1.jpg

[yorkie_chris]

If 152.5 mains work alright then those pipes must flow as well as a couple of drinking straws. With mine with micron pipe it went stupid lean at 152. 157 is closer but still not right, it needs 160 really.

Pod filters aren't the best idea, apparently you need to play with the air jets to get those to work.

[swiest152]

Pod filters are really only good for racing.

so you think a 152.5 will be too lean?

[Dangerous Dave]

Stick with standard settings, the Renegade is only a botched up OEM system which offers no power gain (*) just weight. I have looked at, and sorry but removed, a fair few Renegade exhaust and the best running were with factory set carbs and filters.

* unless measured on Renegades dyno.

[yorkie_chris]

Pod filters are really only good for racing. why

so you think a 152.5 will be too lean?

Mixture will depend entirely on the system and filter. It would be daft of me to comment as I've never jetted for the rene pipes on account of the silly price tag ;-)

[squirrel_hunter]

Yarp.

Did renegade also do a filter and jetkit for the curvy?

I believe that they also did Velocity Stacks along with the Jets and Filter...

[swiest152]

Mixture will depend entirely on the system and filter. It would be daft of me to comment as I've never jetted for the rene pipes on account of the silly price tag ;-)


Yeah the new price is very high. I got the whole system for $280(£140) shipped.

I will try the 152.5s first and see how they do. Should I drill the slides?