K7 GSXR600 Swing arm on a Curvy

[shelleyamy]

My dad's winter project is to put a K7 GSXR 600/750 swing arm on the Curvy(to match the front end).
Have bought the swing arm and shock linkage, and awaiting delivery.
The point of this post is to ask if anyone has access to their swing arm pivot points at the moment, and can post the measurements.

Can't find any posts about this conversion, so will be making it up as we go along.

Thanks
Mike

[maviczap]

I've a curvy swingarm in the garage, what measurements do you need

Won't be super accurate

[shelleyamy]

I've a curvy swingarm in the garage, what measurements do you need

Won't be super accurate

The inner width of the swing arm pivot points.
Thanks
Mike

[andrewsmith]

I think Berlin tried a K1 600 swing arm with a Curvy frame.
Its doable in theroy, with some machining. I don't know how far he got as he's got a bit on atm

http://forums.sv650.org/showthread.php?t=159892

[maviczap]

Length of the swing arm pivot tube is 226cm.

Hope that helps

[shelleyamy]

Length of the swing arm pivot tube is 226cm.

Hope that helps

It does thanks, now i will need to measure the GSXR and decide how much and where from to reduce.
Thanks
Mike