SV650 K5 Breaking

[hindle8907]

Me and YC Spent the day breaking my SV650N K5 well YC did breaking I just made brews haha !,
most parts in good condition as the bike only covered just over 6000 miles unfortunately it was written off as a CAT B due to the lock stop being cracked on the frame and front end damage.
It had a GSXR 600 k1-k3 front end conversion.
http://i384.photobucket.com/albums/oo290/hindle8907/bike1.jpg


Parts not available
The engine has been sold as a whole. (pending pick-up)
The Radiator is damaged/leaking.
The bent Forks have gone to YC ,I still have the yokes have been binned.
The Can is now on my curvy.
Gear Selector damaged.

Available Parts (Photos available on request)

Air box and Filter
Rear Wheel (SOLD)
Rear Disk (SOLD)
Rear calliper no pads, brand new pads available (SOLD)
Full rear break assembly (SOLD)
GSXR k1-k3 Tokico Callipers with pads
Black Hel braided lines with fittings (SOLD)
GSXR k1-k3 Front Disks
Subframe Slightly Bent - Free for local pick-up.
RHS Switch gear with cables and throttle tube (SOLD)
LHS Switch gear had small crack photos available
Seat Cowl some scratches (SOLD)
Cowl Infills (SOLD)
Speedometer displaying around 6600 Miles
Head light brackets pre cut for GSXR conversion (SOLD)
Seat Infill's
Riders Seat (SOLD)
Pillion Seat (SOLD)
Expansion Tank
Side Stand
Side Stand Switch
Rear wheel swinging arm adjusters
Suspension linkage
Standard rear shock
Pillion Pegs
Rear Spindle (SOLD)
Hall effect speedo sensor pre-wired plug and play ready for GSXR/magnets conversion
Reg/Rec
Standard Bar Risers
Renthal black Low bars
Sprocket and Sprocket carrier (SOLD)
Throttle Bodies
Gun Metal Suzuki Meter cover/Mini Fly screen with brackets (SOLD)
Naked Bowl headlamp working SOLD
Tank Prop
Original Suzuki break lever
Grab rail (some small marks hardly noticeable photos available)
Full set of a locks with 2 keys (tank/Seat/Ignition)
Fuel Pump
Fuel Tank
Rear break light
Full wiring Loom
x10 Disk bolts
x1 Rear LHS/RHS Plastics
Full power ECU
33 BHP ECU (SOLD)
Standard exhaust system.
Tidy Tail (SOLD)

[hindle8907]

Carbon hugger Available
Belly Pan (SOLD)

[barwel1992]

thermostat plz PM me payment detail's :D

[husky03]

man that was a nice looking bike

[Stonesie]

What condition are the rad and oil cooler covers in and how much?

[buckstone]

Interested in seat cowl & fittings and hugger when / if available .....

[DarrenSV650S]

Dibs on the mirrors if they are not scratched, and the left mirror mount. Also the throttle/RH switchgear assembly and the throttle cables please

edit- also the front MC cap

[weecorey]

Could you give me a price and first refusal on the following parts please?

Rear wheel
Tank, what condition?
Airbox

[svsam]

pm'd how much for the front wheel to, some ****** put a breeze block on the road when he fell off in fornt of me!

[barwel1992]

^ the front wheel is gsxr

[paiste]

Hiya Ant.
How much for the tail tidy? Do you know what make it is?

[hindle8907]

Just checking from my phone at the pub, I can see lots of pm's i will go off a first come first server basis from time of pm or post in thread I will try reply to you all tonight if possible thanks.
Ant.

[svsam]

oh yeah :S

[paiste]

Cough.... ehem.......:shock: ;)

[barwel1992]

he's ill according to his facerape status ;)

[hindle8907]

thermostat plz PM me payment detail's :grin:

ill pm you once I have removed it from the engine still connected at my mates place down the road.



Dibs on the mirrors if they are not scratched, and the left mirror mount. Also the throttle/RH switchgear assembly and the throttle cables please

edit- also the front MC cap

Daz mirros are dented and not in the best of condition tbh, left mirror mount and RHS switchgear with cables have you name on.

Interested in seat cowl & fittings and hugger when / if available .....
Pm'ed

Hiya Ant.
How much for the tail tidy? Do you know what make it is?

dan its a Evotech one slightly bent from looking at it but its still connected to the sub frame I will take it off tomorrow and have a good look probably straighten out with a bit of force .

[barwel1992]

cool, and pics of the other bits plz :)

[hindle8907]

got them on my phone will upload for your tomorrow mate ;)

[barwel1992]

cheers :D

[Speedy]

PM'd

[DarrenSV650S]

Daz mirros are dented and not in the best of condition tbh, left mirror mount and RHS switchgear with cables have you name on.

Ok. So how much for the left mirror mount, the right hand switchgear, throttle tube, throttle cables?

