Curvy parts

[vzzzbuxt]

all on ebay 99p no reserve. 5% total discount on anything purchased by ORG'ers.

should be;

http://search.ebay.co.uk/_W0QQsassZjacsystems


__________________
SPECIAL BITS
-------------
^GSXR 750SRAD complete yoke kit (USED)
^GSXR 750SRAD left and right clipons (USED)
^= these can be used with a early R1 complete front end or most GSXR USD front ends to bolt straight into a curvy SV headstock and in most cases retaining the stearing lock (threads on this forum explain how)

*98-01 R1 blue spot calipers (the pair in good condition with barely used pads and OEM lines)
*98-01 R1 good condition OEM front brake discs (pair)

CURVY PARTS
-------------
*grey rear wheel (wheel only-no crush rubbers, disc or sprocket carrier, tyre)
*1x rear standard swingarm(was gonna them cut/braced together kinda thing and then swap straight onto bike)
*complete carbs from 2002 bike
*standard exhaust system-above average/good condition (cut for aftermarket pipe to be fitted but including original can and rejoining link pipe) £20
*single coil pack ( obviously u need 2, this is just one odd i have left)
*2002 52 plate frame straight with V5.

*other cables bits etc i.e
r/h blue side fairing some marks/
pair throttle cables/
rear brake mount
rear brake caliper (needs servicing)

clock looms for S and naked/
blue flame link pipe/
r/h clipon ( from sv650s) original
rear light
rider seat
pillion seat




:batman:

[Grinch]

I'm interested in the bearing fitting kit.

[Dappa D]

i know its not listed but any chance you have a LH wing mirror??

[chasey]

You have a pm!

[vzzzbuxt]

GRINCH ~ PM sent.

DAPPA D ~ sorry i havent.

CHASEY ~ PM replied to.

[Dappa D]

ok dude thanks for the response

[JamesMio]

Don't suppose you've got any spare brake/clutch hand levers by any chance?

[vzzzbuxt]

JAMESMIO ~ sorry. i bought a set new off ebay for under £20 inc postage about a month ago.

i think i have a brake lever but the ball is missing off the end.

[JamesMio]

No probs - they're just for spares anyway so no panic. Cheers anyway.

[vzzzbuxt]

added a few more bits i just found a few mins ago.

nothing is sold yet./....

[GMS]

I`ll take the best one of the two swingarms :) I want to get mine done black and it`s less time off road if I get a spare painted and swap it in to the bike.
I can collect from Harrogate no prob. just PM me where and when.
Graham

[Neeja]

Not mentioned specifically, but have you got the speedo rotor at all? Don't need the wiring, just the plastic rotor bit :)

[vzzzbuxt]

GMS ~swingarms same condition, just one is cleaner (ive put that aside) if you can PM me contact details and can arrange to meet up when in in harrogate later this month ( cant remember if its the weekend of the 24th or the 31st but will find out)

NEEJA ~ sorry last one i had went ages ago, they are somewhat in demand them speedo rotor's.

on a side note has anyone actually found out the cost new for the speedo rotors? i always found http://www.sparesdirect.co.uk/home.htm bloody helpful.

[chris8886]

what's the condition of your riders seat like please?

[davepreston]

me again do you have 1 bolt/alan key head that connects gear hanger to frame and one of those clips that hold the infill panels below the seat
cheers

[GMS]

Vzzzbuxt you have PM :)

[Dappa D]

PM'd

[vzzzbuxt]

Chris8886 - I'll check Friday as away ATM. Sure it's very good with no rips but will check

Davepreston -bolts for hangers=no bolts for infill and fairings yes- pm me and can send u some!

Gms- pm received and call/text u once know the date I'm up- any other bits u need letme know before and can bring up too.

Dappa d - pm replied

Cheers
J

[vzzzbuxt]

Chris8886 - I'll check Friday as away ATM. Sure it's very good with no rips but will check

Davepreston -bolts for hangers=no bolts for infill and fairings yes- pm me and can send u some!

Gms- pm received and call/text u once know the date I'm up- any other bits u need letme know before and can bring up too.

Dappa d - pm replied

Cheers
J

[paiste]

PM'd
:)

[PJ66]

Hi,just joined this forum have you any more info on the engine your selling,mileage damage etc?Live in Harrogate so collection/delivery not a problem.

[Duke]

Do you have a rear brake pedal / lever?

I broke mine on Monday morning on black Ice!

Ouch!

Thanks

Duke

[vzzzbuxt]

PJ66 -engine belonged to forum member on here jase22.he noticed a issue on rear cyclider and just did an engine swap to investigate the actual issue later. if memory serves me the engine was at about 20K-ish miles and was dynoed shortly before this at 70bhp and ran bloody well with just an a race can fitted!!.

jase22 told me its likely a rear cylinder inlet valve spring was causing it not to run quite however the engine and did still run 6months ago when removed from bike, ive sourced a pair of good heads and was going to swap them over if keeping it. it still has starter motor etc attached.

other than that little bit of corrosion on engine finish (paint) but hell its an unfaired SV!!

the engine and heads are priced at less than they owe me and very cheap compared to anywhere else.



duke - brake mastercylinder yes ill look tomorrow for a lever, though i dont think i do have one.

[PJ66]

Will have the engine,how do i contact you and arrange payment etc??

[vzzzbuxt]

Will have the engine,how do i contact you and arrange payment etc??

I have sent u a PM on here with my contact details so u can call me to arrange collection from harrogate later this month

Cheers
J

[vzzzbuxt]

FYI engine now gone.

anyone else before i just bung it all on fleabay??? - make me a reasonable offer on anything left....

:)

[benp1]

did the riders seat go?

[BigG]

Hi there, is the gear lever hanger available?

[vzzzbuxt]

benp1. riders seat here still. it has no rips, just needs a wipe over after storage.

bigG - sorry no hangers/levers left

[vzzzbuxt]

HER is about to list EVERYTHING left for .99p no reserve on that FLEABAY website!!

ill put the link up once shes done, and see if i can do a SV650.ORG discount plan if any of you buy any of it.

;)

[vzzzbuxt]

all on ebay 99p no reserve. 5% total discount on anything purchased by ORG'ers.

should be;

http://search.ebay.co.uk/_W0QQsassZjacsystems

[vzzzbuxt]

who was it i promised the aftermarket undertray to, to collect next weekend in harrogate???