skeetly
30-04-09, 07:18 PM
Well the SV goes on saturday so I'm flogging off the bits I have aquired.
Genuine suzuki lower fairings that I bought from amplimator just a few weeks ago as shown in this thread: http://forums.sv650.org/showthread.php?t=128446
Metallic Thunder Grey (YLF)
http://img158.imageshack.us/img158/3373/dscf02426285018.jpg (http://img158.imageshack.us/my.php?image=dscf02426285018.jpg)
All I have done is taken them out of the box and looked at them, the fitting kit is included.
Asking the same as Amp £175.00 plus postage.
R&G crash bungs for fully faired k3. Brand new. Never been out of the box. SOLD
http://img147.imageshack.us/img147/2504/dscf02436332497.jpg (http://img147.imageshack.us/my.php?image=dscf02436332497.jpg)
£80 plus postage
Brand new clutch and brake lever. Pattern parts for k3 £20 plus postage
http://img152.imageshack.us/img152/7743/dscf02466366746.jpg (http://img152.imageshack.us/my.php?image=dscf02466366746.jpg)
Original sv650 bar end weight including screw. small scuff. £10 plus
postage
http://img156.imageshack.us/img156/4176/dscf02526488827.jpg (http://img156.imageshack.us/my.php?image=dscf02526488827.jpg)
Original snow shovel for k3 £15 plus postage
http://img183.imageshack.us/img183/9289/dscf02486381801.jpg (http://img183.imageshack.us/my.php?image=dscf02486381801.jpg)
Original chain guard k3 £5
http://img151.imageshack.us/img151/1755/dscf02496428214.jpg (http://img151.imageshack.us/my.php?image=dscf02496428214.jpg)
Foot rest hanger for k4 gear change side (I think !) £15
http://img2.imageshack.us/img2/8498/dscf02506439657.jpg (http://img2.imageshack.us/my.php?image=dscf02506439657.jpg)
Footrest hanger for k3 brake lever side (I think) £15 plus postage
http://img152.imageshack.us/img152/9356/dscf02516482615.jpg (http://img152.imageshack.us/my.php?image=dscf02516482615.jpg)
Footrest k3 gearchange side £15 (bit worn) (NOT brake side doh..)
http://img179.imageshack.us/img179/9405/dscf02606553808.jpg (http://img179.imageshack.us/my.php?image=dscf02606553808.jpg)
Tool for tensioning steering head bearings on k3 £20 plus postage
STEERING STEM HEAD BEARING CASTLE NUT TOOL, GSXR1000/HAYABUSA/SV & TL 1000 & ANY OTHER SUZUKI USING THE 6 SLOT NUT.
THIS TOOL IS THE SAME AS THE SUZUKI TOOL. PART No 09940-14911 / 09940-14960
THE TWO PART SUZUKI TOOL FOR UNDOING / TIGHTENING THE STEERING HEAD BEARING CASTLE NUT COSTS £80 + VAT = £94.00
THIS ONE IS MADE FROM STAINLESS STEEL , FOR REMOVAL,& RE TORQUEING THE STEERING BEARINGS
THIS TOOL HAS A FEMALE 1/2 INCH SQUARE DRIVE (LIKE A SOCKET) SO YOU CAN EASILY TIGHTEN / UNDO.WITH A 1/2 INCH EXTENSION BAR, RATCHET OR A TORQUE WRENCH TO SET TO THE CORRECT TORQUE.
http://img183.imageshack.us/img183/5388/dscf02646582232.jpg (http://img183.imageshack.us/my.php?image=dscf02646582232.jpg)
Normal seat for k4 brand new delivered in error from george white £20
(stone fly not included)
http://img2.imageshack.us/img2/1311/dscf02536494994.jpg (http://img2.imageshack.us/my.php?image=dscf02536494994.jpg)
http://img2.imageshack.us/img2/9084/dscf02566526237.jpg (http://img2.imageshack.us/my.php?image=dscf02566526237.jpg)
Lowered seat for k3 was on my bike when i bought it and in good condition
£15 SOLD
http://img179.imageshack.us/img179/9584/dscf02546512706.jpg (http://img179.imageshack.us/my.php?image=dscf02546512706.jpg)
http://img183.imageshack.us/img183/217/dscf02556518678.jpg (http://img183.imageshack.us/my.php?image=dscf02556518678.jpg)
http://img408.imageshack.us/img408/2134/dscf02576532648.jpg (http://img408.imageshack.us/my.php?image=dscf02576532648.jpg)
All the above will need to have postage worked out for them or maybe we can do deliverys by 'meet' if close enough.
