(follow on) From K3 breaking

[MiniMac]

This is as it stands at the minute I think: Prices don't include P+P.

Mods, this is to be as open as possible as multiple people are asking for the same thing and I don't want to mess it up. Once this first rush is out the way, I'm going to aim for a list similar to Hooligans here: http://forums.sv650.org/showthread.php?t=112151

weecorey:
Clocks 8k miles - £110
front fairing bracket - subframe? subframe would need 10 minutes straightening with a pole. Or two side brackets near the tank?
rear wheel - comes with PR2 tyre, with about 1k on it. So taking that into account, plus the wheel is in good nick, £140. Looking to avoid having to split the tyre and wheel really.
Radiator - Looks like a banana, don't think you will want that!
Clutch lever assembly - Do you mean the bit that bolts onto the clip ons? Lever has gone though (see below)

Thor
Both mirror assemblies.
£7.50 inc P&P
As discussed mate, these are on the way to you tomorrow. Just to confirm, you only want the bracket bit that bolts to the fairing, not the 'stalky' bit? If you could find a picture and circle it, that would be ace as I don't want to disappoint you.

jimmyg:
Right hand footplate and peg: plate is straight to my eye, lever stalk is slightly bent. Have footrest though. £40 and P&P

biker-daz
rear subframe - Looks to be straight to me. Can confirm when plastics off. Do you want me to have a look?
Front seat - can't see a problem with this. Its in good nick. £55 + P&P.
Haven't checked rear plastics and undertray yet, will do if I get chance this week but I don't finish work till 6 30 and its dark then. Can check at weekend if you can wait?

biker biker
LHS mirror - scratched. leave it? Recommend SV Spares or Robinson's for alternative.

Aidan
Remus can + link pipe. Retails for about £280+

Is scratched, but tbh a few minutes with a polisher and some autosol, should be fine. Sounds utterly utterly fantastic. Probably the thing I will miss most. :(. £150 + £12 P&P

sweepdoggydog
Full standard exhaust system.
I cut my system to fit my remus. So I have the silencer. However once remus is removed, I can then remove the header pipes, which would make a full system I think. Thoughts?

silent11
Remus spring. Would prefer to keep this for the remus can really.
Haven't got the small bolt for baffle, it needs drilling out my baffle as it is :)

I've taken some parts off the bike this evening (in the piddling rain and dark :( ) and have attached photos. Some pieces are muddy, but aside from that are OK.

The guy who was after the pillion grab rail, I have found a few scratches on it, and have attached some photos for you to have a look in the following post.

IF YOU WANT ANYTHING ELSE PLEASE POST IT IN HERE WITH AN OFFER. PLEASE DO NOT PM ME AS IT MAY GET MISSED.

I've never had to do anything like this before, so if prices are too low or too high, don't take the p1ss or be offended, just mention it here, and we can work it out. I'm not after shafting anyone, just recouping some of my money to pay my bus fare!

Thanks.
Tom.

[MiniMac]

Piccies of parts off the bike this evening. Am wet now :(

[MiniMac]

More piccies.

[weecorey]

This is as it stands at the minute I think: Prices don't include P+P.

Mods, this is to be as open as possible as multiple people are asking for the same thing and I don't want to mess it up. Once this first rush is out the way, I'm going to aim for a list similar to Hooligans here: http://forums.sv650.org/showthread.php?t=112151

weecorey:
Clocks 8k miles - £110
front fairing bracket - subframe? subframe would need 10 minutes straightening with a pole. Or two side brackets near the tank?
rear wheel - comes with PR2 tyre, with about 1k on it. So taking that into account, plus the wheel is in good nick, £140. Looking to avoid having to split the tyre and wheel really.
Radiator - Looks like a banana, don't think you will want that!
Clutch lever assembly - Do you mean the bit that bolts onto the clip ons? Lever has gone though (see below)



Thanks.
Tom.

Hi Tom, I was hoping to get the clocks for £75, tyre is no good to me as I want the wheel to put a wet tyre on for my race bike, if you do decide to split the wheel and tyre let me know I'd be looking to pay £80 for wheel and disc. I want the bit that bolts on to the clipons for the clutch lever, how much? I also want the front subframe/fairing bracket that holds the clocks and fairing, how much? Is the radiator leaking? Could you list a picture of it?

