Full set of Curvy plastics.

[Owenski]

Everything excluding the LHS front upper fairing.

So its the:
Nose Cone
RHS upper fairing,
RHS SKidmarx lower
LHS Skidmarx Lower
LHS Rear Panel
RHS Rear Panel
Rear Centre Piece.

I've no brackets or fixing do-hickys but they are all complete and tidy, with exception to one of the lugs which attaches the centre light on the nose cone. They're in a beautiful array of colours and finishes, some painted some primered but all are complete with out cracks etc.

Anyone interested in getting them out of my shed, £120 for the lot?

postage (at extra cost) or collection option available if required. I've some pics knocking about somewhere if you want to have a look then PM me your email address.

[Owenski]

Will separate if anyone wants perticular bits.

[cbay]

I do believe this is a slight bargain! If only it was for a Pointy...

[LJH]

I need a RHS upper fairing if it has NO cracks at all?

[Owenski]

99.9999999% there are no cracks on any. but I'll check for sure this evening if that suits you.

It'll be £10 postage and call it £20 for the panel?

[toby_smith]

You have a PM!

[LJH]

99.9999999% there are no cracks on any. but I'll check for sure this evening if that suits you.

It'll be £10 postage and call it £20 for the panel?

That will be fine, can you get a pic of it too?

[Owenski]

ROFL!!
What a *****!

http://forums.sv650.org/showthread.php?t=155440&page=2

its the LHS upper fairing I've got the not right hand one

[Owenski]

That will be fine, can you get a pic of it too?


i take it the LHS is of no use to you.

[LJH]

Crap, RHS uppers seem to be non-existant :(, unless its the left looking at the bike from the front? (I doubt)

[sunshine]

rhs upper(as sat on the bike) no good ?
if its usable how much for
Nose Cone
RHS upper fairing,
RHS SKidmarx lower
LHS Skidmarx Lower
posted

And owen how much for the LHS upper, posted?

[Owenski]

If this works then my genius knows no bounds - windows 7 was definetly not my idea though....

These should be the pics of the fairing lowers.

http://forums.sv650.org/attachment.php?attachmentid=8037&stc=1&d=1286529330

http://forums.sv650.org/attachment.php?attachmentid=8038&stc=1&d=1286529336

[Owenski]

And the other panels/plastics:

http://i.ebayimg.com/10/!Bw3byf!BWk~$(KGrHqMOKjEEwWTsZpE0BMK7,Lmq1!~~_35.J PG

http://i.ebayimg.com/04/!Bw3cSvw!Wk~$(KGrHqUOKkUEvuEDCLOcBMK7b+sRqw~~_35.J PG

http://i.ebayimg.com/11/!Bw3c7JwEGk~$(KGrHqQOKiwEwPuEU4,3BMK7ePdw5g~~_35.J PG

http://i.ebayimg.com/03/!Bw3dneQ!mk~$(KGrHqQOKi!Evy(06e0BBMK7g4Hkvg~~_35.J PG

http://i.ebayimg.com/01/!Bw3,60g!mk~$(KGrHqEOKkMEwOQOhDOwBMK7W71N+Q~~_12.J PG

http://i.ebayimg.com/02/!Bw3g5LgCWk~$(KGrHqZ,!hIEv1+0HSMuBMK7t+U)1w~~_12.J PG

http://i.ebayimg.com/14/!Bw3h+n!BWk~$(KGrHqV,!hEEv1+0GgI,BMK7yWFshg~~_35.J PG

http://i.ebayimg.com/09/!Bw3izGwBGk~$(KGrHqV,!g0Ev1+0DB-oBMK71e8q8w~~_35.JPG

I thought the screen and the infill panels had sold but while digging out the fairing lowers found both boxes so they can get chucked in as well. If you're doing a full re-spray / custom option then might as well go whole hog and have those involved in the party as well.

:D

[sunshine]

the nose cane downwards and lowers, what would you be after? im looking at converting my naked into fully faired so any mounts would also be great but i can botch it on together :D

[Owenski]

Morning sorry, I didnt notice your previous post, Im currently waiting on another member to confirm if they'll be buying the lot or not so I'll have to wait until after his decision is made before I can give a difinative answer.

However the rear portion which you dont want is about the least valuable/desireable part of the offer, an ultimatly I just want them all out of the shed.
At £120 for the nose cone LHS upper, both lowers, sceen and infils £120 is still a bargain price and if dont need them get them sold on ebay, maybe make a few quid back so you've got your self an even bigger bargain.

If you were adamanet that you didnt want the rear section then I guess £100 for the rest of them plus postage obviously.

[Owenski]

This is all still available, goes on eBay asap.

[Owenski]

Anyone doing a project over the winter after any of these pannels?

I've everything for a curvey excluding the RHS upper and the front mudguard.
NOTE I ALSO HAVE A SET OF LOWERS!!

all are various colours/various stages of been primed.

For a few extra quid I would prime the lot in a uniform finish ready for painting in a colour of your choice.

[Ricerocket]

Anyone doing a project over the winter after any of these pannels?

I've everything for a curvey excluding the RHS upper and the front mudguard.
NOTE I ALSO HAVE A SET OF LOWERS!!

all are various colours/various stages of been primed.

For a few extra quid I would prime the lot in a uniform finish ready for painting in a colour of your choice.

The lowers in the pics above you still have is it? How much are you looking for them?

[Owenski]

yeah its the lowers as in the pic above.
Skidmarx IIRC.

No brackets are included, not sure whats required.

[sv650ollie]

how much for both lowers mate ?

[Owenski]

sorry the lowers are now sold,they should be somewhere in ireland by now. its just the other remaining plastics still available for now on. again, sorry I should have posted something up to say they'd gone.