Speedo Drive sensor and wire

[Scott S]

Mine appears to have given up the will to live :(

It is working intermitently (less and less often) and I took it off tonight to take a look at it and it's pretty much past it's useful life, with bits falling off etc.

Anyone able to help me? I have a few long trips coming up over the next few weeks and knowing how far I have travelled will be good with the lack of a fuel gauge......

[Bunks]

Mine appears to have given up the will to live :(

It is working intermitently (less and less often) and I took it off tonight to take a look at it and it's pretty much past it's useful life, with bits falling off etc.

Anyone able to help me? I have a few long trips coming up over the next few weeks and knowing how far I have travelled will be good with the lack of a fuel gauge......

I have one from a K6. The wire was cut but if it is the right one for you it could be soldered and then shrink wrap tubing put over it to waterproof it. That's what I did for my GSXR front end and didn't have a problem.

[yorkie_chris]

Mine appears to have given up the will to live :(

It is working intermitently (less and less often) and I took it off tonight to take a look at it and it's pretty much past it's useful life, with bits falling off etc.

Anyone able to help me? I have a few long trips coming up over the next few weeks and knowing how far I have travelled will be good with the lack of a fuel gauge......

What model? They are different depending if you have a X>K4 or a K5>


P.S you sure you need full part not just rotor?

[Scott S]

Mine s a 1999 curvy, not sure what 'K' model it is though....

The only part that is broken is the part that connects to the wheel.

Sorry if the description is poor :sad:

[yorkie_chris]

If it is 99 it is X model, 2000 was Y, 2001 was K1... geddit :)

you need the rotor, not full sensor, it is £15 or so from dealers, not too bad.

it's the tube looking bit with the cross on the end... the "lugs" forming the cross snapped off it right?

[Scott S]

If it is 99 it is X model, 2000 was Y, 2001 was K1... geddit :)

you need the rotor, not full sensor, it is £15 or so from dealers, not too bad.

it's the tube looking bit with the cross on the end... the "lugs" forming the cross snapped off it right?


It isn't often that a mans words please me so much........yes, I think it is just the 'lugs', so hopefully I'll be able to get a new part this week.

Thanks for the info, it is very much appreciated.

[petevtwin650]

See this thread for more info, Scott

http://forums.sv650.org/showthread.php?t=148680&highlight=rotor

[Scrappyracer]

Is this what you`re after? £5 plus £2 p&p. Off my 2000 curvy. Pay by Paypal & I`ll post today. Pm me for email address. Daz

[Scott S]

Is this what you`re after? £5 plus £2 p&p. Off my 2000 curvy. Pay by Paypal & I`ll post today. Pm me for email address. Daz

If you PM me your paypal address, I'll send the money over.

[Scott S]

Money sent (I paid the fee).

[yorkie_chris]

better to PM than post your address in open :)

[Scott S]

better to PM than post your address in open :)

That was a bit of an iFail......... I was using my phone and posted it in here instead of the PM. Quite silly really, but post edited.

[Scott S]

The second hand one was delivered yesterday and the new rotor for my current one should be here on Monday, so I'll have a backup.