View Full Version : Lots of curvy and a few pointy bits for sale
EssexDave
06-08-11, 12:57 PM
.
karenpowell
08-08-11, 10:33 AM
hiya dave would the curvy hugger fit our 1999 naked sv650 and if so do you also have a bellypan for the same and if so how much would you do the whole lot for with postage. if not right spares no worries
are the clocks for the curvy faired or naked ones?
EssexDave
08-08-11, 01:04 PM
Clocks are off a Faired bike.
looking for naked ones i'm afraid...
EssexDave
10-08-11, 10:03 AM
Gear lever as in just the foot lever not the linkage itself?
I do believe I have this.
sweepdoggydog
10-08-11, 10:22 AM
Front or rear point sub frame?
I'd like the linkage as messing about with the position of mine..
THe standard rod is prob going to be short so was going to join two to turn the gears up for down .
EssexDave
10-08-11, 12:31 PM
Pointy subframe is a rear subframe.
I do have the gear linkage and lever. £25 posted.
you're welcome to come and collect for £22 (I'm in Rayleigh) or if there's no rush next week I can probably make it to 8 Ball on Wednesday.
No rush as its winter job mods thing.
pauldogs
12-08-11, 09:45 PM
Hi,have you still got gear lever,just lever not linkage,ta
SpikeTM
14-08-11, 08:06 PM
U got curvy starter and solenoid ?
EssexDave
14-08-11, 08:13 PM
I think someone wanted gear lever. I've been away for the weekend so replies will be sent in the early part of next week.
Starter and solenoid yes I believe I have those I will check and Pm you.
SpikeTM
14-08-11, 08:14 PM
K cheers
garynortheast
14-08-11, 09:58 PM
Have you got the curvy tank prop please?
Tis ok let Pauldogs have the gearlever .I'm not modding till winter .
EssexDave
25-08-11, 08:34 AM
Sorry no tank prop :(
devojunior
25-08-11, 03:08 PM
looking for naked ones i'm afraid...
arnt we all lol
martin15s
25-08-11, 04:45 PM
do you still have the curvy clocks?
carpet monster
25-08-11, 08:14 PM
Looking for a throttle tube - with or without grip. Preferably without!
Price please?
philzee
27-08-11, 12:18 AM
Hi do you have the rear brake lever for a curvy?
EssexDave
05-09-11, 11:15 PM
Bump.
did you find that curvy high level link pipe?
Destruktor77
06-09-11, 07:48 PM
What colour are the curvy wheels and have you got any Cam chain tensioners? (adjuster assembly) or brake calipers?
morphaplasm
08-09-11, 08:06 AM
Hi mate, do you still have the hugger for sale? If so, what colour?
Sy-superfly
10-09-11, 11:15 AM
I'm after a set of wheels, but I'm a bit unsure on weather thats each pair price or each wheel?
Chobblington
11-09-11, 11:12 AM
Looking for a blue upper right hand fairing in very good condition. Got any that fit the bill? Also, do you know which shade of blue? Think mine might be the candy blue.
turbokat
13-09-11, 05:28 PM
Hi have you still got the headlights and blue front mudguard and any other bits ,forks ,front subframe etc Thanks
Hi. Got any standard bar ends with bolts and in decent condition?
I need a pointy rear brake pedal / lever. Got One?
Also a can to fit a pointy. Aftermarket or standard :)
EssexDave
14-09-11, 01:15 PM
Afraid not Kas. The bar ends are in poor condition.
EssexDave
14-09-11, 01:16 PM
Orca - I have a stock pointy can as new - but cut. I think I may have the link pipe to attach it but will have to check on that for you.
The only pointy brake lever I have is slightly bent. It could probably be straightened with a bit of heat and time and you're welcome to it for cheap if interested. Please PM as I don't often have time to check this thread thoroughly.
Did you sell the gear linkage rod?
startrek.steve
22-11-11, 08:37 AM
Have you got a good front disc? mines got the clickies..
startrek.steve
22-11-11, 08:37 AM
Arent the curvy sport headlights all one unit? or do you have two complete sets?
EssexDave
22-11-11, 09:19 AM
I have two complete sets of headlights (or had I now have one)
I do have a front set of discs. I will need to borrow a caliper from a friend to check how much is left on them before selling as I wouldn't want to sell you discs that are about to fail!
Tai - Gear linkage rod is available.
I have two complete sets of headlights (or had I now have one)
I do have a front set of discs. I will need to borrow a caliper from a friend to check how much is left on them before selling as I wouldn't want to sell you discs that are about to fail!
Tai - Gear linkage rod is available.
Damn. Sorry mate I was desperate and ordered one from Robinsons that night.
Dont have a rhs infill panel do you?
daveyrach
23-11-11, 01:37 PM
Do you still have the clocks?? Would you be willing to split them as i only need the visor part as the clock glasses are cracked on my curvy.
EssexDave
23-11-11, 08:39 PM
I do have the clocks but I'm in no rush to sell so I'd rather not split.
I do have a RHS infall panel but I'd rather sell as a pair. I can do £15 posted for one or £20 posted for two (Citylink next day delivery)
Bloody linkage rod from Robinsons is too short at 6"! must be 7"! :rolleyes:
How long is the one you have? If its the right size how much? I can whizz over one evening if thast okay?
Cheers
Do you still have the black curvy front fender?
Cheers
EssexDave
24-11-11, 11:59 AM
Bloody linkage rod from Robinsons is too short at 6"! must be 7"! :rolleyes:
How long is the one you have? If its the right size how much? I can whizz over one evening if thast okay?
Cheers
I will have a measure up later today. Popping over is no problems.
I do still have (I believe) a black fender. I will confirm tonight.
I will have a measure up later today. Popping over is no problems.
Did you get a chance to measure it?
bmack999
27-11-11, 12:00 AM
Do you have a curvy rear brake lever?
cheers
EssexDave
27-11-11, 11:56 AM
No rear brake lever I'm afraid.
Tai I will pm you.
No rear brake lever I'm afraid.
Tai I will pm you.
Did you find the black front fender's hiding place?
salchichas
29-11-11, 09:59 PM
Do you have a headligh of an N model?
I do still have (I believe) a black fender. I will confirm tonight.
any luck with finding the front black fender? thanks! :santa:
vBulletin® , Copyright ©2000-2025, