PDA

View Full Version : Curvy--breaking


21QUEST
21-12-09, 09:15 AM
Righto, breaking an unfaired curvy with 30K on the clocks. Bike is taxed/Mot'd and last used Friday, the 19TH Dec.

Possible sell as an almost complete bike...but ready to use as basis for a track day bike/ project/Mini Twin bike. 'Almost complete' because some bits would/might already been taken off. PM for further details.


1) First bit on list is the engine with starter motor at £300
A little bit of weeping from the centre cover on the cluth side. I bought a new O Ring but never got round to putting it on. That would be provided if I can find it or you get £10 off price. Due an oil and filter change which I would do, unless you want to carry that out yourself. In that case, take another £25 off the price.

I'd also include a free set of carbs which has a bit of a crack at the section the choke plunger goes in(caused by giving a bit too much of a tap trying to free choke. This was a while back now so has obviously worked fine).

2) Radiator with fan/switch(actually off a faired bike) in good condition £80 plus p+p

3) Robby Moto Sports Rearsets.http://www.extremebykesportz.co.uk/xcart/customer/home.php?cat=631
Lower part of the gear change lever cracked from my rear stand catching it. I I just taped it up and carried on using it :D. They are about £30 to replace and that has been taken into consideration SOLD

4) Front Discs. Straight, true SOLD
5) Standard Foot Rest Hangers SOLD
6) Baglux Tank Cover ?

7) Tank...SOLD

8 ) Bar ends SOLD

9) Luggage Racke SOLD

Weather is a bit crappy for pics(need to give bike a clean anyways lol) so will add ASAP. Feel free to make offers folks ;)



Cheers
Ben

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00107.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00106.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00105.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00104.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00103.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00102.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00101.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00100.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00099.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00098.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00097.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00096.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00095.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00094.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00093.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00092.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00091.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00090.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00089.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00088.jpg

http://i911.photobucket.com/albums/ac316/simpleeasyy/DELL/DSC00087.jpg

Neeja
21-12-09, 04:14 PM
What condition are the discs in? Are they OEM? Any idea of the thickness of them?

Cheers

21QUEST
22-12-09, 11:28 AM
What condition are the discs in? Are they OEM? Any idea of the thickness of them?

Cheers
OEM Bud.

Good condition...passed MOT in August and have done about 4000K since them.

As of Friday when bike was last used, no pulsing at lever etc. I shall measure thickness and get pics later.


Cheers
Ben

monkimagic
27-12-09, 01:40 AM
Hi mate

Are you breaking the complete bike? Do you have a hugger and cowl?

suzijax
27-12-09, 11:52 AM
Have you got any bar ends as i have some very wrong ones on my sv at the mo :oops:

Alpinestarhero
27-12-09, 12:05 PM
I would be interested in the ignition barrel / switch assembelly, providing its not crap and you can supply keys with it

maviczap
27-12-09, 01:09 PM
I'd be interested in the little black plactic infils beneath the riders seat

21QUEST
28-12-09, 02:57 PM
Hi mate

Are you breaking the complete bike? Do you have a hugger and cowl?
Hiya, yes, breakign completing bike. No hugger or cowl Bud.


Cheers
Ben

21QUEST
28-12-09, 03:00 PM
I'd be interested in the little black plactic infils beneath the riders seat
Hiya £10 for the pair plus postage.


Cheers
Ben

5hort5
28-12-09, 05:10 PM
Do you have a fuel tank then Ben? If you do what's the condition and colour?

21QUEST
28-12-09, 05:20 PM
Do you have a fuel tank then Ben? If you do what's the condition and colour?
We already spoke about it when you enquired about sub-frame about :p

It's red and has a wee ding(paint not cracked) . Apart from that, it's it really really good condition. Definitely take some pics tomorrow for you ;)


Cheers
Ben

5hort5
28-12-09, 05:29 PM
Ahh same bike soz Ben thought this was a different bike :-) Yer if you could send over a few pics that would be good thanks

suzijax
28-12-09, 07:00 PM
Soz to mither but you didnt answer are you selling bar ends

21QUEST
28-12-09, 08:48 PM
Soz to mither but you didnt answer are you selling bar ends
Farrk.....soz mate. I definitely still have a pair. I shall have a look to confirm condition and let yo know.


