PDA

View Full Version : Various little odds and sods for a curvy.

Moustachio
03-03-10, 12:39 PM
Having a clear out and found this tin of bits leftover from a curvy I broke a couple of years ago. There's nothing of great value there but quite a few individual bits and pieces that might be of use to someone.
http://i402.photobucket.com/albums/pp107/ceironh/DSC00516-1.jpg
Grinch
04-03-10, 12:17 AM
Did you have a price in mind for the stuff?
Moustachio
04-03-10, 05:35 PM
Did you have a price in mind for the stuff?
Not really. If you can see something there that you need then I'll send it to you for a couple of quid.
Grinch
05-03-10, 10:54 AM
Tell me how much you want for the posting of the tin then and I'll have it off you. All ways nice to have spare and I have 2 bikes to keep going.
Moustachio
05-03-10, 12:57 PM
Updated the photo, a couple of bits have gone.

Sent you a pm Grinch.
cloister
05-03-10, 05:49 PM
http://www.iqscotland.co.uk/washer.jpg

Should be that washer that's gone with the stem nut but if you've already sent the other one it's no big deal.
Moustachio
05-03-10, 05:57 PM
http://www.iqscotland.co.uk/washer.jpg

Should be that washer that's gone with the stem nut but if you've already sent the other one it's no big deal.

That's the one I've sent you mate, I crossed the wrong one out.
Lucas
07-03-10, 10:15 PM
do you have 4 side rubber mounts for the fairing, i.e. part 21?

and 2 screws part 18?

http://www.alpha-sports.com/spst/1999%20SV650,S/54.gif

cheers
phi-dan
07-03-10, 10:25 PM
Unless Grinch has already bagged the lot, can I have this bit?
http://forums.sv650.org/picture.php?albumid=515&pictureid=4119
John McCann
07-03-10, 11:35 PM
if you've got the nuts and bolts from the rear shock linkage I'd like them please

The ones that go through the dogbones
Moustachio
08-03-10, 11:25 AM
do you have 4 side rubber mounts for the fairing, i.e. part 21?

and 2 screws part 18?

http://www.alpha-sports.com/spst/1999%20SV650,S/54.gif

cheers

Are they amongst these? these are all I have:
http://i402.photobucket.com/albums/pp107/ceironh/DSC00562.jpg
Lucas
08-03-10, 11:01 PM
Are they amongst these? these are all I have:
http://i402.photobucket.com/albums/pp107/ceironh/DSC00562.jpg

don't think they are the one...

anyhow, just noticed the shiny gold thingy near top RHS of your photo, are they the swing arm slider/bobbins?
phi-dan
16-03-10, 07:23 PM
Unless Grinch has already bagged the lot, can I have this bit?
http://forums.sv650.org/picture.php?albumid=515&pictureid=4119

Received this in the post today - mirror not wobblynow :-)
cheers!
Baz
18-03-10, 12:31 PM
Don't suppose you have the bolt and washer for the small rear mudgard?

Numbers 5 and 6 in the pic.

Cheers
appollo1
18-03-10, 01:33 PM
are the gold things top left on main picture paddock stand bobbins?
neillyg72
20-03-10, 10:59 AM
dont suppose you have the top fork spring spacers?
Moustachio
20-03-10, 12:26 PM
Don't suppose you have the bolt and washer for the small rear mudgard?

Numbers 5 and 6 in the pic.

Cheers

I don't think so, I'll have a look.

are the gold things top left on main picture paddock stand bobbins?

Yes they are, in a bit of a state though, lots of the paint has come off.

dont suppose you have the top fork spring spacers?

Quite sure I don't sorry.
speedycoi
22-03-10, 10:41 PM
just looking at the pic posted can you tell me if they are a set of crash bobbins in the bottom right and if you still have them :rolleyes:..
Moustachio
23-03-10, 10:04 AM
just looking at the pic posted can you tell me if they are a set of crash bobbins in the bottom right and if you still have them :rolleyes:..

Those are bar ends, sorry mate.
Binky
24-03-10, 01:20 PM
Don't suppose you have a reg/rec kicking about anywhere do you?
Moustachio
24-03-10, 06:49 PM
Don't suppose you have a reg/rec kicking about anywhere do you?
No I don't sorry.
speedycoi
25-03-10, 09:24 AM
just wondered if you still have the bar ends and what £ you would like for them as i had a slight off on mine and damaged the one and the other is a bit tatty Thanks
Moustachio
25-03-10, 02:42 PM
just wondered if you still have the bar ends and what £ you would like for them as i had a slight off on mine and damaged the one and the other is a bit tatty Thanks

Well, one of them is in good condition, the other has freakishly shed all it's paint. If either or both are of any use to you send me a pm.
wahwah
04-04-10, 03:14 PM
Do you have any of these bits in that biscuit tin?

http://forums.sv650.org/showthread.php?p=2233577#post2233577 (http://forums.sv650.org/showthread.php?p=2233577#post2233577)
garynortheast
04-04-10, 07:21 PM
Is this stuff for the S model? If it is do you have the bolt and captive nut for o/s mirror bolt cover and a sleeve nut for one of the o/s mirror bolts?
beabert
05-04-10, 12:24 PM
Any custard creams in the tin
Moustachio
05-04-10, 01:50 PM
Do you have any of these bits in that biscuit tin?

http://forums.sv650.org/showthread.php?p=2233577#post2233577 (http://forums.sv650.org/showthread.php?p=2233577#post2233577)

I'll take some photo's of the bits I have left and you can have a look for yourself .

Is this stuff for the S model? If it is do you have the bolt and captive nut for o/s mirror bolt cover and a sleeve nut for one of the o/s mirror bolts?

It's from and S model yep.

I've got one the mirror sleeve nut things.

Any custard creams in the tin

Sorry mate, they're not for sale.
garynortheast
05-04-10, 11:02 PM
How much for the mirror sleeve nut posted please and how would you like to be paid?