[hindle8907]

Ok. So how much for the left mirror mount, the right hand switchgear, throttle tube, throttle cables?
pm'd

[hindle8907]

bbbbbbbbbump

[barwel1992]

pics ! lol

ps got the thermostat out yet ?

[hindle8907]

^^ Pm'ed

[kerby]

Riders footpegs any good mate?

[RingDing]

How much for the lockset?

[hindle8907]

Riders footpegs any good mate?

no mate rhs sold and lhs is fubared

[hindle8907]

How much for the lockset?

Pm coming your way

[metalmonkey]

Are the rear plastics are ok, without any damage? Is the tank still in good condition?

If so what colour code are they? If they are the Candy Blue colour, then I will have them please.

[hindle8907]

i think yours is the lighter colour out of the two blues judging by avatar,
The tank is the darker blue but I do have the LHS and RHS rear tail plastics in excellent condition in the lighter blue available.

[Berlin]

Do you have the little triangular doo hickies for checking rear wheel alignment? If so, I'd like 'em.

Cheers, C

[hindle8907]

Ill have a peek later for you mate.

[Owenski]

u still got those tail sections in the colour of my bike that you offered me before?

[hindle8907]

u still got those tail sections in the colour of my bike that you offered me before?

they are under offer to someone pending photos pal if he doesn't want them then I will pm you.

[hindle8907]

How much for Gun Metal Suzuki Meter cover/Mini Fly screen with brackets?

Pm'ed

[bobw1985]

Have you got a LHS tail section in candy grand blue (YC2)?

[davepreston]

waiting on the price for black rear sections my good man
same pleas as before
mmmmm lovely christmas pressie they would make lol

[badsaboy]

do you have the rubber gromit which is behind the little black inserts? if so how much posted?

[Drumming_Animal]

Any chance you have a clutch lever still? And do you have a gear lever?

I would have liked the tank but looks like its already gone, ah well

Also are the Hel brake lines still available??

[hindle8907]

Do you have the little triangular doo hickies for checking rear wheel alignment? If so, I'd like 'em.

Cheers, C

Sorry pal went with rear spindle

Have you got a LHS tail section in candy grand blue (YC2)?

Is this the darker of the two blues if so yes but it would need repair.

waiting on the price for black rear sections my good man
same pleas as before
mmmmm lovely christmas pressie they would make lol

Pm'ing after i finish this typing ;)

do you have the rubber gromit which is behind the little black inserts? if so how much posted?

behind the seat infill's ?

Any chance you have a clutch lever still? And do you have a gear lever?

I would have liked the tank but looks like its already gone, ah well

Also are the Hel brake lines still available??

Tank is not sold yet but i have promised some one photos of it with some other parts if they dont want it its yours. Hel lines are still available.

sorry for the hold up on photos I have promised people some of the bits are located else where.

cheers Ant :santa:

[badsaboy]

yup. its the little almost triangle looking thing. There are rubber gromits on the frame as there is only one allen screw in the centre!

[Drumming_Animal]

Sent you a message good sir :)

[bobw1985]

Is this the darker of the two blues if so yes but it would need repair.


Yeah it is, what kind of repair? Got any pictures of the damage? Mines only a little scraped was hoping for an easy swap.

[Berlin]

No mention of the frame. Is it available and does it have a V5?

Cheers, C

[cluffy]

Dont suppose you still have the pillion seat and grabrail? if so how much.

Cheers
Danny

[hindle8907]

Yeah it is, what kind of repair? Got any pictures of the damage? Mines only a little scraped was hoping for an easy swap.

cracked.

[hindle8907]

No mention of the frame. Is it available and does it have a V5?

Cheers, C

yes but its a cat-b so needs to be destroyed.

[badsaboy]

any ideas about the rubber gromit??

[graman]

Does the top yoke looK straight & if it is , how much do you want for it?

Graman

[hindle8907]

any ideas about the rubber gromit??

cannot find the gromit mate.

[hindle8907]

Does the top yoke looK straight & if it is , how much do you want for it?

Graman

i just binned it mate just to be on the safe side.

[MikeyW]

Am interested in the calipers and discs, could you let me have a price?

[killbot87]

Seat cowl still provisionally sold?

[Mark650ni]

Do you have the seat cowl still? im actually looking for just the infills, but will take the cowl too if you require?

[hindle8907]

Am interested in the calipers and discs, could you let me have a price?
Pm'ed

Seat cowl still provisionally sold?
Yes sorry

Do you have the seat cowl still? im actually looking for just the infills, but will take the cowl too if you require?

still dealing with someone with the cowl and infill's

[barwel1992]

OI ! you got the thermo yet ? :D

[bluebird]

Do you still have the grab rail, How much do you want for it? Cheers

[sfstu]

hi, do you still have the headlight and the hel brakelines..? if so, any chance you could pm me a pic of the headlight to see how badly scratched it is..? and if you have the hel lines could you measure them for me..? cheers, rgds stu

[sfstu]

^^^bump??!

