Curvy clearout.

[Berlin]

Get this stuff out of my garage...

:)

99 Frame, two swinging arms, linkages and std shock. the lot for £100
(Pick up or arrange your own courier)

Throttle and throttle cables £20

Radiator guard £20 Sold
Radiator and fan, £30 Sold

Engine with rumbly bottom end (easy worth £300 if you strip it) £150
(Pick up or arrange your own courier)

Clocks £20 (showing 36 K)

Std can £10 to clear, no scratches
(Pick up or arrange your own courier)

Full set of calipers £75 (no front pads)

Set of front calipers and pads £60 (Inc std hoses)

Two sets of carbs £50 each

Bar end mirrors (new) £20 Sold

Front brake master cylinder and lever £20

rear master cylinder £10

Fuel pump £5

Yokes £20

3 x front mudguards £20 each One Sold

Maxton 0.8 Fork Springs £60 Sold

Pointly bits

Sexy Exhaust hanger for single seat conversion without footpeg, black. Brand new
£25

Thermostat Offers

GSXR 600 K1-K3 parts

2 rear wheels and one front. Offers front and one rear Sold
GSXR600 wiring loom Offers
Rear renthal sprocket and sprocket carrier. Offers
GSXr600 handlebars Offers
GSXR600 Reg rec Offers
2 x GSXR swinging arms
GSXR rear shock and linkages (no it won't do for a conversion, has to go on a GSXR600)



loads more coming...

I want them all gone by the end of next week...

:)

C

[Electro]

Maxton 0.8 Fork Springs £60


Hongman would suit those.

[toxic]

Sexy Exhaust hanger for single seat conversion without footpeg, black. Brand new
£25


will this fit K3 or just those low rider later models?

[Berlin]

Dunno, I'll measure the lenth of it.

Edit: 20cm from the forward nut to the hanger and 17 ftom the rear one. And that's as the crow flies.

C

[Terah]

Interested in the radiator guard if it will fit a naked 99? got a pic?

[Jordy]

Will you take 15£ for the bar end mirrors?

[Berlin]

Will you take 15£ for the bar end mirrors?

Yes, PM sent

Radiator and guard...

http://www.corporateflyfishing.com/images/ebay/todayo.jpg


More Pics in this thread (http://forums.sv650.org/showthread.php?t=158851&page=4)

C

[Terah]

£15 for the radiator guard?

[Berlin]

Don't take the Micky! bear in mind these prices include P&P and are bloody cheap and it'll cost a tenner to pack and send it! ;)

C

[Terah]

Fair enough - didn't think the p&p would be near that bad. Happy with £20.

[Berlin]

Good stuff. :) I've PM'd you

[svStevo]

pm sent

[svStevo]

Get this stuff out of my garage...

:)

99 Frame, two swinging arms, linkages and std shock. the lot for £100
(Pick up or arrange your own courier)

Throttle and throttle cables £20

Radiator guard £20 Sold
Radiator and fan, £30

Engine with rumbly bottom end (easy worth £300 if you strip it) £150
(Pick up or arrange your own courier)

Clocks £20 (showing 36 K)

Std can £10 to clear, no scratches
(Pick up or arrange your own courier)

Full set of calipers £75 (no front pads)

Set of front calipers and pads £60 (Inc std hoses)

Two sets of carbs £50 each

Bar end mirrors (new) £20 Sold

Front brake master cylinder and lever £20

rear master cylinder £10

Fuel pump £5

Yokes £20

3 x front mudguards £20 each

Maxton 0.8 Fork Springs £60

Pointly bits

Sexy Exhaust hanger for single seat conversion without footpeg, black. Brand new
£25

Thermostat Offers

GSXR 600 K1-K3 parts

2 rear wheels and one front. Offers
GSXR600 wiring loom Offers
Rear renthal sprocket and sprocket carrier. Offers
GSXr600 handlebars Offers
GSXR600 Reg rec Offers
2 x GSXR swinging arms
GSXR rear shock and linkages (no it won't do for a conversion, has to go on a GSXR600)



loads more coming...

I want them all gone by the end of next week...

:)

C

pm,d

[SVMAT]

pm'd regarding gsxr rear wheel :)

[Berlin]

List updated.

In negotiations for frame and swingingarms.

[klu]

got a picture of the exhaust hanger?

[Berlin]

Yep, Curvy R&G one and Pointy one...

http://www.corporateflyfishing.com/images/minitwin/bits1.jpg

Also, Ohlins Springs, renthal sprocket (525 45t) and SV1000 Frons renthal Sprockets.

http://www.corporateflyfishing.com/images/minitwin/bits2.jpg

C

[Berlin]

All stuff paid for now dispatched. :)

C

[klu]

I'll have that curvy hanger ;)

You wouldn't happen to have some braided lines you don't want would you?

[Berlin]

PM'd

The only braided lines I have are for a GSXR600 and will fit a cirvt with the bars dropped 30mm down the stanchions, but not in std position.

[zunkus]

Have you got a working fuel sensor?

[Berlin]

Sorry, just sent it out with a tank.

C

[yorkie_chris]

That thermostat might be worth a few quid to someone with a cagiva raptor, apparently they're crap on them so they put SV ones in instead.

[Berlin]

Do we know anyone with a cagiva raptor? :-k

[punyXpress]

dizzyblonde?

[warnshed]

would like the silencer please, will PM you.

[daveyrach]

What year is the curvy, I'm after a LH switch gear with the 9 pin female adaptor.

[Berlin]

Sorry, no LH switch gear, just RHS with cables.

C

[Berlin]

All of this is going on Ebay later today.

It needs to go.
C

[Foln]

A bit late to ask, but do you have the tank prop stand at all?
Also, the pair of domed hex bolts for holding on the side panels?
Cheers :)

[Winder]

The curvy yokes, off a naked or faired bike?

[Berlin]

Faired. and you can have the bottom either silver or black as I'll reno them for you.

C