PDA

View Full Version : SV650 R&G crash bungs.

Stig
21-06-10, 07:03 PM
1st generation (I think) R&G crash bungs. Used. Small scuffs on the rubber bits but not ground away at all. This is the one with the bar which goes all the way from one side, through the engine mounts and out the other side.

It's complete as in has the required nuts as well.

£25 + postage.

SOLD
malongworth
22-06-10, 11:39 AM
wil they fit sv650s 08?
Noble Ox
22-06-10, 11:57 AM
If they fit a k6, then I'm intereseted!
Stig
22-06-10, 12:01 PM
I have no idea if they fit the pointy. I would guess no. Different frames and all that jazz.
Noble Ox
22-06-10, 12:17 PM
I'm just after the bungs and screw. But yeah, probably wont fit!
John McCann
22-06-10, 04:55 PM
If you can do them for £25 posted I'll have them...
Stig
22-06-10, 07:59 PM
If you can do them for £25 posted I'll have them...

I'll do them for £25 + postage. :)
Gabriel2k
23-06-10, 04:12 PM
Would these fit a curvey with the lower fairing without cutting?
Stig
23-06-10, 07:09 PM
Mine was a naked so don't really know where the fairings fit. If it helps the crash bungs go on where the front engine bolts are. So if you can see those bolts (probably not) then the answer is likely to be yes. Some one with a faired curvy will probably be better answering.
martin15s
23-06-10, 08:38 PM
IIRC one side has to be cut - dab of paint on the bolt, offer up fairing and drill.....
Stig
29-06-10, 09:08 AM
Sold.