[hindle8907]

^^^bump??!

pm'ed

[Hoody90]

Hi, sent a PM about the bellypan but haven't got a reply yet. Just wondering if it will be up for sale?

[hindle8907]

nah its sold mate sorry.

[turnerj_2001]

Hi,

Do you still have the tail tidy?

If so how much?

Thanks

[sfstu]

any luck with pics of headlight and measurement of lines..?;)
rgds stu

[paiste]

Hi,

Do you still have the tail tidy?

If so how much?

Thanks

I had the tail tidy off him! Sorry :D

[widget]

Have you got a reg/rec left?

[Tuna]

What about the frame swingarm

[trail guru]

Please will you give me a price and 1st refusal on rear hugger? Cheers. Does anyone know if it WONT fit a pointy K3?

[beno987]

how much for the bars?

[sfstu]

PM'd ya re light;)
rgds stu

[EssexDave]

I'm interested in a few parts if you have them;

Front brake lever
Rear brake lever (Or whole RH rearset)
Entire rear seat unit (as in the plastics going around the brake light etc, I think it's 3 parts and I need all of them.

I think that's it, I may need a tank but not desperate as mine only has a small dent.

Cheers

Dave

[cbay]

Still got the Carbon Hugger? How much you after?

[hindle8907]

Please will you give me a price and 1st refusal on rear hugger? Cheers. Does anyone know if it WONT fit a pointy K3?

Duno about a k3 dont see why not pm coming your way

how much for the bars?

Pm coming

PM'd ya re light;)
rgds stu

inbox has been full still not measured the lines will do it this weekend

I'm interested in a few parts if you have them;

Front brake lever - yes
Rear brake lever (Or whole RH rearset) sold
Entire rear seat unit (as in the plastics going around the brake light etc, I think it's 3 parts and I need all of them. yes got one set left

I think that's it, I may need a tank but not desperate as mine only has a small dent.

Cheers

Dave

pm coming

What about the frame swingarm

Frame is a CAT-B so needs to be crushed, swingarm is still connected to the frame, dont have the tool to remove it. but you can have it when i get round to removing it.

[hindle8907]

Still got the Carbon Hugger? How much you after?

will let you know if trail guru doesn't want it.

Cheers Ant.

[sfstu]

inbox has been full still not measured the lines will do it this weekend

cool..;) hadn't realised about inbox being full..:smt119

[robbie09]

how much are you looking for the rear left hand side plastics? I think thats the right side :S. The one that surrounds the lock for the seat. :P

[sfstu]

in case your inbox is full-have PM'd you....;)

[sfstu]

you got PM...;)
rgds stu

[cbay]

Has Trial Guru taken the hugger?

[ImplodedHamster]

PM 'ed about grab rail and pillion pegs :)

does anyone know if the colour will match a blue K3?

[sfstu]

you got PM...;)
rgds stu

[hindle8907]

Parts Left

Air box and Filter
GSXR k1-k3 Tokico Callipers with pads
GSXR k1-k3 Front Disks
Rear Subframe Slightly Bent - Free for local pick-up.
LHS Switch gear had small crack photos available
Speedometer displaying around 6600 Miles
Seat Infill's
Expansion Tank
Side Stand
Side Stand Switch
Suspension linkage
Standard rear shock
Pillion Pegs
Reg/Rec
Standard Bar Risers
Throttle Bodies
Grab rail (some small marks hardly noticeable photos available)
Full set of a locks with 2 keys (tank/Seat/Ignition)
Fuel Pump
Fuel Tank Some small scratches photos available.
Rear break light
Full wiring Loom
x1 Rear LHS/RHS Plastics in the light blue colour
Full power ECU
Standard exhaust system Free local pickup

[macker]

Do you have the fan switch on the rad!?

[Nelson]

PM sent Hindle :D

[hindle8907]

Do you have the fan switch on the rad!?
no sorry

[MJC-DEV]

Hi, Do you have the tank prop or rear brake lever still?
Mike

[aaron020873]

pm'd about the exhaust.

[toot]

You have a PM Bud.

[chirpy999]

What do you want for the suspension linkage?????

[MisterTommyH]

PM sent about the tank prop and rear light unit.

[madnlooney]

Do you have the 3 screws which hold the front sprocket cover on?

[arcoiris]

Do you still have the Lhs seat infill? (tho I need to check if they fit a K4).

[Devil Biccy]

Don't suppose you have the back cover for the speedo?

[Gordon B]

Hi mate,

How much for the front calipers and pads and will they fit straight onto a naked with standard forks?

[Kenzie]

Any chance of the tool kit flap cover and pin?