Regards, Emmet

[MiniMac]

Hi Emmet,

I will get a picture of the radiator, however I think it has leaked but will check.

I can split the tyre and wheel, but might be a few scratches as a result of my taking it off! Can do it for 90 if you want to meet halfway?

The clocks only have 8k on them, which I understand is irrelevant for your racebike, but someone with roadbike would pay about £100 for them, going by previous sales.

I can do the subframe (slightly bent where mirror screws through) for £40?

Clutch lever assembly for £35?

[weecorey]

Hi Emmet,

I will get a picture of the radiator, however I think it has leaked but will check.

I can split the tyre and wheel, but might be a few scratches as a result of my taking it off! Can do it for 90 if you want to meet halfway?

The clocks only have 8k on them, which I understand is irrelevant for your racebike, but someone with roadbike would pay about £100 for them, going by previous sales.

I can do the subframe (slightly bent where mirror screws through) for £40?

Clutch lever assembly for £35?


I understand about the clocks so I'll keep a look out else where, damaged subframe to expensive, Im watching good one on ebay at the minute for £4.99, clutch lever assembly way to expensive, I was thinking more like £5 for that. leave the wheel with me but if someone else wants it go ahead and sell it. Hope your not offended with my opinion on value of your parts. I know you want to get the most possible for them. Have a look on ebay for price comparisons.

Regards, Emmet

[biker-daz]

biker-daz
rear subframe - Looks to be straight to me. Can confirm when plastics off. Do you want me to have a look?
Front seat - can't see a problem with this. Its in good nick. £55 + P&P.
Haven't checked rear plastics and undertray yet, will do if I get chance this week but I don't finish work till 6 30 and its dark then. Can check at weekend if you can wait?


hi ok yeah if you could check the subframe is straight and also let me know how much you want for it. I no longer need the front seat. but would be intrested in the pannels and undertray. if you could have a look at there condition. I dont mind you looking at the weekend iam not in a rush for the parts. Thanks

[MiniMac]

I understand about the clocks so I'll keep a look out else where, damaged subframe to expensive, Im watching good one on ebay at the minute for £4.99, clutch lever assembly way to expensive, I was thinking more like £5 for that. leave the wheel with me but if someone else wants it go ahead and sell it. Hope your not offended with my opinion on value of your parts. I know you want to get the most possible for them. Have a look on ebay for price comparisons.

Regards, Emmet

No problems, I've had only a cursory look at ebay and a few other topics.

Could do the clutch lever assembly and subframe for £30 if you want?
T

[MiniMac]

biker-daz
rear subframe - Looks to be straight to me. Can confirm when plastics off. Do you want me to have a look?
Front seat - can't see a problem with this. Its in good nick. £55 + P&P.
Haven't checked rear plastics and undertray yet, will do if I get chance this week but I don't finish work till 6 30 and its dark then. Can check at weekend if you can wait?


hi ok yeah if you could check the subframe is straight and also let me know how much you want for it. I no longer need the front seat. but would be intrested in the pannels and undertray. if you could have a look at there condition. I dont mind you looking at the weekend iam not in a rush for the parts. Thanks

OK, no worries, I will look at the weekend at both the rear plastics, undertray and subframe.

[m3zan]

hia mate

do have a break pedal available?

M3zan

[thor]

Thor
Both mirror assemblies.
£7.50 inc P&P
As discussed mate, these are on the way to you tomorrow. Just to confirm, you only want the bracket bit that bolts to the fairing, not the 'stalky' bit? If you could find a picture and circle it, that would be ace as I don't want to disappoint you.



Aye. The bits of metal most to the right of the picture of the mirror assemblies.

Cheers!

[metalmonkey]

Hey do you have the wheels for the bike still? If so I know someone who is after set, how much for pair?

[MiniMac]

As mentioned above, some people are interested in wheels. If they don't post for 3 days, you can have them

£280 for both or £350 for both with tyres ono. Don't really want to split them from wheels.

