PDA

View Full Version : SV / GSXR front brake calliper adapter plates SOLD

charlie13
06-03-09, 04:01 PM
Suitable for 99 - 02 curvy SV's. Except for a couple of marks where I fitted them on the bike they are like new. Now surplus to requirements as I'm going for a full gixxer front end and not just the brakes. Full details here http://cgi.ebay.com/ebaymotors/Silver-SV650-GSXR-Front-Brake-Caliper-Adapter-Brackets_W0QQcmdZViewItemQQ_trksidZp1713Q2em153Q2e l1262QQcategoryZ35601QQihZ011QQitemZ320305230124

**SOLD**
thefallenangel
07-03-09, 11:21 PM
can i ask whats the difference between curvy and pointy ones?

Is it the whole distance or something similar?
charlie13
08-03-09, 02:08 AM
Not sure exactly, I expect it's to do with the offsets for discs. Curvys have some offset and as far as i know pointys don't.
yorkie_chris
08-03-09, 02:11 AM
Yup offset is the only difference since the calipers are identical. Fork lug position on the pointy is different to account for this AFAIK.
dirtydog
08-03-09, 10:38 AM
The adapters will fit curveys and pointies
thefallenangel
08-03-09, 11:25 AM
okay if dirtydog says they're okay for pointys i'll take them off your hands.
dirtydog
08-03-09, 11:30 AM
okay if dirtydog says they're okay for pointys i'll take them off your hands.


Trust me I know they will definitely fit pointies (Sv racing parts used my design and measurements to make them)
thefallenangel
08-03-09, 11:36 AM
Charlie hasve you got any photos of them? And can you use normal SV brake lines with these or do they need upgrading?
dirtydog
08-03-09, 11:42 AM
with the current exchange rate they'd set you back about £90 delivered from the US.
thefallenangel
08-03-09, 11:57 AM
Wonder if my old KR1S calipers will fit with these?
charlie13
08-03-09, 02:09 PM
There you go, sorry I didn't post these up sooner. You can see there are a couple of marks from the bolt heads on the plates where I fitted them to the bike, but I never got further than checking the fit. They haven't actually been used. You can use the standard brake lines, no need to change them.

3452

3453
thefallenangel
08-03-09, 02:12 PM
PM me. Having found out my KR1s calipers should fit (as someone on the Kr1s site is running SVthou claipers on his normal forks) then these should work out pretty cheap.
charlie13
08-03-09, 04:59 PM
**sold**