Cheers
Ben

suzijax
28-12-09, 09:03 PM
Thanks appreciate that

devil1
28-12-09, 10:53 PM
hi have you got speed idle adjuster and the front wheel speedo drive please how much posted to preston cheers billy oh and i need back light bulb holders

Neeja
28-12-09, 11:06 PM
Still waiting on pics of the front discs, too :)

21QUEST
30-12-09, 02:23 PM
First post updated with pics.

Bike been stood for about two weeks now gence Rusticc surface on discs.

Update thread again later tonight.



Cheers
Ben

hardhat_harry
30-12-09, 02:38 PM
Do you have the gear selector rose joint?

And the short upper engine bolts that connect to the frame (not the rods)

suzijax
30-12-09, 07:24 PM
Them barends are perfect if your selling i will have them off you let me know how much and how to pay you thanks

maviczap
30-12-09, 07:25 PM
Got me plastic infils this morning, cheers Ben

maviczap
30-12-09, 07:26 PM
Is that a Baglux tank protector in the pics?

is it ok?

Neeja
30-12-09, 08:41 PM
Are the marks on the discs light scoring or just the pattern in the metal?

21QUEST
31-12-09, 09:59 AM
hi have you got speed idle adjuster and the front wheel speedo drive please how much posted to preston cheers billy oh and i need back light bulb holders
Hiya, the rear bulb holders(the plastic you fit the bulbs into) are part of the loom, aren't they. Or are you talking about the metal braket that the rear light attaches to?

Anyhoos, if it's the plastic bits which are part of the loom, yeah, you can have a couple of those, as got a loom, I can rob those off.

Speedo drive, got trapped and a break in wire , which has been soldered and taped up, Apart from that works as it should ...but best to mention that .

All bulb holder(if I've understood correctly), speedo drive and adjuster delivered £40.


Cheers
Ben

21QUEST
31-12-09, 10:17 AM
Do you have the gear selector rose joint?

And the short upper engine bolts that connect to the frame (not the rods)
Hiya,

Re bolts, you mean the ones you'd normally remove to fit the crap Suzuki(or crap aftermarket) frame protectors? Got the rose joint too.
£16 delivered for them.


Cheers
Ben

21QUEST
31-12-09, 10:19 AM
Them barends are perfect if your selling i will have them off you let me know how much and how to pay you thanks
Hiya,

Sorry didn't get back yesterday.

£15 delivered and payment online transfer is best.


Cheers
Ben

21QUEST
31-12-09, 10:26 AM
Are the marks on the discs light scoring or just the pattern in the metal?
Hiya, I'd say bit of both....definitely got some scoring but the pads were never down to metal :o so just usual scoring.

It's a difficult one, with things like brake discs really. Definitely no pulsing, no warped.

Best thing I can say with regards to you being happy is, "I'd have them back if you aren't happy with them"...you only pay postage back.


Cheers
Ben

21QUEST
31-12-09, 10:29 AM
Is that a Baglux tank protector in the pics?

is it ok?

Hiya, it's a Baglux tank protector indeed.

It's okay as in, it's definitely going to protexct your tank :p hehe .

It's fine Bud. A bit of fray of the stap in front(see pic), and if you look the middle (rear of petrol filler) you can see where stitching has come off/bit of wear.

All in all, it'd do what it says on the tin :D


Cheers
Ben

21QUEST
31-12-09, 10:53 AM
Got me plastic infils this morning, cheers Ben
Good work by Royal Mail :)


Cheers
Ben

ridelikeaturtle
31-12-09, 10:56 AM
PM sent on the monorack and plate.