[MiniMac]

bump

Parts of the bike today include:

Both clipons, decent nick.
ECU
Battery
Clutch lever assembly (gone to sv650k4)
Gear selector fork thing (sv650k4)

I'm having trouble getting the rear plastics off, as under the 2 seats there are 6 bolts, 2 of which are pillion grab rail bolts too. They come off, but I'm rounding off the other 4 screws, which just appear to be Phillips.

Left hand rear plastic is cracked near rear light, but right hand side is fine. If anyone wants these, let me know.

Rear subframe looks fine, but until I get plastics off (could crack the brackets off?) I can't get it off the bike.

[MiniMac]

Also, top yoke and switchgear from both clipons (how do you get the wires out of them!)

[weecorey]

No problems, I've had only a cursory look at ebay and a few other topics.

Could do the clutch lever assembly and subframe for £30 if you want?
T

Got a clutch lever assembly, £25 for the front subframe including postage?

Thanks

[MiniMac]

Hi,

sv650k4 wants the lever assembly I'm afraid. Can do the subframe for £28 as postage was £8 on my previous one. That OK?

[weecorey]

Hi,

sv650k4 wants the lever assembly I'm afraid. Can do the subframe for £28 as postage was £8 on my previous one. That OK?


Whats your paypal address and I will send you £28.


Thanks

[flymo]

Is (was) this a faired pointy? I'm after the throttle grip assembly with throttle cables etc, and the front brake master cylinder and fluid res.

You got these still?

[weecorey]

Is (was) this a faired pointy? I'm after the throttle grip assembly with throttle cables etc, and the front brake master cylinder and fluid res.

You got these still?

If tom hasn't got them, I have the front brake master cylinder, not sure about the fluid res, I'll check tomorrow.

[MiniMac]

Hello,

I will have a check on the condition of these tomorrow and let you guys know :).

Tom

[biker-daz]

how bad is the crack on the lhs tail piece? could it be easily fixed? do you have a price for the subframe and undertray? ive got my eye on one on that site but first need to know what you want for yours.

cheers

[SoulKiss]

More piccies.

Are the pieces in the 1st 2 pics undamaged? (clock surround and fairing bottom panel.

If so, how much for em?

[MiniMac]

Left hand tail piece is fine, its the right which is cracked, my error. Not sure on pricing for the subframe and undertray, make me a reasonable offer.

SoulKiss: The fairing bottom panel is in decent nick. I have a mint (brand new, sells for £80 at Robinsons) clock surround, as well as the one off the bike, which has a few scratches near the clocks.

Say £20 for scratched one, £50 for minter? And £30 for the fairing bottom panel?

[thor]

Got my stuff from MiniMac over the weekend. I now have a LHS mirror again! Thanks a lot!

[biker-daz]

ok how much for the lhs? dont know what price to offer on that site ive been looking at i can get both parts subbie/undertay off 2 diffrent people for just under £75 posted so my price would have to bee around that area.

cheers

[MiniMac]

Biker-daz.

Say £70 posted then? I'm having problems getting the plastics off, without rounding the screws, typical sodding cheese screws. I don't want to crack the brackets though, as they won't be any use to them then.

[MiniMac]

Is (was) this a faired pointy? I'm after the throttle grip assembly with throttle cables etc, and the front brake master cylinder and fluid res.

You got these still?

Flymo,

I have the throttle grip and cables, but they are tatty. I can try and get a picture for you this evening?

Master cylinder / reservoir bracket has snapped, I'll get a piccy for you this evening.

Tom

[MiniMac]

Clutch lever assembly still available btw. My error.

[biker-daz]

ok that sounds alrite. if you can pm me your details i will send you a cheque or if you want i could do a bank transfer for the parts. if you cant get the lhs plastics off i will take that as well as ive just brought a undamaged rhs i will also take the joing piece off you if its no broken.


thanks

[Biker Biker]

This is as it stands at the minute I think: Prices don't include P+P.

biker biker
LHS mirror - scratched. leave it? Recommend SV Spares or Robinson's for alternative.


Hi, The LHS one is all I need, the bracket that is attached to the bike is still ok so I only need the mirror and the salk bit.

