Curvy Parts Ready to send

[carsounds_dan]

Preloaders and Springs GONE
Front Wheel 80
Rear Wheel 70
Clip ons, 40
Yolks 50
Fork bottoms 40
speedo sensor 25
spacer 5each
calipers 80
hoses 20
discs 120
spindle 5
bar end 5
disc bolts 5
wheel bearings 5
sprocket carrier 20
controls 50
fender extender GONE

Thats a list I have, theyre all asking prices.
The fork springs are KTech and the preload adjusters have all the washers, tubes etc. that sit between them and the springs. The wheels are both silver, the front one has a small kerb mark but other than that theyre both mint, the cush drives are all nearly new in the rear wheel aswell. The clip ons are uncrashed and mint, the yolks the same. All of the fork inners are available just ask. The speedo sensor is known to be working and is intact and ready to fit aswell. All the wheel spacers, front and rear are available, including the ones from inside the sprocket carrier. The calipers are clean, have meat left on the pads and are leak free, I was told by the previous owner that theyd been stripped and rebuilt when I brought the bike less than a year ago. The brake hoses are goodwrich stainless items with the splitter aswell. The front discs are only 2 months old and are genuine suzuki items are unwarped and really are like new. The spindle has a scuffed end but is still usable, maybe ideal for a racer as a spare orr something? I have neumerous bar ends in the garage so just ask. the sprocket carrier has the bolts in it still and is silver matching the wheel. I have all the hand controls, throttle tube etc aswell, all are clean and tidy with working switches. the right hand control (lights side) has a small scuff on the rear of the casing that really could be missed easily. Also have a carbon fibre look fender extender.
All parts are available cleaned and packaged well, all prices are without postage and you are welcome to collect from a RH17 postcode (ardingly). The parts are removed due to buying svrash's front end therefore no need for this one. you can try and bargain but obviously the more you buy the better your chance of bartering.
I'll be splitting another curvy in a few weeks (uncrashed, EVERYTHING available) so if there are any more parts you wish let me know by email or pm and i'll create a list of people.

Many Thanks


Dan
danielelias@hotmail.co.uk

[robertjp]

Hi Dan...

First dibs on Bar End please :) Preferably black - i have had an off and mine is very scuffed.

Also....i am after front and rear brake levers and a standard exhaust system mid section only and RHS mirror ...please PM me or post on here if you can help? Its a 2007 pointy but i THINK all these parts are the same??

Do you take PayPal?

[carsounds_dan]

believe it or not I only have one pair of bar ends left (been advertising elsewhere) and theyre not black lol. i'll have a look in my box of bits though

[woodz61]

What colour are the bar ends?

Out of the two SV's is one Grand candy blue 00>02? and would you have front rhs fairing?

[scottjames]

hey would you consider selling the pre loader seperate to the springs? thanks scott :p

[carsounds_dan]

yes any of the bits you see listed above can be split. also if you want more than one let me know

[robertjp]

believe it or not I only have one pair of bar ends left (been advertising elsewhere) and theyre not black lol. i'll have a look in my box of bits though

what about the exhaust, mirrors and levers Dan, can you help there?

You have a PM...

[carsounds_dan]

well i do have a renegade full system for sale with stubbied cans... but depends on how much your wanting to pay. i've got a clutch perch and lever but havent got the brake mastercylinder/lever left. mirrors i'm unsure of i'll have a look

[BlackMage23]

how much for the pre loaders?

[carsounds_dan]

your third on the list for them, please no more offers for the preload adjusters now

[drag]

120 for the discs is that for all three ? and whats the mileage on them ?

[carsounds_dan]

thats for the front two, im still using the back one on my new wheel. they've done 1500 miles since being fitted used in all weathers. they are pretty much like new, the centres need a little clean from being fondled by my oiley hands but theyre all good other than that. pm me for pics if your interested

[stephen365]

pm'd for the fender extender

[yanto]

what condition are the fork lowers

[carsounds_dan]

fork lowers are ok, one has scratches etc where they've been held in a vice to change fork seals. i'll get pictures up soon of all the parts but have to wait for the misses to get back from egypt with the camera

[stephen365]

any news on the fender extender?
Ta

[Ginger 1]

Hello Mate could do with that front wheel!!! is it still there? and can i pick it up?

[carsounds_dan]

fender extender and front springs gone

[carsounds_dan]

bump

[richspace]

Hi
I want the brake hoses if you still have them. Are they front & back ? I have a 2001 curvy. How to pay ?


