PDA

View Full Version : Block off plates

phil24_7
04-05-09, 05:46 PM
Anyone know anywhere (excluding e-bay) that I can get some block off plates for my CBR600-RR.

Found some on google but only from the states and would ideally like to find some in the UK.

HRC ones would be perfect but CBR branded ones or plain ones would also be fine.

Regards
Phil
sam anon
04-05-09, 07:36 PM
What are they?
Geoffrey
05-05-09, 11:48 AM
What are they?
they replace the mirror for track days, the mirror acts as a clamp holding the top of the faringing to the front subframe.

http://fatbikez.com/images/product_images/product_image_126.jpg
phil24_7
05-05-09, 05:45 PM
So. Any ideas?
madness
05-05-09, 05:52 PM
You could always have a go at making your own
phil24_7
05-05-09, 06:12 PM
No chance, I want them to look half decent!!
Jase22
05-05-09, 09:41 PM
Try M&P

http://www.mandp.co.uk/productinfo/563450/Bodywork/Mirrors-Universal/Evotech

"Blanking plates" brings up more options.
monkey
06-05-09, 02:34 AM
You bloody tart. Can't you use two single bolts with washers or remove the mirror stalk with one bolt?
phil24_7
06-05-09, 08:58 PM
It's for my track bike so is to be permanent and I want to be a tart!!!
Geoffrey
07-05-09, 11:39 AM
have you considered asking on the cbr forums?
phil24_7
07-05-09, 08:30 PM
The UK site is kinda quiet but I shall give it a whirl!
Sid Squid
07-05-09, 10:00 PM
You tart!

Just use cable ties like everyone else does.
phil24_7
07-05-09, 10:11 PM
It's been established that I am a tart. For this reason, bodges will not be acceptable! :-D
lukemillar
08-05-09, 05:06 AM
This may be a bit late, but...

You tart!
phil24_7
08-05-09, 07:25 PM
Why fank oo!!
monkey
09-05-09, 02:04 AM
I got offered some of these for my Daytona for a fiver.

Do I look tarty?

Have you looked here? (http://www.twinshack.co.uk/prods/78.html) or here? (http://209.85.229.132/search?q=cache:EY5gS_K1_LoJ:www.mandp.co.uk/productinfo/563450/Bodywork/Mirrors-Universal/Evotech+cbr600rr+mirror+blanking+plate&cd=3&hl=en&ct=clnk&gl=uk) or here? (http://www.crankycritic.com/archive00/posters/tart.jpg)
phil24_7
09-05-09, 08:13 AM
I'd have some of the last link if I knew where I could purchase such a gem! ;-)
phil24_7
09-05-09, 08:26 AM
Seen the other 2 and the rizoma ones look ok. I can get a set of HRC ones from the states for less than that though!! (I know, I know. TART!!) :-D