Let me know a price inc P&P and where to pay

Thanks Tanya

[weecorey]

No problems, I've had only a cursory look at ebay and a few other topics.

Could do the clutch lever assembly and subframe for £30 if you want?
T


Hi Tom, if you haven't already posted the front subframe, through in the clutch lever assembly and I'll send you the other £2 to make up the £30 as above.

Regards, Emmet

[DarrenSV650S]

Has the rear subframe that I originally asked about gone to someone else ?

[MiniMac]

weecorey, its posted already, sorry.

DarrenSV650s, someone else wants them too, but I am having problems getting them off the bike. I must have missed your post in the topic. Sorry. Biker daz might let you have them hehe.

[MiniMac]

Rear subframe and right hand tail plastic still available. Got clock surrounds and pillion grab handle too.

[weecorey]

weecorey, its posted already, sorry.

DarrenSV650s, someone else wants them too, but I am having problems getting them off the bike. I must have missed your post in the topic. Sorry. Biker daz might let you have them hehe.


what service did you use?, hasn't arrived yet.

[weecorey]

Hello Tom, still no sign of the front subframe. what service did you use to post it?

[MiniMac]

Hello,

It was sent using Royal Mail parcels. If it isn't there by Monday evening please contact me on the mobile number I sent in a previous PM (let me know if you can't find it)

T

[MiniMac]

Tanya, apologies for the delay in posting your mirror, I've been at St Johns Hospice since Thursday lunchtime and have only just got home.

I'll post it first thing tomorrow.

[biker-daz]

if you can mate let e know a price on the rear lhs tail piece and tail joiner and light. thanks

[MiniMac]

Biker daz, make me an offer, as long as it isn't a p1sstake they are yours.

Going to drill the screws out probably if the soaking in WD I gave them didnt work.

[weecorey]

Hi Tom, subframe came today. Thanks

[MiniMac]

:) Good stuff, apologies for the delay

[biker-daz]

i realy dont know a price to be honest let me know what you would want and i will c what i can sort,

thanks

[MiniMac]

Hello,

I've now acquired a drill and some penetrating oil. And a blowtorch! So the feckers are coming off this weekend! Will try and post up some piccies for you tomorrow or that and any other bits I can get off.

</mad max mode>

[alisuzuki]

Hi guys,

I am looking for a front wheel for an sv650, year 2003 or later. Would be interested either with or without tyre.

Cheers
Ali

[MiniMac]

I have managed to get the left hand plastic off, but one of the brackets has snapped. In OK condition aside from that.
£40 + P&P if anyone wants it.

Also have ECU, HEL brake lines (never got round to fitting), OE rear brake line and bolts.

Allsuzuki, I can take the wheel off for you, however I need to get a paddock stand first (payday on the 25th)

[phil24_7]

How much for the Hel lines and what style are they?

[Biker Biker]

Thanks.... Wing mirror is now fitted to my bike :-)

[MiniMac]

How much for the Hel lines and what style are they?

Hi Phil,

They have done about 500 miles on the previous owners bike, and are in good nick.

How do you feel about £30 + P&P?

Tom

[breakz187]

Do you have a spare bar end available? I need to replace my right side one.

[MiniMac]

Ahem, the bar end ended up in my the top of my boot, I found it in the ambulance.

<gets coat>

[Kate SV650]

Hi Minimac,
Could you give some info on the bike that you are breaking? I am looking for a silver front wheel (2003 or later), with the tyre if possible (thanks to Alisuzuki for putting me in touch with this forum). What sort of price are you looking for, etc? Unfortunately, I hit a rock that was flung on to the road after a horse-box clipped a corner too tightly and I need back on the road as quickly and cheaply as possible!
Cheers,
Kate

[phil24_7]

Hi Phil,

They have done about 500 miles on the previous owners bike, and are in good nick.

How do you feel about £30 + P&P?

Tom

Will let you know.

[phil24_7]

Kate, how badly is the wheel damaged?

If it's not too mangled motoliner should be able to fix it for around £55+.

http://www.motoliner.com/alloy_wheel_repair.htm

Regards

[MiniMac]

bumpy, loads of stuff still left.