View Full Version : Everything for a Curvy x 2 and then some!
Breaking two SV's and loads more.
Due to (good) unforseen circumstances, I'm going to break the Bucket and the other SV I have. I'm very sorry to do it but it means lots of loverly bargains for you lot :)
as everyone was so good in getting the Bucket mark 1 on the tarck, I'm passing the stuff on at whatever I managed to get it for. Sort of mates Mates rates :)
New stuff in bold...
2 x Carbs £75 each
Race Radiator and grill protector
Good engine with K&N race oil filter and race oil in it.
Poorly engine. Runs but knocking
2 x swinging arms (one with new bearings! Worth a fortune!!) Two with shark fins
1 curvy frames. 99 reg with V5 Excellent condition!
Front wheels x 3 two silver one dark grey
3 x pair front discs
3 x rear wheel's one half polished dark grey, one dark grey, one silver
3 x std rear discs
1 x rear calipers
2 x sets front calipers.
2 x tanks,
2 x throttles, one with R6 conversion
2 x yokes
1 x blue rear braided hose
1 x std rear hose
1 x curvy rear plastics
1 x curvy front seat
1 x Curvy rear light (some silver overspray, easy to remove
2 x wheel spindles, back and front
2 x front mudguards
2 x airboxes
1 x new std air filter
1 x throttle cables[COLOR="Red"](One sold)
1 x choke cables(One sold)
1 x std can
2 x batteries
Curvy Clocks
Pics of everything in bold now on page 6 of this thread (http://forums.sv650.org/showthread.php?p=2409907#post2409907)
R&G Crash bung mounts (no bungs add your bungs to it) (£40 posted)
R&G Chrash bung set, one side slightly worn £55 posted)
R&G bar ends £20 posted
R&G exhaust hanger £35 posted
Maxton 0.8 springs
Mint set of Hel Brake lines (stainless) 3 hoses £60 posted
Penske Sport 8900E shock £295 posted
1 x supersprox 45 tooth sprocket
2 x New Renthal 45 tooth HA rear sprockets £22 posted
M4 exhaust can and link pipe. Small scratch at the front end. Cut 1cm off and re-rivet and it's gone.
2 x 14 tooth 530 renthal front sprocket (SV1000) £7 posted each.
Same rules as last time Everything £1000 ono its all got to go. :)
Edit: As I have to put a price up for everything, every item is £1000 ONO and if your ONO happens to be £975 lower, thats fine
C
Speaky69
18-10-10, 08:22 PM
If you decide to sell seperatly, how much for the rearsets? :p
Interested in a few bits if you wanna split
Sorry, I should have made that clearer.
As I have to put a price up for everything, every item is £1000 ONO and if your ONO happens to be £975 lower, thats fine ;)
Basically you know what they are worth so make an offer (inc P&P) and if its' good, its yours. if I think you are taking the mick, we might have to discuss it a little :)
Basically I'd like to have all of this cleared and sold for next weekend so i can actually see the floor :)
and there's even more to add to the list now :) I've been shopping :)
I'm just in from a 6 hour drive and I'm knackered and I can see there's already 11 pms to sort out so I'll work them through in the order they came in tomorrow.
I can tell you that the Harris rear sets have gone along with a few other bits from folks who sent a message to my phone.
I'll try and keep the list as current as possible.
Cheers,
C
andrewsmith
18-10-10, 10:38 PM
C you still ok with the offer for the under tray?
I'm guessing the Bucket Mk2 is coming?
Yep, I've got that put aside.
I'm getting a lot of PM's with "How much for..."
I dunno, you tell me! Make an ONO offer and if its groovy, its yours. I'm very flexible (I can touch my toes and everything! :) )
This is an exercise in clearing space as much as selling stuff. :)
C
flak monkey
19-10-10, 02:30 PM
Do you have a curvy side stand?
Yep, but get in quick because someone want the springs off it and I'd rather sell it whole. Its also got the switch still attached.
