Interesting afternoon

[_Stretchie_]

Well it was to me anyway. This afternoon I R been mostly cleaning carbs.

GruntyGiggles' ninja is going up for sale real soon so I am going to give it a service, change the fork oil and clean the carbs for the new owner.

Anyway, got the carbs off and doing them one by one to clean them and the jets/pilot needles and so on and I found that on each chamber, the person before me has managed to trap the edges of every single diaphragm.

http://i76.photobucket.com/albums/j11/Stretchie_/Stuff%20for%20posting/DSCF3275.jpg


http://i76.photobucket.com/albums/j11/Stretchie_/Stuff%20for%20posting/DSCF3277.jpg

So been ringing around to try and get some and find out that there are £23.50 +VAT EACH... EACH..

Oh my life, so that's over £100 for a full set.

Now, the bike had obviously been working fine with them like this, I'm sure many of you saw the bike flying passed on the AR as Grunty was a marker but I just couldn't put them back together as above with a clear conscience, they have been stressed and stretched in those areas, you can see it when you try to pull it straight, and they won't go back in to the correct shape.

Oh well, it needs doing now but £23.50+VAT EACH. What are they lined with magnesium or something?????

[SoulKiss]

Caveat Emptor would have saved you £100 :p

[Owenski]

a certain organ mentioned to me that by placing rubber in a sock and boiling it up in a pan it generally reforms to its manufactured shape... might be worth a shot if it saves you £100

[tom-k6]

a certain organ mentioned to me that by placing rubber in a sock and boiling it up in a pan it generally reforms to its manufactured shape... might be worth a shot if it saves you £100


recycling condoms again? ;)

[Owenski]

recycling condoms again? ;)

hence the expected child ;)

[Specialone]

Having worked in plastics, what owenski said is true, a lot of plastic moulded parts will 'remember' their shape.
Problem you might get is boiling water probably won't get them warm enough, a lot of PP and PVC stuff start to go pliable at around 104 degrees, so salt in the water will help you get the temp towards that figure.

The diaphragms will defo go back to their original shape if heated gently and there not creased or anything.

Personally I would get a heat gun on a low setting and heat them up away from the carbs obviously.
Keep the gun moving, not too close and not in one place and it will be fine.

[yorkie_chris]

If it's running alright, just put them back as they are. You'll know about it if they're leaking, and the rubber is flexible enough that if they're working they're unlikely to split in use.

Trick owenski describes can work on stretched and mullered brake seals.

[Milky Bar Kid]

I are sad that Chez is selling the bike :(

[squirrel_hunter]

I told you not to open them up...

[_Stretchie_]

Cheers guys but I shelled out for the new ones, where the crease is on each, if you pull it and try to straighten it out they are very creased and not too happy about using them again.

Will give the heat a go now though just to see what it does.

[anna]

You have house insurance right????

[caz650s]

I told you not to open them up...

:)

[anna]

:)


You can almost see the wagging finger as he said that too!! [-X[-X

[yorkie_chris]

To be honest I'd never start cracking carbs open if the bike is running fine.

[_Stretchie_]

To be honest I'd never start cracking carbs open if the bike is running fine.

My other post may have been misleading, it was running fine while it was being used but it's been stood since just after the AR and runs a bit lumpy.

Opened them up and thought they looked fine (untrained eye) but after getting the old carb cleaning spray around it all it's much cleaner than it was.

So when I get the new diaphragms it should be sorted.

But I must admit it was partly due to "If you don't try, you'll never learn"

[Bibio]

i know you have already got the parts but you could have given these peeps a ring.

http://www.allensperformance.co.uk/index.html

they were the only place i found that had the bits for my brothers duke and compared to other places they were cheep as chips and we are not talking penny's.

[speedplay]

GruntyGiggles' ninja is going up for sale real soon

:confused:

[_Stretchie_]

:confused:


C'mon dude..

I'll say it in small words for you.


FOR

SALE

Haa haaaa

:smt082:smt043

[speedplay]

Must have missed that somewhere.
Thought she was happy with it.

[_Stretchie_]

Must have missed that somewhere.
Thought she was happy with it.

Oh she loves it to bits, great bike just not too interested in riding any more.

I think it's just one of those things she wanted to prove to herself that she could do, and by god she could.

So the BabyBlade will also be getting the treatment and going but so will my FireBlade (I just want some cash for mine so I can buy more tools :p )

[speedplay]

Fairy Muff.

Still, the biking worlds loss is the eating worlds gain :)

Looking forward to the .org dinner at her restaraunt sometime :)

[Milky Bar Kid]

Oh she loves it to bits, great bike just not too interested in riding any more.

I think it's just one of those things she wanted to prove to herself that she could do, and by god she could.

So the BabyBlade will also be getting the treatment and going but so will my FireBlade (I just want some cash for mine so I can buy more tools :p )


Wait. What? The Fireblade is going too???

[_Stretchie_]

Yep, not just yet, but in a month or two

[gruntygiggles]

For the purposes of clarification...yes, I am selling the Kwak and Babyblade. I just enjoy going fast too much and my family have suffered enough deaths in recent years so rather than risk adding to that, I shall from now on be riding on track only...or possibly getting something rather more sedate in future...but I really did love riding and pushing myself and I know myself too well to believe that I may not be swayed to push myself and possibly...end up hurt or worse.

I'm not stopping riding, just stopping riding on our UK roads!

[Milky Bar Kid]

Track the baby blade. That is my suggestion. I would not like you to sell the baby blade. I love it. I would like a go of it. That is all.

[_Stretchie_]

Track the baby blade. That is my suggestion. I would not like you to sell the baby blade. I love it. I would like a go of it. That is all.

But we've got an older zx6r to track

: )

Either that or you better get down here soonish

; )

[Milky Bar Kid]

But, but it's the BABYBLADE!!!! It's awesome. More awesome-er than a Kwak, even though I like Kwaks..

[blue curvy jester]

at least the roads around brecon will be safe for tarquin mong womble and sylvian dickchese to enjoy teir sunday bimble ;-)

[gruntygiggles]

at least the roads around brecon will be safe for tarquin mong womble and sylvian dickchese to enjoy teir sunday bimble ;-)


I resemble that remark sir!

[Holdup]

£23.50+VAT EACH

Could be worse you could need a certain seal, which isnt available on its own and only comes as a kit, the amount of times people have laughed when ive told them they need to spend lots of money for the 4 seals they want and 20 others they dont

[_Stretchie_]

Could be worse you could need a certain seal, which isnt available on its own and only comes as a kit, the amount of times people have laughed when ive told them they need to spend lots of money for the 4 seals they want and 20 others they dont

Yeah, I spoke to a few places to make sure I wasn't getting ripped off.

They all said I was getting off lightly as many times you can't get the diaphragm on it's own as it comes as part of the piston slider and they are much more expensive.