PDA

View Full Version : Where to get OEM parts at reasonable costs?


Scrawf
29-05-10, 04:07 PM
Had a bit of an off on my SV650S! :mad:

Could anyone reccomend a good place to get replacment parts? I need cowlings and fairings, new screen and fitting bits and bats.

Can anone point me in the right direction? All the dealers seem to be in cahoots and it seems like getting part numbers is a web of mystery!

Scrawf

Speedy
29-05-10, 08:30 PM
Probably best try breakers if you don't wanna pay retail prices.

Or ebay?

The dealers will all be in "cahoots" because they will mostly charge the full retail prices.

Mighty Boosh
29-05-10, 08:47 PM
Had a bit of an off on my SV650S! :mad:

Could anyone reccomend a good place to get replacment parts? I need cowlings and fairings, new screen and fitting bits and bats.

Can anone point me in the right direction? All the dealers seem to be in cahoots and it seems like getting part numbers is a web of mystery!

Scrawf


Try putting a post in the wanted section.

Here>> http://forums.sv650.org/forumdisplay.php?f=114

You don't ask, ya don't get.:smt115

DarrenSV650S
29-05-10, 08:51 PM
Join gixxer junkies and pm redcar motorcycles. Much cheapness to be had on oem stuff

SV650Racer
01-06-10, 12:43 PM
Had a bit of an off on my SV650S! :mad:

Could anyone reccomend a good place to get replacment parts? I need cowlings and fairings, new screen and fitting bits and bats.

Can anone point me in the right direction? All the dealers seem to be in cahoots and it seems like getting part numbers is a web of mystery!

Scrawf

Us dealers get a price file from Suzuki so all charge roughly the same. Some of us friendly dealers will also offer an ORG members discount. BUT bear in mind we only get 15% margin on certain panels:cool:

wahwah
01-06-10, 01:07 PM
I was in a similar position, to get all the bits needed it was going to cost over £220 at suzuki's book price (which all the dealers seem to stick to).

Got the lot (and more) on ebay for around £70.

Crazy Dave
01-06-10, 06:15 PM
How bad was the off, i had some plastic welding done on mine and repainted, it come out a treat.
I can recommend a guy if your anywhere near Manchester.