C
barwel1992
19-10-10, 03:03 PM
pic of the harris filler cap ? and will it fit my k3 and how much you looking for
http://www.corporateflyfishing.com/images/minitwin129.jpg
Its got a bit of overspray on it (dust) from the yellow paint job now but a toothbrush and some toothpaste and it'll come off. £35 posted. If I've got time on Thursday I'll do it.
C
barwel1992
19-10-10, 04:36 PM
ahh sorry C after a black one :)
thanks any way
barwel1992
19-10-10, 04:49 PM
thats effort ;) lol
toby_smith
19-10-10, 05:38 PM
Fussy f*&ker! I'd have it if it was pay day!
What colour are the tanks, good condition?
Standard indicators? - will faired indicators fit a naked?
Naked clocks or the plastic backing?
Thanks.
One is white and yellow and has two small dents and one is silver, no dents. Both need a respray.
C
C'mon shoppers, Make me some offers. I need the space ;)
Find it on Ebay and knock 20% off.
C
startrek.steve
20-10-10, 09:02 AM
How much for a front disc?
Steve
See, now folks still aren't getting it :)
You say "I'd like a Set of front discs for £XX"
and I say "OK, they'll be in the post on Saturday" :)
C
What colour are the tanks, good condition?
Standard indicators? - will faired indicators fit a naked?
Naked clocks or the plastic backing?
Thanks.
Sorry missed that bit.
The indicatorsare sexy mini ones (nice deep amber too) will fit either bike and the clocks are faired model clocks showing 36K miles.
It looks like I'm going to have to photograph the whole lot. and I really don't want to do that.
C
Some pics...
http://www.corporateflyfishing.com/images/ebay/tyres16.jpg
http://www.corporateflyfishing.com/images/ebay/tyres17.jpg
http://www.corporateflyfishing.com/images/ebay/tyres18.jpg
http://www.corporateflyfishing.com/images/ebay/tyres19.jpg
http://www.corporateflyfishing.com/images/ebay/tyres20.jpg
http://www.corporateflyfishing.com/images/ebay/tyres21.jpg
http://www.corporateflyfishing.com/images/ebay/tyres22.jpg
http://www.corporateflyfishing.com/images/ebay/tyres23.jpg
http://www.corporateflyfishing.com/images/ebay/tyres24.jpg
http://www.corporateflyfishing.com/images/ebay/tyres25.jpg
http://www.corporateflyfishing.com/images/ebay/tyres26.jpg
http://www.corporateflyfishing.com/images/ebay/tyres27.jpg
http://www.corporateflyfishing.com/images/ebay/tyres28.jpg
http://www.corporateflyfishing.com/images/ebay/tyres30.jpg
http://www.corporateflyfishing.com/images/ebay/tyres32.jpg
http://www.corporateflyfishing.com/images/ebay/tyres33.jpg
maviczap
20-10-10, 06:10 PM
Need naked model throttle, clutch & choke cables, which ones are the ones you've list C ?
Sorry they're the S model.
C
maviczap
20-10-10, 06:18 PM
Shizzle
Beaverboy10
20-10-10, 06:50 PM
hi im currently looking around for some candy blue lowers, is there any chance you could post a picture? thanks
I'll be back down south on Friday and I'll post pictures of everything for you.
C
Mate have you got a curvy gear pedal and left rider foot peg?
I think so. There's a set there that have some scratches on them but they may be off a pointy. I'll take some pics for you Friday.
C
sorry, also do you the left hand foot rest hanger from a curvy or crash bungs for a curvy?
again, I'm not sure if the footrests are off a pointy or a curvy.
I have the R&G engine mount plates which are excellent but the crash bungs are scratched from my off.
C
barwel1992
21-10-10, 10:54 AM
just so you know C the fuel cap won't fit a pointy as its needs a 5 bolt/3 bolt your one (4bolt) will fit 99-02
you still got the indicators and would they fit a curvy with no mods needed?
any pics of them?
Also, apart from teh standard can you got any others?
The indies would fit straight on. Pics tomorrow
Sorry, only a standard can.
C
Headlamp (brand new) £50 posted
Indicators (4) £12 posted
http://www.corporateflyfishing.com/images/ebay/today10.jpg
Bar end indicators (brand new) with bar ends £25 posted
http://www.corporateflyfishing.com/images/ebay/today11.jpg
Clocks showing 36K £45 posted
http://www.corporateflyfishing.com/images/ebay/today12.jpg
Full lock set £60 posted
http://www.corporateflyfishing.com/images/ebay/today13.jpg
Akrapovic front system. No can or strap. (Cans regularly on Ebay, like 5 a week, for £80 quid)
£75 posted. Any can will fit it. This cost me over £300 4 months ago!
http://www.corporateflyfishing.com/images/minitwin124.jpg
Supersprox rear sprocket. 45T. Zero wear (because its a Supersprox!) £35 posted
http://www.corporateflyfishing.com/images/born004.jpg
Reg/rec and ECU £30 each posted
http://www.corporateflyfishing.com/images/born009.jpg
More pics:
http://www.corporateflyfishing.com/images/ebay/todayc.jpg
http://www.corporateflyfishing.com/images/ebay/todayd.jpg
http://www.corporateflyfishing.com/images/ebay/todaye.jpg
http://www.corporateflyfishing.com/images/ebay/todayf.jpg
http://www.corporateflyfishing.com/images/ebay/todayg.jpg
http://www.corporateflyfishing.com/images/ebay/todayh.jpg
http://www.corporateflyfishing.com/images/ebay/todayi.jpg
http://www.corporateflyfishing.com/images/ebay/todayj.jpg
http://www.corporateflyfishing.com/images/ebay/todayk.jpg
http://www.corporateflyfishing.com/images/ebay/todayl.jpg
http://www.corporateflyfishing.com/images/ebay/todaym.jpg
http://www.corporateflyfishing.com/images/ebay/todayn.jpg
http://www.corporateflyfishing.com/images/ebay/todayo.jpg
http://www.corporateflyfishing.com/images/ebay/todayp.jpg
http://www.corporateflyfishing.com/images/ebay/todayq.jpg
http://www.corporateflyfishing.com/images/ebay/todayr.jpg
http://www.corporateflyfishing.com/images/ebay/todays.jpg
http://www.corporateflyfishing.com/images/ebay/todayt.jpg
http://www.corporateflyfishing.com/images/ebay/todayu.jpg
http://www.corporateflyfishing.com/images/ebay/todayv.jpg
http://www.corporateflyfishing.com/images/ebay/todayw.jpg
http://www.corporateflyfishing.com/images/ebay/todayx.jpg
http://www.corporateflyfishing.com/images/ebay/todayy.jpg
You've got until Saturday night to grab any bargains you might need then the whole lot is going on Ebay under user name "Minitwinspares"
So get those offers in sharpish! :)
You'll get it cheaper here than Ebay :) It'll save me listing it :)
C
barwel1992
22-10-10, 09:53 PM
will the headers fit a k3 ?
Sorry mate, just sold them. and yes, they would have but the rear mount might have needed a small bridge.
C
barwel1992
22-10-10, 10:16 PM
ahh ok no worries :)
Everything away bar the exhaust. I ran out of tape.
Next lot going out Monday.
Cheers,
Carl
Ok, I've set up an Ebay shop for the rest of the stuff and you can find it on Ebay under
Minitwinspares (http://shop.ebay.co.uk/minitwinspares/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1)
Hopefully I'll have the lot listed by tomorrow night.
husky03
23-10-10, 06:03 PM
been asked any stupid questions yet mate??:D
hi i dont suppose you have a curvey left hand side (gear change) drivers foot rest hanging bracket?
Collis
Via mobile
I've got a left hand hanger but I don't know if its a curvy or pointy. The gear lever end has snapped off.
Have a look at the pics and let me know if its the right one.
C
Scott S
24-10-10, 03:35 PM
Any rear seats left? Mine is a 1999 'X' curvy.
I was certain I had clipped it into place this morning before I set off, but obviously not...... :smt104
Yep, still got one rear seat. and one front.
£20 posted?
Scott S
24-10-10, 03:46 PM
Yep, still got one rear seat. and one front.
£20 posted?
That'll do me, just let me know how to pay.
Right, you lot. I've just spent 9 hours straight listing things on Ebay!
Buy something :)
And I'm still nowhere near finished :)
C
i'm buying something, just not via ebay.
alanellis
27-10-10, 08:52 PM
Hello there,
Actually could be interested in a few bits ,but to start with will offer 50 quid for the forks I would pick them up.
My mate Max from the NEMCRC passed this on to me we both do minitwins with them .My number is 07921366669 if you would like to talk.
Cheers
Alan
Hi Alan, I'll give you a bell in the morning
Cheers,
Carl
New stuff added to first page and I've had a clear up of what was there.
Cheers, C
husky03
31-10-10, 09:36 AM
carl what 180 tyres you got left mate???
Noot at the moment. Second request in as many days! Three weeks ago I could have got you a years supply for buttons :)
I'll keep my eyes open though.
C
Photos of the latest additions in bold on the first page:
http://www.corporateflyfishing.com/images/ebay/ebay001.jpg
http://www.corporateflyfishing.com/images/ebay/ebay002.jpg
http://www.corporateflyfishing.com/images/ebay/ebay003.jpg
http://www.corporateflyfishing.com/images/ebay/ebay004.jpg
http://www.corporateflyfishing.com/images/ebay/ebay005.jpg
http://www.corporateflyfishing.com/images/ebay/ebay006.jpg
http://www.corporateflyfishing.com/images/ebay/ebay007.jpg
http://www.corporateflyfishing.com/images/ebay/ebay008.jpg
http://www.corporateflyfishing.com/images/ebay/ebay009.jpg
http://www.corporateflyfishing.com/images/ebay/ebay010.jpg
http://www.corporateflyfishing.com/images/ebay/ebay011.jpg
http://www.corporateflyfishing.com/images/ebay/ebay012.jpg
http://www.corporateflyfishing.com/images/ebay/ebay013.jpg
http://www.corporateflyfishing.com/images/ebay/ebay014.jpg
Berlin tried PM'ing you, your inbox is full.
toby_smith
31-10-10, 07:55 PM
I wondered where my sexy bike bits had gone!
bigchris
31-10-10, 08:00 PM
How much for the fender extender and hugger?
I've cleared a bit of space but as fast as I do it keeps filling up :)
Big C
£40 shipped for the pair?
Lowers now sold.
C
barwel1992
31-10-10, 09:25 PM
out of interest (for now) how much you looking for the M4 ?
£80 inc postage ONO :) or summic like that.
and I have no idea what postage would be on it either :)
C
toby_smith
31-10-10, 10:12 PM
out of interest (for now) how much you looking for the M4 ?
Barwel, It's a ****ing awesome can and I paid a hell of a lot more than Carl is selling it for it not very long ago!
Screen, hugger, Bar ends, Clutch cable, Choke cable, Clear indies and fenda extenda now sold :)
I'm going to need a bigger van in the morning! :)
C
Screen, hugger, Bar ends, Clutch cable, Choke cable, Clear indies and fenda extenda now sold :)
I'm going to need a bigger van in the morning! :)
C
:thumright:
hope you still got the footrest hangar for me, you'll have payment for them in the next few days (as soon as the banks transferes some money)
GeneticBubble
01-11-10, 05:38 PM
How much for the front calipers buddy?
£60 posted including really good HH pads.
£50 without pads posted.
These aren't manky either, they're really clean and working well.
