PDA

View Full Version : Panasonic SDR S10

FG1
28-11-09, 01:55 AM
As I don't use it anymore I am thinking of selling my Video set up.
I have a Panasonic SDR S10 camera,
3 batteries
Mains charger which charges whilst battery is in camera,
Mains charger which charges whilst battery is in cradle,
In car charger which charges whilst battery is in cradle,
USB cable,
AV cable,
Disk,
Manuals.
Also, a stainless steel bracket to mount the camera to the bike which attaches to left side of a pointy radiator. May fit a curvy, I don't know.

Here is a link to the camera:

http://www.trustedreviews.com/camcorders/review/2007/06/30/Panasonic-SDR-S10-camcorder/p1

I am after £125 plus postage for everything.
blueto
28-11-09, 08:25 AM
is it boxed?
FG1
28-11-09, 01:17 PM
I have got the box aswell.
FG1
02-12-09, 12:42 AM
Any interest ??
FG1
03-12-09, 11:03 PM
A quick bump.
FG1
22-01-10, 02:38 PM
Well, seeing as this is still sat at home doing nothing I thought I would add a quick clip to show the picture quality. The sound at speed isnt too good due to wind but that can be reduced by taping up the mic. area.
Anyway, here is a short clip from MacDonalds at Hanger Lane to Ace Cafe, in the rain....

BTW, the camera is mounted on the left hand side of the radiator on a stainless steel bracket.

http://www.youtube.com/watch?v=mtOvkEZtrqM
sunshine
24-01-10, 06:39 PM
great video quality i would be interested if i had the cash, look how amazing that curvy just infront of you looks right at the end :D
SV400Rob
24-01-10, 08:52 PM
Just out of interest what does the mounting bracket look like and is it a home made item?

Rob
FG1
24-01-10, 10:22 PM
It is homemade.
It is a stainless steel triangle with 2 bends in it. I will try and add a picture tomorrow.
SV400Rob
24-01-10, 10:33 PM
Ok cool. I've bought a camera but i need a mount that'll work with a tank bag on the tank as well.
FG1
25-01-10, 01:18 PM
Here are some piccies

http://i37.photobucket.com/albums/e90/tonyw2000/IMG_0137.jpg

http://i37.photobucket.com/albums/e90/tonyw2000/IMG_0139.jpg

http://i37.photobucket.com/albums/e90/tonyw2000/IMG_0138.jpg

http://i37.photobucket.com/albums/e90/tonyw2000/IMG_0140.jpg

As you can see, I use a plastic number plate screw to hold it on. This is because, being plastic it is a nice tight fit and doesn't vibrate loose.

I will try and do some of it fitted shortly.
FG1
25-01-10, 01:49 PM
OK, here are a couple of it fitted to the radiator.

http://i37.photobucket.com/albums/e90/tonyw2000/IMG_0142.jpg

http://i37.photobucket.com/albums/e90/tonyw2000/IMG_0141.jpg
svrider09
25-01-10, 06:18 PM
it it waterproof then? just wondered with using it on the bike?
FG1
25-01-10, 06:56 PM
It is water "resistant".

It has been used in the rain with no problems at all. There is a Youtube link earlier in this thread which was taken in the rain.
monkey
10-04-10, 05:04 AM
Hmmmn. I see you still have this. Hmmmn.