:thumbsup:

btw, I'll be offline for a few days, so if I don't reply immediately it's because I'm in the west of Ireland ;)

Neeja
31-12-09, 11:00 AM
Hiya, I'd say bit of both....definitely got some scoring but the pads were never down to metal :o so just usual scoring.

It's a difficult one, with things like brake discs really. Definitely no pulsing, no warped.

Best thing I can say with regards to you being happy is, "I'd have them back if you aren't happy with them"...you only pay postage back.


Cheers
Ben

I'll pass on these for now, then. I only want a pair because my current discs have become scored and look similar to those :D

Once I've got the bike fully back together and rebuilt the calipers I'll take a proper look at the condition of my discs - may be a bit on the thin side, so might need replacing anyway

21QUEST
31-12-09, 11:21 AM
PM sent on the monorack and plate.

:thumbsup:

btw, I'll be offline for a few days, so if I don't reply immediately it's because I'm in the west of Ireland ;)
Just sent you a PM , before seeing this. Tis all good...will keep it aside

...be in the West, getting pished then lol


Cheers
Ben

21QUEST
31-12-09, 11:27 AM
I'll pass on these for now, then. I only want a pair because my current discs have become scored and look similar to those :D

Once I've got the bike fully back together and rebuilt the calipers I'll take a proper look at the condition of my discs - may be a bit on the thin side, so might need replacing anyway
Sounds good.

If your discs are not warpped or summat like that and their job properly, I'd say, save your money really...especially if you might be getting ridding of soon anyways :)

Sure, buyer might knock off a bit, when/if you sell but makes sense to do it that way :D


Cheers
Ben

jimmy-james
31-12-09, 01:07 PM
I could do with the front master cylinder, front brake lever and the rear brake pedal if you have it and its all in GWO.

21QUEST
31-12-09, 01:27 PM
I could do with the front master cylinder, front brake lever and the rear brake pedal if you have it and its all in GWO.
Front master cylinder is from an N...is that what you need? I might have one off a faired though.

Re rear brake lever, I should have one but I have to locate it first lol. Should do so tonight.

All in very GWO...took a sec or so to work what 'GWO' meant :D

Be back to you tonight.


Cheers
Ben

jimmy-james
31-12-09, 03:20 PM
Front master cylinder is from an N...is that what you need? I might have one off a faired though.

Re rear brake lever, I should have one but I have to locate it first lol. Should do so tonight.

All in very GWO...took a sec or so to work what 'GWO' meant :D

Be back to you tonight.


Cheers
Ben
Naked all the way mate ;) have you got a rear brake lever as well?

suzijax
31-12-09, 04:38 PM
Hiya,

Sorry didn't get back yesterday.

£15 delivered and payment online transfer is best.


Cheers
Ben

Thats brill will paypal do if so let us know your details

21QUEST
01-01-10, 11:44 AM
jimmy-james, suzijax

Will PM you later. The weather is not too bad today so going to give bike a wash and take a few bits off it...


Cheers
Ben

Avenger
02-01-10, 05:48 PM
Dont suppose you have the undertray/numberplate assembly?

jimmy-james
04-01-10, 08:44 AM
Did you get anywhere with the prices mate?

devil1
04-01-10, 01:51 PM
quest this is what i need,
number plate light,
rear light bulb holder (the parts that the bulbs go into)
idle speed adjuster,
speedo drive,
front loom (from headlight back to main loom)
how does 50 quid posted sound
go on you know you want to :)

ridelikeaturtle
05-01-10, 01:44 PM
Just sent you a PM , before seeing this. Tis all good...will keep it aside

...be in the West, getting pished then lol


Cheers
Ben

Ben, I'm back from Kerry (and collapsing ceilings and a burst water pipe!), so anytime you want to get me that total (to include the postage) then we can arrange a money transfer.

Thanks!

