PDA

View Full Version : hi to you all

MHP ltd
17-01-10, 07:47 PM
mark and gab's here from mhp, we produce race exhausts in baldock, herts.
we have both raced sv's in the minitwins last year with bemsee, which completed gab's 3rd season.
gab's is a big fan of the sv1000 and suffers the 650, i'm a newby to it all.

we would like to offer our experiences in all facides of the sv's especially the exhaust side.

hope we will be of use to you all.

thanks
Bibio
17-01-10, 07:50 PM
well how about a standard level twin exhaust for the 650?

could even just be the pipework.
Wideboy
17-01-10, 07:54 PM
howdo.... i need a special link pipe but you to far away :(
Lozzo
17-01-10, 08:10 PM
Mark, can I have a go on your missus'














racebike
MHP ltd
17-01-10, 08:21 PM
Mark, can I have a go on your missus'

racebike

she said you can have a go on her but your be half the man you were afters she's finished with you, lol :rambo:
STR
17-01-10, 08:23 PM
im sure my dad zx9 had a mhp pipe on it and it looked and sounded spot on i have an exhaust but its damaged by prev owner might have to save up for a mhp system
MHP ltd
17-01-10, 08:27 PM
well how about a standard level twin exhaust for the 650?

could even just be the pipework.

could do it on a bespoke basis, will need to discuss a few details about your bike.
is your bike modified?
STR
17-01-10, 08:29 PM
Its SV650S K8 sport only mod if pipercross high flow filter and yoshi slip on
MHP ltd
17-01-10, 08:29 PM
howdo.... i need a special link pipe but you to far away :(

we have 3 x carby's, and 2 x K6's on the premises, can i mock it of one of them?
MHP ltd
17-01-10, 08:32 PM
Its SV650S K8 sport only mod if pipercross high flow filter and yoshi slip on

quite a big part of the race support that i do is to repair exhausts.

send me a pic and i'll see what i can do...:salut:
Wideboy
17-01-10, 08:33 PM
we have 3 x carby's, and 2 x K6's on the premises, can i mock it of one of them?

doubt, its a underseat single can, you'd need mine to work round it...... hmm wondering if i can borrow a tranny and drop it up
Bibio
17-01-10, 08:34 PM
could do it on a bespoke basis, will need to discuss a few details about your bike.
is your bike modified?

it will be when i get my new one (K9). it will be lowered by about 2" and have a gsxr600 k4 front end and rear shocky.

just toying with the idea at the moment, will probably do it nearer the end of this summer.
rowdy
17-01-10, 08:35 PM
Hi Mark and Gabs, welcome to the org. and thanks for the response re the fairings.
fizzwheel
17-01-10, 08:41 PM
MHP - Now I dont wish to be a killjoy, but I would point you in the direction of this post

http://forums.sv650.org/announcement.php?f=113&a=97

Particularly the section regarding traders advertising their services or products on the forum.

Now I know that John is away on Holiday at present, but you will need to seek his approval in order to advertise on here. ( unless of course you have done so already )

thanks

Fizz
Bibio
17-01-10, 08:47 PM
MHP - Now I dont wish to be a killjoy, but I would point you in the direction of this post

http://forums.sv650.org/announcement.php?f=113&a=97

Particularly the section regarding traders advertising their services or products on the forum.

Now I know that John is away on Holiday at present, but you will need to seek his approval in order to advertise on here. ( unless of course you have done so already )

thanks

Fizz

i was waiting on that...... :rolleyes:
Lozzo
17-01-10, 08:50 PM
quite a big part of the race support that i do is to repair exhausts.

send me a pic and i'll see what i can do...:salut:

It was Mark who repaired the Akrapovic can I had on my SV after it had been smacked up when Shellywoozle owned it. Mark also recently repaired the Akrapvoic can fitted to my housemate's ZX7R, after the previous owner smacked that up too.

http://farm4.static.flickr.com/3215/2444156180_ddd4d9ee91_b.jpg

A couple of years ago I took a Bandit 600 standard can to him and asked him to weld it to the linkpipe from my friend Kathryn's VFR400 NC24, which he did with alarming accuracy.

http://farm4.static.flickr.com/3020/2693518387_df89526b2d_b.jpg

In short, he's a feckin' genius when it comes to making and repairing exhaust systems. Give this man your custom cos you won't be disappointed
Seggons
17-01-10, 10:36 PM
I'll have to pop down sometime and have a listen. I'm in the market for a nice slip on exhaust. :D
bikerchick82
17-01-10, 10:41 PM
Gabs as in that mad bird with the zx10r?

If so then this place has gone downhill ;)

Nice to meet you Mark :D
Warthog
17-01-10, 11:25 PM
Hey guys, welcome to the site. Always good to have more people with a wider spread of knowledge :).
Wideboy
24-01-10, 10:39 AM
pm'ed an idea.............. not sure if you come on here often

:why: