Anybody work in pneumatics?

[Specialone]

Anybody in brum work in pneumatics?
My coffee machine has a burst pipe and i need about 8 inches of 4mm nylon pipe to repair it.
Tried all local places like motor factors etc, but no joy.
Worst case i will buy a coil of pipe from RS components for £14, seems a lot for 8 inch of pipe.
Any help appreciated.

Phil
PS, Merry Christmas :santa:

[barwel1992]

Anybody in brum work in pneumatics?
My coffee machine has a burst pipe and i need about 8 inches of 4mm nylon pipe to repair it.
Tried all local places like motor factors etc, but no joy.
Worst case i will buy a coil of pipe from RS components for £14, seems a lot for 8 inch of pipe.
Any help appreciated.

Phil
PS, Merry Christmas :santa:

fuel line from halfrauds ?

[Specialone]

fuel line from halfrauds ?

Too big :(

[Fruity-ya-ya]

Anybody in brum work in pneumatics?
My coffee machine has a burst pipe and i need about 8 inches of 4mm nylon pipe to repair it.
Tried all local places like motor factors etc, but no joy.
Worst case i will buy a coil of pipe from RS components for £14, seems a lot for 8 inch of pipe.
Any help appreciated.

Phil
PS, Merry Christmas :santa:
I'll as my mate Phil, Phil - however he works with hydraulics.

Fruity - aka JD

[barwel1992]

Too big :(

ahh i could have sworn moped fuel line was 4mm

[Fruity-ya-ya]

I have about 38 meters of yellow perforated gas ducting you can have if that will work ;)

http://lh4.googleusercontent.com/public/pe9iyc2xFr507LPK6fGQXZuCfZu25S-_HYiKDgRM7NuWCzGFoZ8Os06r_oW9BEGuYupKLp425I-ILA3AXEjnvJsdBzihmGG1vWq-a4rhJloCpbDmrrtowVmX6NlxvY66d4E7rqDBJ3h1-9b5zE2dIVRS94mYk2UicMDgeuhLyeMj9B8O_mG2-4fnK1oxpg
(left over from my drive)

Asked my mate Phil who ain't got owt sorry.

[Specialone]

I have about 38 meters of yellow perforated gas ducting you can have if that will work ;)

http://lh4.googleusercontent.com/public/pe9iyc2xFr507LPK6fGQXZuCfZu25S-_HYiKDgRM7NuWCzGFoZ8Os06r_oW9BEGuYupKLp425I-ILA3AXEjnvJsdBzihmGG1vWq-a4rhJloCpbDmrrtowVmX6NlxvY66d4E7rqDBJ3h1-9b5zE2dIVRS94mYk2UicMDgeuhLyeMj9B8O_mG2-4fnK1oxpg
(left over from my drive)

Asked my mate Phil who ain't got owt sorry.

Thanks mr fruity:) it's gotta be 4mm o/d though cos it fits into a brass bush.

[Dicky Ticker]

If you cant get the right size piping cant you use something else and reducers or sleeve the damaged pipe. WOULD IT HAVE TO BE FOOD GRADE PIPING?
Alternatively buy a jar of Nescafe:D

[maviczap]

Loads of 4mm pipe on Ebay

http://shop.ebay.co.uk/?_from=R40&_trksid=p5197.m570.l1313&_nkw=4mm+pipe&_sacat=See-All-Categories

[Specialone]

Loads of 4mm pipe on Ebay

http://shop.ebay.co.uk/?_from=R40&_trksid=p5197.m570.l1313&_nkw=4mm+pipe&_sacat=See-All-Categories

Yeah i know mate, i had looked.
Nylon hose is preferred anyway, but i didnt wanna wait a week with the weather and xmas break slowing delivery times.
Was hoping someone local had a bit lying around, bit of a long a shot i know, but worth a try i guess.