PDA

View Full Version : Brake bleeding - for the millionth time.


sv_rory
19-02-09, 01:12 PM
ive got an mot in two hours time.

ive rebuilt the brake calipers and now its time to fill the system up with new brake fluid but for some reason the fluid isnt pulling through?

ive bought one of the one man easy bleed but when i pump the lever and then undo the nipple nothing comes out not even air noise.

i am retightening the nipple before releasing the lever. is there somehting im doing wrong?

rictus01
19-02-09, 01:20 PM
Clearly there must be, have you done brakes before ?

obvious first, you have removed the black rubber seal from the res ?
and filled beneath it with fluid ?

the brake hose is firmly attached to the master cylinder at the top ?

losen the caliper banjo bolt and with a rag below it try pumping some fluid threw, it comes out the banjo, yes ?

try the other side as well?

do them both up, and remove the bleed nipple. try again, fluid still coming out ?

this should get fluid threw most of the system and ready to bleed the air of.

refit the nipples and bleed as normal.

HTH.

Cheers Mark.

arcdef
19-02-09, 02:25 PM
obvious first, you have removed the black rubber seal from the res ?
and filled beneath it with fluid ?



I made this mistake first time i bled the brakes so its easily done!

All good advice and same sort of stuff i had to do to get it going.

rockster
19-02-09, 02:34 PM
You could try sucking from the caliper end to get it going. Probably best with a syringe but i guess you don't have much time

Quiff Wichard
19-02-09, 03:09 PM
??? and whats the outcome?

if Rictus couldnt help ya no one could-

brakes are a SOD !.. and even though I think Iam quite adept- I wouldnt do them onthe day of my MOT.



enlighten us?.

or was it something so daft u ashamed and hid yer stupid heed>>> ?:takeabow:


:D we've all done it . !

Quiff Wichard
19-02-09, 03:10 PM
there is more than one bleed valve on the front as well isnt there??

rictus01
19-02-09, 03:15 PM
He's either kicking himself for an obvious mistake or panicing by now................:smt040

sv_rory
19-02-09, 07:11 PM
I got my friend whos a bike mechanic to pop round, he used a special vacum pump thing to get it going, its perfect now front and back. :)

The bike passed the MOT so im happy :mrgreen: