Anyone? SV400S Ignitor same as SV650?

[Matchless]

Hallo all, new on this forum and usually hang out on the GSR forum. A friend has a SV400S and the ignitor is missing as wel as the plug has been cut off.
Does any know if an 650 ignitor will work? I have been unable to locate any and also cannot get a wiring diagram for the 400, only the 650.
Any advice will be appreciated.:)

[yorkie_chris]

Different rev limit but AFAIK the same. Posssibly slightly different map. The thing to do is ask zadar

[Matchless]

Different rev limit but AFAIK the same. Posssibly slightly different map. The thing to do is ask zadar

Thanks, that sounds promising! I will see if I can find Zadar somehow, assume he is on the forum?:)
Thanks again.

[zadar]

yea,it is all same except rev limiter.sv400 revs higher.
650 box would work but not having those revs would be downside.400 needs to rev high.

[yorkie_chris]

Yes zadar is his forum name. I am fairly sure they are interchangeable as I've heard of 400 ones being used on 650 to up the rev limit.

Edit: beaten to it right on cue!

[Matchless]

Thanks to both of you. Just popped you a PM before I saw your reply.
Would there be any other solution for an ignitor, aftermarket, generic or whatever?
I am wondering if his old ignitor was not salvaged by a needy 650 owner then!;)

[zadar]

Thanks to both of you. Just popped you a PM before I saw your reply.
Would there be any other solution for an ignitor, aftermarket, generic or whatever?
I am wondering if his old ignitor was not salvaged by a needy 650 owner then!;)
no really,at least not that I know off.
I do have 400 box I can sell it but they are not cheap.I have to get them from Japan.they are about $400(US).
you can use 650 until you find right one.
for connector just buy whole harness on ebay.

[Matchless]

Thanks, I will give him the news. I am not sure how far he wants to go moneywise. If he decides to go for OEM I may come back to you.
Again thanks for the feedback it is much appreciated.:D