Preloaders and Springs GONE
Front Wheel 80
Rear Wheel 70
Clip ons, 40
Yolks 50
Fork bottoms 40
speedo sensor 25
spacer 5each
calipers 80
hoses 20
discs 120
spindle 5
bar end 5
disc bolts 5
wheel bearings 5
sprocket carrier 20
controls 50
fender extender GONE

Thats a list I have, theyre all asking prices.
The fork springs are KTech and the preload adjusters have all the washers, tubes etc. that sit between them and the springs. The wheels are both silver, the front one has a small kerb mark but other than that theyre both mint, the cush drives are all nearly new in the rear wheel aswell. The clip ons are uncrashed and mint, the yolks the same. All of the fork inners are available just ask. The speedo sensor is known to be working and is intact and ready to fit aswell. All the wheel spacers, front and rear are available, including the ones from inside the sprocket carrier. The calipers are clean, have meat left on the pads and are leak free, I was told by the previous owner that theyd been stripped and rebuilt when I brought the bike less than a year ago. The brake hoses are goodwrich stainless items with the splitter aswell. The front discs are only 2 months old and are genuine suzuki items are unwarped and really are like new. The spindle has a scuffed end but is still usable, maybe ideal for a racer as a spare orr something? I have neumerous bar ends in the garage so just ask. the sprocket carrier has the bolts in it still and is silver matching the wheel. I have all the hand controls, throttle tube etc aswell, all are clean and tidy with working switches. the right hand control (lights side) has a small scuff on the rear of the casing that really could be missed easily. Also have a carbon fibre look fender extender.
All parts are available cleaned and packaged well, all prices are without postage and you are welcome to collect from a RH17 postcode (ardingly). The parts are removed due to buying svrash's front end therefore no need for this one. you can try and bargain but obviously the more you buy the better your chance of bartering.
I'll be splitting another curvy in a few weeks (uncrashed, EVERYTHING available) so if there are any more parts you wish let me know by email or pm and i'll create a list of people.

Many Thanks


Dan
danielelias@hotmail.co.uk

[carsounds_dan]

only front hoses i'm afriad not the rears. payment will be via paypal if thats ok? it'll be £23 including postage.. pm me

[richspace]

Hi
I want the brake hoses if you still have them. Are they front & back ? I have a 2001 curvy. How to pay ?
Hi.
Got your e-mail response.
IF The hoses are in good nick I want them. Paypal no prob. Give me a payment link or send me your e-mail address. Mine is iamrichmond@yahoo.com

I also need:
Fenda extenda
Bottom fairing ( Blue would B good)
Good rear shock like WP. Maxton or Ohlins ( yeah I know, rarer than rocking horse poo) Will pay a decent price for any of them.
Handlebar risers. ( even rarer than above)
Cheers
Rich

[richspace]

Hi
sent you a post but no response yet. Want the hoses just need to know how to get the cash to you. Cheers
Rich

[rick0361]

Have you got handlebars and top yoke if so how much. Mine is a 2001 and has had LSL's fitted which I am considering ditching for the proper bars

[carsounds_dan]

It is an S model so I do have the top yolk and clip ons, however someone already had dibs on the clip ons.

[sottondan]

dont spose you have drive chain adjusters i just rounded my bolt off and now im gonna be going round in circles :D

[carsounds_dan]

I don't.... I think i've got some new stainless bolts for them somewhere though... i'll have to check.

[5tu]

Hi do you have any race cans/ systems - if so how much do you want

Cheers

[tranx]

Do you have an undamaged front spindle for a curvy? The nut on the spindle of my minitwin if half worn away and while I can still undo it now I don't want to risk rounding it off doing a quick wheel change.

[carsounds_dan]

no i don't have an undamaged one, i've got a half ground one spare for my race bike though if you want that..

[tranx]

No that's ok, I've already got a spare half ground one! :D

[dazzerj]

Hello Dan,

Did the front wheel go?

[srx600]

Hello Dan,

Did the front wheel go?

I have a spare front if you need one. PM me if you are interested

[sebb]

Hi Dan

Do you still have the speedo sensor?

[Dave20046]

It looks like they aren't but are the hoses two seperate lines?

[ejohnh]

pm sent dan

[tactcom7]

PM'd

[dazzerj]

srx600 pm'd

[Jay12329]

Have you still got the Right switchgear? How much and does it have a black or brown connector at the bike wiring end.
ta
J

[benjyman]

PM inbox is full. Interested in the speedo sensor if still about?

[Nicky S]

pm sent dan :P