Tail Tidy for a 1999 sv?

[Hobo]

Hi foulks,
iv been reading a lot about the tailtidys but as yet i havent found one that will give differences and possibly a picture or two? iv got a naked curvey not sure what version but is a 99 T. any ideas K?

Any help on this matter would be appreciated if you need different indicators etc?

Cheers Hobo

[Geodude]

Just fitted an undertray to my curvy see here http://forums.sv650.org/showthread.php?t=145062 (http://forums.sv650.org/showthread.php?t=145062)
There isnt a tailtidy available for the curvy just an undertray but there is a template for a cut down standard undertray made by org member zunkus on here if you search for it :)

Edit: added info for template follow the thread here http://forums.sv650.org/showthread.php?t=153625&highlight=template

[mep]

My 99 curvy had a tail tidy when I bought it. It is worth doing. It looks like a template was used to cut the lower tray piece. The light is the standard rear light behind some new part with 2 holes for the light. It seems fairly simple as I 've had a route around the rear end when I just about managed to fit a touring Scottoiler behind the number plate, which is fixed to a bent aluminium bracket.

[Geodude]

Mep, any idea on the make of that tray?

[WeegieBlue]

I know this is an old thread but found this - expensive but available:

http://www.intobikes.co.uk/products/001743/002423/Powerbronze_Tailguard_suitable_for_Suzuki_SV650_S_ 1999?bf=1&rg=60&sg=OR&sf=latest&sd=DESC

[benji106]

I know this is an old thread but found this - expensive but available:

http://www.intobikes.co.uk/products/001743/002423/Powerbronze_Tailguard_suitable_for_Suzuki_SV650_S_ 1999?bf=1&rg=60&sg=OR&sf=latest&sd=DESC


Thats what I have on mine, in the carbon look, was on the bike when I bought it, I never realised it cost £150! looks smart though.

[WeegieBlue]

Do you have the indicators inset like that or are yours still on stalks?

[benji106]

Do you have the indicators inset like that or are yours still on stalks?

No, mini indicators on stalks, from the side of the reg plate mount. I dont think that the rear fairing bits are part of the tail tidy in that pic, for a start that is a big solid peice of fairing all the way down the rear side(s) of the bike isnt it? Mine is just the undertray part anyway.

[WeegieBlue]

You're lucky to have got that included for free. I'm torn between paying for a pro one of building my own using the template that's knocking about. The pro one will essentially be easier to fit and look perfect, but the home made one will be super cheap.

Decisions decisions.....