hardhat_harry
28-11-09, 01:11 PM
Hi all,
Finally got all the bits plugged into my track bike to make it go but it won't.
Its turning over but no spark and no power to coils so I suspect it is the keyless start I put in before I checked the bike actually worked (doh)!!
Can someone confirm (via PM if you are concerned that this helps the less law abiding to nick SV's) that the wiring I have done is correct?
At green plug Orange and Red (no tracers) wires shorted together.
At CDI Red wire with orange tracer cut and connect the wire going to CDI to 100 ohm resistor, splice the black wire with white tracer and solder the other end of 100ohm resistor.
Thanks
HHH
Finally got all the bits plugged into my track bike to make it go but it won't.
Its turning over but no spark and no power to coils so I suspect it is the keyless start I put in before I checked the bike actually worked (doh)!!
Can someone confirm (via PM if you are concerned that this helps the less law abiding to nick SV's) that the wiring I have done is correct?
At green plug Orange and Red (no tracers) wires shorted together.
At CDI Red wire with orange tracer cut and connect the wire going to CDI to 100 ohm resistor, splice the black wire with white tracer and solder the other end of 100ohm resistor.
Thanks
HHH