rictus01
13-02-09, 01:54 PM
As some may know the 404 has a truely pants headlight, I fitted a Yamaha one which was about twice as good and in general I'm happy with it, got hold of a small twin projector setup and was going to mod that to fit in the current housing.
Original unit and Yanaha replacement
http://photos-d.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1503627_2251.jpg
the projector unit I was going to use
http://photos-c.ak.fbcdn.net/photos-ak-snc1/v1977/67/122/621884134/n621884134_1419754_9710.jpg
Change of plan, not using the projectors anymore, I'm happy with the other headlight I fitted, and Mrs Rictus treated me to some nice shiney spotlamps (Birthday coming up and all that) so I made up a light bar instead, not quiet finished yet as I don't have a relay for the main lights, but Angel eyes wired in to the sidelight circuit and the neutral to the mains, (also the switched live when I done the LH switchgear change) so a simple job when I get hold of a suitable relay.
this is the basic spotlamps H3 55w 4" (I got four, you know just in case... ;D ).
http://photos-a.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534240_7651.jpg
And here two are fitted to a length of ex-dinningroom chair leg.
http://photos-b.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534241_7963.jpg
http://photos-d.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534243_8900.jpg
Angel eyes and spots wired seperately, but combined into a single loom, I utilised and old Triumph plug and socket so they would be easily detatchable.
http://photos-c.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534242_8568.jpg
http://photos-c.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534242_8568.jpg
First fit to see how they'd look, not fixed in place yet.
http://photos-e.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534236_6145.jpg
http://photos-g.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534238_7027.jpg
http://photos-h.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534239_7341.jpg
Not happy with the angle as the spot mounts don't depress anymore, so fabricated some brackets to extend forwards and bend down.
http://photos-g.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534246_411.jpg
http://photos-h.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534247_753.jpg
http://photos-a.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534248_1096.jpg
http://photos-e.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534252_2700.jpg
Fairly happy with the results so far, will update when finished.
Cheers Mark.
Original unit and Yanaha replacement
http://photos-d.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1503627_2251.jpg
the projector unit I was going to use
http://photos-c.ak.fbcdn.net/photos-ak-snc1/v1977/67/122/621884134/n621884134_1419754_9710.jpg
Change of plan, not using the projectors anymore, I'm happy with the other headlight I fitted, and Mrs Rictus treated me to some nice shiney spotlamps (Birthday coming up and all that) so I made up a light bar instead, not quiet finished yet as I don't have a relay for the main lights, but Angel eyes wired in to the sidelight circuit and the neutral to the mains, (also the switched live when I done the LH switchgear change) so a simple job when I get hold of a suitable relay.
this is the basic spotlamps H3 55w 4" (I got four, you know just in case... ;D ).
http://photos-a.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534240_7651.jpg
And here two are fitted to a length of ex-dinningroom chair leg.
http://photos-b.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534241_7963.jpg
http://photos-d.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534243_8900.jpg
Angel eyes and spots wired seperately, but combined into a single loom, I utilised and old Triumph plug and socket so they would be easily detatchable.
http://photos-c.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534242_8568.jpg
http://photos-c.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534242_8568.jpg
First fit to see how they'd look, not fixed in place yet.
http://photos-e.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534236_6145.jpg
http://photos-g.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534238_7027.jpg
http://photos-h.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534239_7341.jpg
Not happy with the angle as the spot mounts don't depress anymore, so fabricated some brackets to extend forwards and bend down.
http://photos-g.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534246_411.jpg
http://photos-h.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534247_753.jpg
http://photos-a.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534248_1096.jpg
http://photos-e.ll.facebook.com/photos-ll-snc1/v2089/67/122/621884134/n621884134_1534252_2700.jpg
Fairly happy with the results so far, will update when finished.
Cheers Mark.