Log in

View Full Version : DataTool S4 Parts - where from?

turnerj_2001
22-01-11, 03:06 PM
Hi Everyone,

Right so i've been working on my bike and whilst putting everything back together I have now lost a small part of my alarm.

for those who have them fitted I believe it could be either the ground or the motion "nudge" sensor. It's a tiny box shape that was screwed in on the metal under my pillion grab handle with 2 wires coming out of it.

I rang up the place where i got it fitted but they have advised me to go to Datatool and suprise suprise no number just a stupid contact us thing.

Does anyone know if i can get a spare one. Checked EvilBay and cannot find anything unless i buy a whole kit (No Ta)

Cheers

JT
B1k3R
22-01-11, 03:19 PM
It sounds like the trigger switch. You can get a new one from Datatool.
turnerj_2001
22-01-11, 05:02 PM
It sounds like the trigger switch. You can get a new one from Datatool.

The only pic i could possible find for it was this. Its the little thing square box on the bottom left. If that is deffo the trigger switch thats brill and can get a new one.
B1k3R
22-01-11, 05:57 PM
I can't see from that picture.
TSM
22-01-11, 06:29 PM
its a standard magnetic switch for the rear seat, any NO type is ok
motion sensor is within the alarm itself
turnerj_2001
23-01-11, 07:43 PM
its a standard magnetic switch for the rear seat, any NO type is ok
motion sensor is within the alarm itself

I take it that i can get a new one from Datatool aswell. Soo Annoyed i lost my original one. Stupid question but what do you mean by NO type is ok????

Sorry im new to all of this.:stupid:
Teejayexc
23-01-11, 08:14 PM
Stupid question but what do you mean by NO type is ok????




If you'd like to turn something OFF when the two halves of your switch are apart, buy the NORMALLY-OPEN (NO) type; to turn something ON when the two halves are apart, buy the NORMALLY-CLOSED (NC) type, and yes Datatool should sell 'em.
yorkie_chris
23-01-11, 08:54 PM
Are you sure? In pic the box (no wires coming out of it) looks more like the magnet than the magnetic switch
TSM
23-01-11, 09:17 PM
Are you sure? In pic the box (no wires coming out of it) looks more like the magnet than the magnetic switch

for those who have them fitted I believe it could be either the ground or the motion "nudge" sensor. It's a tiny box shape that was screwed in on the metal under my pillion grab handle with 2 wires coming out of it.

this is what he wrote
yorkie_chris
23-01-11, 09:20 PM
My mistake sorry.

I may have one on an old loom actually.
turnerj_2001
23-01-11, 11:40 PM
Cheers for all the help guys.I'm hoping datatool message me back as I don't think they publish their phone number.

I'm hoping to get the part this week but will keep you all posted.
TSM
24-01-11, 12:14 AM
datatool = toad security group

http://cgi.ebay.co.uk/REED-SWITCH-MAGNET-SECURITY-CAR-ALARMS-PIN-SWITCH-/320641272926?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4aa7b58c5e
turnerj_2001
24-01-11, 12:35 PM
Message now recieved from DataTool and your right, it is the Reed Switch which I can get from my Alarm Fitter for £5.

Cheers Guys for all the help. Will be reposting if it doesn't work ;)
B1k3R
24-01-11, 01:22 PM
cheers for all the help guys.i'm hoping datatool message me back as i don't think they publish their phone number.

I'm hoping to get the part this week but will keep you all posted.
+44 (0) 1420 541444