Cheers.
Genuine suzuki lower fairings that I bought from amplimator just a few weeks ago as shown in this thread: http://forums.sv650.org/showthread.php?t=128446
Metallic Thunder Grey (YLF)
http://img158.imageshack.us/img158/3373/dscf02426285018.jpg (http://img158.imageshack.us/my.php?image=dscf02426285018.jpg)
All I have done is taken them out of the box and looked at them, the fitting kit is included.
Asking the same as Amp £175.00 plus postage.
R&G crash bungs for fully faired k3. Brand new. Never been out of the box. SOLD
http://img147.imageshack.us/img147/2504/dscf02436332497.jpg (http://img147.imageshack.us/my.php?image=dscf02436332497.jpg)
£80 plus postage
Brand new clutch and brake lever. Pattern parts for k3 £20 plus postage
http://img152.imageshack.us/img152/7743/dscf02466366746.jpg (http://img152.imageshack.us/my.php?image=dscf02466366746.jpg)
Original sv650 bar end weight including screw. small scuff. £10 plus
postage
http://img156.imageshack.us/img156/4176/dscf02526488827.jpg (http://img156.imageshack.us/my.php?image=dscf02526488827.jpg)
Original snow shovel for k3 £15 plus postage
http://img183.imageshack.us/img183/9289/dscf02486381801.jpg (http://img183.imageshack.us/my.php?image=dscf02486381801.jpg)
Original chain guard k3 £5
http://img151.imageshack.us/img151/1755/dscf02496428214.jpg (http://img151.imageshack.us/my.php?image=dscf02496428214.jpg)
Foot rest hanger for k4 gear change side (I think !) £15
http://img2.imageshack.us/img2/8498/dscf02506439657.jpg (http://img2.imageshack.us/my.php?image=dscf02506439657.jpg)
Footrest hanger for k3 brake lever side (I think) £15 plus postage
http://img152.imageshack.us/img152/9356/dscf02516482615.jpg (http://img152.imageshack.us/my.php?image=dscf02516482615.jpg)
Footrest k3 gearchange side £15 (bit worn) (NOT brake side doh..)
http://img179.imageshack.us/img179/9405/dscf02606553808.jpg (http://img179.imageshack.us/my.php?image=dscf02606553808.jpg)
Tool for tensioning steering head bearings on k3 £20 plus postage
STEERING STEM HEAD BEARING CASTLE NUT TOOL, GSXR1000/HAYABUSA/SV & TL 1000 & ANY OTHER SUZUKI USING THE 6 SLOT NUT.
THIS TOOL IS THE SAME AS THE SUZUKI TOOL. PART No 09940-14911 / 09940-14960
THE TWO PART SUZUKI TOOL FOR UNDOING / TIGHTENING THE STEERING HEAD BEARING CASTLE NUT COSTS £80 + VAT = £94.00
THIS ONE IS MADE FROM STAINLESS STEEL , FOR REMOVAL,& RE TORQUEING THE STEERING BEARINGS
THIS TOOL HAS A FEMALE 1/2 INCH SQUARE DRIVE (LIKE A SOCKET) SO YOU CAN EASILY TIGHTEN / UNDO.WITH A 1/2 INCH EXTENSION BAR, RATCHET OR A TORQUE WRENCH TO SET TO THE CORRECT TORQUE.
http://img183.imageshack.us/img183/5388/dscf02646582232.jpg (http://img183.imageshack.us/my.php?image=dscf02646582232.jpg)
Normal seat for k4 brand new delivered in error from george white £20
(stone fly not included)
http://img2.imageshack.us/img2/1311/dscf02536494994.jpg (http://img2.imageshack.us/my.php?image=dscf02536494994.jpg)
http://img2.imageshack.us/img2/9084/dscf02566526237.jpg (http://img2.imageshack.us/my.php?image=dscf02566526237.jpg)
Lowered seat for k3 was on my bike when i bought it and in good condition
£15 SOLD
http://img179.imageshack.us/img179/9584/dscf02546512706.jpg (http://img179.imageshack.us/my.php?image=dscf02546512706.jpg)
http://img183.imageshack.us/img183/217/dscf02556518678.jpg (http://img183.imageshack.us/my.php?image=dscf02556518678.jpg)
http://img408.imageshack.us/img408/2134/dscf02576532648.jpg (http://img408.imageshack.us/my.php?image=dscf02576532648.jpg)
All the above will need to have postage worked out for them or maybe we can do deliverys by 'meet' if close enough.
Cheers.