21QUEST
11-01-10, 09:13 AM
Hiya Guys,

I've just made a post on other thread
http://forums.sv650.org/showthread.php?p=2146432#post2146432

suzijax...Check 'inbox' 10.30PM tonight

ridelikeaturtle...same as above lol

jimmy-james...same as above

Avenger...will Pm you and then , you'd be in 'same as above ' category :p

devil1...still looking for all those?...will PM anyhoos



Cheers
Ben

oisinob
12-01-10, 07:39 PM
Hi Ben,

The fairing upper left would be going to Ireland.

Can you do that and how much for delivery?

You don't have the lower fairing then?

Thanks for your reply.

Oisin

bobbleheadbarne
17-01-10, 09:02 PM
hello i need seat bolt if you still have it cheers also intrested in the ign barrel and seat lock is it one key for both and do you have spare key cheers

bobbleheadbarne
17-01-10, 09:03 PM
will you send me a pic of your forks please ta

coolbreeze
22-01-10, 12:53 AM
hi i need a speedo drive and both tyres urgently pleeeease
if you still have them
cheers

killbot87
07-03-10, 12:17 PM
I know jimmy-james was interested in the rear brake pedal, but do you still have it and the the right hand footrest hanger to go with it?
Also the right hand indicator if it's still around ;)

Thanks

jetfish
07-03-10, 06:05 PM
hi ben,

do you still have that engine mate? if so where abouts are you in the country?

cheers
scott

Lucas
07-03-10, 08:30 PM
Baglux Tank Cover still for sell?

21QUEST
08-03-10, 12:01 AM
I know jimmy-james was interested in the rear brake pedal, but do you still have it and the the right hand footrest hanger to go with it?
Also the right hand indicator if it's still around ;)

Thanks
Hiya, I think I recognised that 'wink' ...indies right ?...doh!!! soz.

Brake pedal turned out not to be an SV one. Looks exactly like it but the bit where the master cylinder attachees to it is sort of reversed. It'd still work I reckon.

Anyhoos, if you happy to try it £12 posted with a refund if it happens not to satisfy you. I'm pretty sure it'd work though.

But wiat for me to get a pic first....should explain it better.


Cheers
Ben

21QUEST
08-03-10, 12:08 AM
hi ben,

do you still have that engine mate? if so where abouts are you in the country?

cheers
scott

Hiya Scott,

PM sent


Cheers
Ben

21QUEST
08-03-10, 12:58 AM
Baglux Tank Cover still for sell?
Might be in about 3 days time. I shall let you know, if you'd like me to PM you then.


Cheers
Ben

killbot87
15-03-10, 06:16 PM
EDIT: Sorry, missed out on that reply completely & forgot I even posted in the thread to begin with!

I'll wait for a picture... getting it sent over to Ireland & discovering it was completely wrong would annoy both of us.. if it looks ok though, 12 quid posted is great!

Gazdaman
16-03-10, 06:13 PM
Hi, interested in clocks and headlight, including any mounts. Potentially the front carb.

Gaz

svrich
16-03-10, 08:09 PM
Do you have the front brake discs?

Elltg
16-03-10, 11:21 PM
do you also still have the tank cover mate?

killbot87
19-03-10, 03:16 AM
Just got the right rearset off another guy today, thanks for the help all the same.

joshmac
19-03-10, 04:11 AM
Have you got the reg/rec? Is it working? How much would it be?

Fade
19-03-10, 05:19 PM
Any chances you want to sell the battery tray?

gfewster
19-03-10, 07:15 PM
Wouldn't still have the rear caliper would you?

Cheers,

Graham

Lucas
20-03-10, 05:27 PM
Wouldn't still have the rear caliper would you?

Cheers,

Graham

I got one going if he hasn't, however it does need work, ie stripped and serviced.

gfewster
20-03-10, 06:46 PM
Just managed to source one. Thanks anyhow!

garynortheast
24-03-10, 09:00 PM
Ben, is the front brake lever still available and is it one of the adjustable span ones. Also need a clutch lever if you have one.
Cheers,
Gary.

wahwah
04-04-10, 03:12 PM
Do you have any of these bits?

http://forums.sv650.org/showthread.php?p=2233577#post2233577