scorpion street extreme can for sale

[skeetly]

JUST TO CONFIRM. EVERYTHING IS INCLUDED TO CONNECT THE SCORPION CAN TO YOUR BIKE EXCEPT A SINGLE STAINLESS CLAMP.
THE 'LINK' PIPE I'M REFERRING TO IS THE SHORT LENGTH YOU GET IN THE BOX TO RECONNECT YOUR OLD CAN WHICH YOU CUT OFF BACK TO YOUR BIKE WHEN YOU SELL THE BIKE ON AND WISH TO KEEP THE SCORPION CAN.

Removed from my k3 pointy. Road legal with the baffle and tested at Oulton park with a decibel meter :D
The baffle is with it.
I still have the scorpion badge that came with it unused.
Its th eone I fitted as show in this thread:
http://forums.sv650.org/showthread.php?t=107155&highlight=scorpion+street+extreme

£100 plus postage.
You will need a new clamp and I rang scorpion today and they will send youa new one out for a tenner posted.
OR buy a stainless banjo clamp from your local bike bits emporium for much less :)

NO link pipe though. Its holding my original exhaust on the bike...
I believe you can get these from scorpion too.

Scorpion Exhausts Unit 3 High Holborn Road Codnor Gate Buisness Park Ripley Derbyshire DE5 3NW
Ripley
Derbyshire

01773 744123

http://www.scorpion-exhausts.com/Bikes/info.php?ex=57

http://img19.imageshack.us/img19/8504/p50700344075552.jpg (http://img19.imageshack.us/my.php?image=p50700344075552.jpg)

http://img6.imageshack.us/img6/7061/p50700384166695.jpg (http://img6.imageshack.us/my.php?image=p50700384166695.jpg)
http://img5.imageshack.us/img5/9887/p50700374143686.jpg (http://img5.imageshack.us/my.php?image=p50700374143686.jpg)
http://img5.imageshack.us/img5/6003/p50700354082929.jpg (http://img5.imageshack.us/my.php?image=p50700354082929.jpg)
http://img5.imageshack.us/img5/5444/p50700364108399.jpg (http://img5.imageshack.us/my.php?image=p50700364108399.jpg)

[FlyinCustard]

wud it fit a curvy?

[skeetly]

I have no idea :)

[Jamiebridges123]

I think they are different link pipes, however I'm sure Scorpion would set you up with one.

E: Found this post may give you an insight.. I'm falling asleep so can't really look for much else..

http://forums.sv650.org/showpost.php?p=1234797&postcount=9

[Bibio]

pm'd ya m8.. cash waiting...

[Jamiebridges123]

Selling your MIVV then? :rolleyes:

[Bibio]

Selling your MIVV then? :rolleyes:

depends if this baby fits the headers... if it does then no but i will sell the can..

if it dont fit then yes it will be up for grabs...

[etuna]

i'll have second dibs if Bibio doesnt take it

[BigFootIsBlurry]

Please put me in the queue for this aswell, I'll take it if the above drop out.

[etuna]

is this sold then?

[skeetly]

Pending the transfer of cash once I sort meself out; yes it is.

[metalmonkey]

Scorpion won't sell link pipes, clamps, brackects ect I called them today and asked, they said the stopped selling them 4 years ago!

So any ideas where I can all the things I would need to attach it to my bike,

[skeetly]

Well I phoned them up and asked them for a clamp as the supplied one was too small to reattatch the old can. Thats why I have one clamp with it. The other is on the bike. They would have sold me one there and then but after asking why they sent one out FOC straight to the dealers where I part exed the bike.
I mentioned selling the scorpion on and that someone might need clamps etc and they said that would be OK.
I only asked about clamps and the 're-fixing of old can' tube though.
The link pipe may well be a different issue..as per the big red writing the link pipe IS included. Its the tube you use to refit the old can thats missing as I, strangely enough; refitted the old can when i took the scorpion off. :)
The clamps are called 'banjo' clamps and you can buy generic ones.