Clean and Chav

[DarrenSV650S]

That's my winter mods almost done. LSL touring clipons, R6 throttle, braided lines, banjo bolt brake switch so that I can have the brake lever at a better angle, and some chav fairing mesh and orange bits. Just waiting on some bar ends
http://i88.photobucket.com/albums/k164/DarrenStewartTait/DSCF0001-5.jpg

http://i88.photobucket.com/albums/k164/DarrenStewartTait/DSCF0003-8.jpg

http://i88.photobucket.com/albums/k164/DarrenStewartTait/DSCF0005-4.jpg

[hovis]

oh dear


the screen and rim tape have to go

[kwak zzr]

mmmm my k3 sonic silver pointy fetish feeling comes again.

[Dangerous Dave]

You want the smaller 13mm or 14mm bar end weight for LSL bars, plenty to be had on Ebay.

http://forums.sv650.org/picture.php?albumid=165&pictureid=1456

[DarrenSV650S]

I'm getting the LSL slim bar ends. By the looks of it they will be the same diameter as the bar. So I won't have to chop off the end of the bar to make it flush with the end of the grip. If that makes sense

[Dangerous Dave]

I'm getting the LSL slim bar ends. By the looks of it they will be the same diameter as the bar. So I won't have to chop off the end of the bar to make it flush with the end of the grip. If that makes sense
Mine aren't LSL, have no idea where I got them from, but the slim is the same diameter as the bar. I moved the grips to the end of the bar to tidy it all up a bit, bit more leverage too....

http://forums.sv650.org/picture.php?albumid=165&pictureid=1384

[DarrenSV650S]

Mine aren't LSL, have no idea where I got them from, but the slim is the same diameter as the bar. I moved the grips to the end of the bar to tidy it all up a bit, bit more leverage too....

http://forums.sv650.org/picture.php?albumid=165&pictureid=1384
Thought about that but my cables are stretched as it is. The throttle gets stuck open at full lock. Might have to get longer cables

[Dangerous Dave]

The throttle gets stuck open at full lock. Might have to get longer cables
Ahh... yes, sorry mine are now LSL Match. When I had the LSL Tours fitted I had to have the controls a little more to the inside of the bar.

[hovis]

Thought about that but my cables are stretched as it is. The throttle gets stuck open at full lock. Might have to get longer cables

might?

i would


(and not orange ones)

[DarrenSV650S]

Would a suzuki dealer fit custom length throttle cables?

[Lozzo]

Very clean bike with worthwhile suspension mods, but in my opinion the orange bits look tacky and gash.

[Alpinestarhero]

+1 on the screen and rimtape.

kudos on the higher bars.

get a topbox

[DarrenSV650S]

Got one ;)
http://i88.photobucket.com/albums/k164/DarrenStewartTait/Mull%2008/DSCF0001.jpg

[Dappa D]

i must say it looks bloody lovely in the first pic.....and im not a huge fan of pointies, good work....have to agree about the screen tho, could take or leave the rim tape.

nice bike :-)

[Magnum]

It looks seriously nice, apart from the screen. It looks like Ali G's sunglasses.
http://www.bangitout.com/uploads/61aliG.jpg


That mesh is a good idea, so are the braided lines and the stubby can looks great.

[rowdy]

I like the mudguard, it suits the pointy styling better than some gixxer ones. What year is it? (wild guess k7 600)

[plowsie]

I like it, its unique.

[DarrenSV650S]

Thanks for the comments:D

I like the mudguard, it suits the pointy styling better than some gixxer ones. What year is it? (wild guess k7 600)
It's from a k4 600 with a fenda extenda

So nobody likes the screen? I love it. Especially when the sun shines through it. Looks cool

[plowsie]

So nobody likes the screen? I love it. Especially when the sun shines through it. Looks cool
I do :)

[DarrenSV650S]

I do :)
Woo!:cheers:

[ScottishRawker]

i like the screen,

like the back end of it aswell.

fancy doing my suspension?

Adam

[ScottishRawker]

ohh and where do u get the chavvy mesh? easy to fit?

Adam

[plowsie]

ohh and where do u get the chavvy mesh? easy to fit?

Adam
B&Q - Superglue lol.

[kwak zzr]

B&Q -gluegun lol.


:smt040

[ScottishRawker]

oooh thats not too technical!

[DarrenSV650S]

i like the screen,

like the back end of it aswell.

fancy doing my suspension?

Adam
Do you know how long it took me to do mine?!

ohh and where do u get the chavvy mesh? easy to fit?

Adam
As above, B&Q and a glue gun. Easy to fit. Helps if you have tin-snips to cut it

[ScottishRawker]

what about if i wanted to paint it, just spray paint??

fine i'll just keep the normal stuff and just replace the insides!

[sv-robo]

oh dear


the screen and rim tape have to go

Otherwise looking really good.

[pookie]

Nice unique looking bike ...orange adds a bit of colour..how do ppl see your indicators front on? Had some on mine but took them off as i was worried about now being seen...

Must get off to B&Q for some mesh

[DarrenSV650S]

My front indicators are where the sidelights were

[pookie]

ah gotcha..makes sense now..nice idea

[MR UKI (1)]

Looking good that. I like the orange.

[rob13]

Darren, I love that seat ;)

What thickness is that Rim-Tape by the way? Is it an Ebay job?

[DarrenSV650S]

Darren, I love that seat ;)

What thickness is that Rim-Tape by the way? Is it an Ebay job?
Bet you wish you had one;)
It's 10mm stuff from ebay

[rob13]

10mm, looks just about right that....

[Mgaffz]

Darren, I love that seat ;)

What thickness is that Rim-Tape by the way? Is it an Ebay job?

I have that seat on my k3 is it an aftermarket jobby? ( it was obviously already on when i bought it ) also is the standard one lower? i can hardly touch the floor with my little pegs!!

I like the orange, i like the wheels, i like the stubby, i like the indicator mod, the screen is a bit in your face tho lol :p i still like it tho

apparently i am chav, proper radgy like mista

cheers mick

[DarrenSV650S]

I have that seat on my k3 is it an aftermarket jobby? ( it was obviously already on when i bought it ) also is the standard one lower? i can hardly touch the floor with my little pegs!!
It's a gel seat. Don't think it's any lower or higher than standard. Just cumfier

I like the orange, i like the wheels, i like the stubby, i like the indicator mod, the screen is a bit in your face tho lol :p i still like it tho

apparently i am chav, proper radgy like mista

cheers mick
Cheers :lol:

[etuna]

proper radgy like mista



That line made me homesick!:-D

[Dangerous Dave]

I have that seat on my k3 is it an aftermarket jobby?
It's a gel seat. Don't think it's any lower or higher than standard. Just cumfier
It is the official Suzuki accessory gel seat, it is not any lower or higher than the original SV seat. You can get lower seats, but not lower gel seats.

[Foxy]

Looking good :cool:. Not sure about the orange though but hey it is what you like that counts :D

[shonadoll]

I really like it, it's different.