Put my new bits on today

[mister c]

Well, I've put my new forks on today & my brand new Micron can that I won for £67 on fleabay.
Must be the 1st time I've been 100% legal for years :mrgreen::mrgreen: (Anyone know how the baffle comes out? I tried drilling the rivit out, but it's still solid :()
http://i5.photobucket.com/albums/y177/croozenooze/New%20SV/LGIM0073.jpg?t=1231683651

http://i5.photobucket.com/albums/y177/croozenooze/New%20SV/LGIM0070.jpg?t=1231683889

[Tim in Belgium]

I've heard sometimes you need to shove a broom handle up there to get it out, but that's only rumour and hear say.

[Lozzo]

I've heard sometimes you need to shove a broom handle up there to get it out, but that's only rumour and hear say.

My ex-wife was a midwife, she said the same thing about some of the ones she delivered

[Rich]

My micron had an allen key up inside the end of the exhaust. Have a poke around see if you can find it!!

[mister c]

My micron had an allen key up inside the end of the exhaust. Have a poke around see if you can find it!!
Tried that as well, but it still wants to stay there. Maybe I should leave it well alone :)

[kwak zzr]

my microns were welded in.

[mister c]

That will do then, I'll leave it as it is. Haven't had time to ride it yet, but will see what it's like tomorrow.

[Loopy2103]

Looks very nice. Liking the clear rear light as well

[BanannaMan]

Looks great!!! :cool:

Is the Micron a slip-on???
If so... Will the carbs have to be re-jetted???

[mister c]

Carbs should be fine, I've been running a race can on it since I bought it, so if anything, it should run smoother.
I cleaned & polished it last night & now it's going to get very dirty riding to work :(

[Quiff Wichard]

i have scorpion with baffle on this and had to drill the rivet- then like tim says put a broom handle up the link pipe end and knock it out.

[Dangerous Dave]

Micron didn't make a slip-on for the Curvy SV, only a full system, or is that a bodge job you have done?

I've heard sometimes you need to shove a broom handle up there to get it out, but that's only rumour and hear say.
i have scorpion with baffle on this and had to drill the rivet- then like tim says put a broom handle up the link pipe end and knock it out.
Thats the way to do it, remove the can only and then push a broom handle through the inlet side and knock the baffle out.

my microns were welded in.
Yes most of the Microns are welded, although I think it was the Delta+ which had the removable baffle.

[mister c]

Micron didn't make a slip-on for the Curvy SV, only a full system, or is that a bodge job you have done?

BODGE JOB??????????????????????????????????????????
I resemble that remark :D:mrgreen:

Yes it was, a very big bodge, but it works. The brand new can was £60 + delivery, so I couldn't say no really.

[stewie]

BODGE JOB??????????????????????????????????????????
I resemble that remark :D:mrgreen:

Yes it was, a very big bodge, but it works. The brand new can was £60 + delivery, so I couldn't say no really.
So are you going to bring it up the the pondy on sun and show it off Col ? :D

[mister c]

I will watch the weather Stew, but I could just make an appearance.