PDA

View Full Version : MIVV high level single exhaust for pointy £130 inc del.


bluesv
12-10-09, 06:44 PM
Hopefully I have done this right guys. Sorry if I have broken any rules with this, I checked!

I have sold my blue SV650S and am looking for £130 including delivery for this. It is on Fleabay as well if you are interested. Item Number 170393822177. There are some photos there.

I bought a twin carbon MIVV high level exhaust system for my SV (K6 pointy) before realising that it would only fit a K3 model. Doh! I adapted it to fit by getting the second can link pipe removed and blanked off. I then fitted the bracket with the pillion peg bolts and it fitted perfectly between the seat and indicator. So now it is a high level SINGLE exhaust.

This makes the SV sound like it should have in the first place, I have fitted a noise reducer but it didn't make too much difference lol. As this is a system from the downpipes back remember there is no cutting so can be replace at MOT time.

It really is the muts danglies and is in really good condition. Any questions just ask.

Mike

xXBADGERXx
12-10-09, 07:11 PM
So this doesn`t have the second exhaust can with it then ?

bluesv
12-10-09, 07:22 PM
I have the whole second exhaust can and the cut off link pipe (I'm not sure why I kept all this, lol). But the second exhaust can is in pieces. I drilled out the rivets on it to see how the packing was (it was fine). I just never put it back together.

You can't use this can as a replacement as the connector on the end is different.

But it is there! :)

xXBADGERXx
12-10-09, 07:52 PM
A few rivets and a friend with a Tig welder could get that lot back to it`s former glory then :)

bluesv
12-10-09, 08:16 PM
I wish, I just went and had a look at it, and there is wire wool everywhere.....new I should have paid attention when taking it apart...:D

Really though, I kept the connection (and other can) just in case anyone wanted to connect them back on and got them to cut on a straight bit of pipe so it could be rewelded. When I saw it was K3 only I thought it wouldn't fit, was quite surprised to see it went on with only 1 extra hole drilled on the bike mounting clamp! Sweet.......

All spares can be given if the person buying wants it. (I have no need for them!).

I got a GSXR 750 after 3 years with the SV, a bit of a difference :D.