possible exhaust?

[scottjames]

do you think this could be made to fit a curvey? just wondering

http://shop.ebay.co.uk/items/?_nkw=exhaust+can&_sacat=0&_fromfsb=&_trksid=m270.l1313&_odkw=motorbike+exhaust&_osacat=0

[DarrenSV650S]

That link is a bit vague

[scottjames]

http://cgi.ebay.co.uk/Supertrapp-Stainless-Steel-Universal-Exhaust-Can_W0QQitemZ320315981815QQcmdZViewItem?hash=item3 20315981815&_trksid=p3286.c0.m14&_trkparms=72%3A1299%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

sorry try this one

[Jester666]

Just about any can can be made to fit with the right link pipe/brute force.

I had a carbon Renegade (1 of a pair) fom a Ducati Monster 900 on my curvy.

It'll not be coming off the link pipe though as it was put together with a 2 1/2 lb lump hammer. :shock: :lol:

[sv650k4]

As said above any one will fit as long as all bits are the rite sizes etc...

;)

[Dangerous Dave]

Just about any can can be made to fit with the right link pipe/brute force.
+ 1, either get a link pipe with the same dimensions or get one made up for you.

[jimmy-james]

2" = 50mm which sounds a good size to go on standard pipework without being loose. Just fitted a 51mm to my high level link pipe and it was a loose fit but clamped down fine.

[scottjames]

so what size is the original end of the after market like pipes ? (The bikes end) then its just a matter of getting a link pipe and what ever size the can end is, its just a case of getting a can to match.

sorry if it makes no sense, :)

[SV-net]

Dont really want to split hairs but 2" is nearer to 51mm than 50mm.

Any can will fit if you can make the link. The hanger is pretty much universal so no big deal there.

If you get it do some photos and post em.

[yorkie_chris]

Also 1mm is no problem as pipes can be squeezed a bit.

[Dangerous Dave]

This can should fit on all the budget exhaust link pipes, they are all the same diameter.