Cable routing info needed.

[Jay12329]

I'm in the middle of re-building my '99 sv650 and I cant work out the routing for the throttle, clutch and choke cables. Can someone post some front end photographs?
Life would have been so much easer if I'd taken the bike apart myself. :rolleyes:

ta
J

[SVDragRacer]

Damn, i just had the carbs off so i could have got some pics. Oh well. The throttle cables should go through the gap on the right off the head stock (as if you were sat on the bike) through the forks and loop back to the controls. The choke goes through the gap on the left and again, through the forks and loop back to the control. There should be a couple of holding brackets for wires on each side of the head stock, if you want to put the cables through them as that keeps them in place.

[shelleyamy]

http://i185.photobucket.com/albums/x132/hugomoss/DSC_0023.jpgI have others if these dont cover what you need, Mike

http://i185.photobucket.com/albums/x132/hugomoss/DSC_0027.jpg

http://i185.photobucket.com/albums/x132/hugomoss/DSC_0039.jpg

[Jay12329]

Thank you your a star :D Just what I needed!

[netsurfer]

For anyone else wanting this, I was searching for this info and unfortunately images above don't work now.

I did however find the info here (https://www.manualslib.com/manual/1101772/Suzuki-1999-Sv650.html?page=354)