PDA

View Full Version : Link pipe and clamps for a Scorpion Extreme Can

metalmonkey
12-05-09, 08:16 AM
Following on from another thread, I need the above to fit the end can to my bike, the I called them up they don't sell parts like this anymore.....It seems that they want people to a can to get the fitting kit:rolleyes: I was like err I don't need can.

So if anyone knows where I can get the right bits let me know. It does appear that the can use a spring to help hold it on.
Geoffrey
12-05-09, 11:27 AM
is the street extreme a larger diameter than the usual uk exhaust, if not have a look on ebay.

someone on here also recommended beowulf for link pipes, may have bee chris yorkie
ferret
12-05-09, 03:52 PM
the guys over at bikebitz are really helpful might be worth asking them if they can help you at all.
thefallenangel
12-05-09, 03:53 PM
go to halfrauds they have clamps which are 51mm, 54 mm and 57mm which are the main ones you need. My SV has Micron Hi-link pipes and a CCC can on it which needed 2 51-55mm clamps which i got a 54mm one and clamped it up tight. Works fine.
Sally
12-05-09, 03:55 PM
Scorpion don't use clamps, they use the spring only.
Its on their website.
skeetly
12-05-09, 07:02 PM
Weeell My scorpion used clamps. Only a year old.
Maybe they have changed it.
Drew Carey
12-05-09, 07:10 PM
It uses a spring to connect link pipe to can and then a clamp on the link pipe to cut part. I gave Blue the can but unfortunately couldn't give the other parts as need them for my replacement.
skeetly
12-05-09, 07:15 PM
They must have changed them then.
yorkie_chris
12-05-09, 10:34 PM
I usually recommend beowulf for such services, however at the moment, according to carnivore they are very busy so it may be difficult to get seen to.
Geoffrey
13-05-09, 06:40 AM
Scorpion don't use clamps, they use the spring only.
Its on their website.
they use clamps
metalmonkey
13-05-09, 04:29 PM
It is a spring fitment....

I have made several phone calls, no one will sell me one! Can u belive that...I'll try again tomorrow.
Sally
13-05-09, 04:59 PM
I usually recommend beowulf for such services, however at the moment, according to carnivore they are very busy so it may be difficult to get seen to.

Aye, phoned at just past 5 when they close, the guy still had time for me.
Would recommend phoning instead of emailing.

He said around 3-4 weeks for a a high level link pipe.
So aye, theyre quite busy.