cct help again

[stew]

Hi all orgers

Need help with the front cct on my 1999 curvy.
its makeing a ticking noise so guessing it needs some adjusting

1 where is it? I had a quick look cant seem to find it, it was a very quick look.

2 how hard is it to adjust? do i need to remove it compleatly or can i do with it on the bike?

any help or a link to a step by step guide would be very helpfull

thanks in advance peeps.

[husky03]

http://i176.photobucket.com/albums/w166/callumhadd/427_2703-1.jpg

this is the rear but the fronts the same on the lh side of the bike but there will be a spar from the frame that gets in the way, remove the cap circled and with a bike spoke ground down to make a flat head screw driver insert it into the hole and wind the tensioner back, once completely bacl let it shoot forward and reset itself, if it doesn't its goosed.

[stew]

just screw it in or out?
do it up or undo it?

:confused:

[husky03]

you can only screw it one way and when you release it it will pop out-its in the haynes