Cheers, C
Southgate
02-11-10, 10:24 AM
Got my reg/rectifier through the post this morning.
Top man to deal with!
Scott S
02-11-10, 02:12 PM
My things were delivered on Friday (couldn't pick them up until yesterday). Many thanks.
GeneticBubble
02-11-10, 07:30 PM
£60 posted including really good HH pads.
£50 without pads posted.
These aren't manky either, they're really clean and working well.
Cheers, C
Is it possible to keep these to one side for me and i will take them off you on the 12th when i get paid?
Yep, no problemo.
Set aside with the other stuff thats already reserved :)
Cheers, C
dbracing
03-11-10, 10:11 PM
Do you have a carby radiator in reasonable condition please?
Thanks
Dan
Hi Dan, Yes, I've got one with and one without a fan. The one without the fan is lockwired for racing and has a guard on the front. I still have the fan to go back on if required. From your username I'm presuming this one would be of more interest?
Cheers,
C
dbracing
03-11-10, 10:59 PM
Yeah. I killed my mates one when I crashed it at cadwell the other week. I've got to restore it so I need a decent rad for it. What sort of money you after for it as its coming out of my race fund for next season :( so doing it on the cheap ;)
Cheers
Dan
Will you lot PLEASE put what it is you've bought and your address in the info box with your paypal payments :)
I've got 20 payments and not one clue what any of it is for. Cross referencing it against 400 pm's isn't the most fun you can have. Just becasue your address is whith paypal, doesn't mean I can see it when you send a payment.
Cheers, C
Everything paid for is now out and on its way :)
The rest is on standby :)
Cheers,
C
hi do you have a speedo rotor?
WeegieBlue
07-11-10, 06:58 PM
Do you still have the braided lines and are they brand new?
The only mark is that one of them has a "squash" mark where it has been tie wrapped to the yoke. A quick and gentle reshape with a pair of pliers and it'd good as gold. Apart from that they look like they've just come out of the packet.
Cheers, C
ppbayeta
08-11-10, 12:36 PM
Hi, how much for the front seat, seat cowl and grab rail blanks and an original tool kit shipped to spain?
Thanks
toby_smith
08-11-10, 04:39 PM
Do you still have the braided lines and are they brand new?
The brake lines did about 100 miles, 150 absolute tops
Hi, how much for the front seat, seat cowl and grab rail blanks and an original tool kit shipped to spain?
Thanks
I'll get you a price for this on Saturday when I'm home,
Cheers,
Carl
Quite amazingly, 80% of the stuff I've sold has gone to the Norfolk area around Norwich and Ipswich! That's a coincidence that is! :)
C
WeegieBlue
08-11-10, 07:46 PM
The only mark is that one of them has a "squash" mark where it has been tie wrapped to the yoke. A quick and gentle reshape with a pair of pliers and it'd good as gold. Apart from that they look like they've just come out of the packet.
Cheers, C
Is everything I'm going to need included or am I going to need to pick up any attachment bits?
If they are literally good to go once I get them I'll take them off your hands. How much posted?
ppbayeta
08-11-10, 09:53 PM
ok, waiting news from you
Thanks
Next in line for the braided lines.
lloyd_christmas
12-11-10, 05:46 PM
Do you have a pillion seat?
Sorry, all three Pillion seats now gone.
C
Is everything I'm going to need included or am I going to need to pick up any attachment bits?
If they are literally good to go once I get them I'll take them off your hands. How much posted?
£60 posted, They include all of the Stainless banjo bolts too.
Cheers, C
normski3
15-11-10, 11:41 PM
Hi how much do you want for the brake callipers and disks please :)
NICK004298
16-11-10, 06:22 PM
can i have the regulator/rectifier tried to pm you but your mail box is full cheers nick
Sorry about that Nick. All of the reg recs have now gone.
Cheers, C
List now updated
Cheers, C
vBulletin® , Copyright ©2000-2025, Jelsoft Enterprises Ltd.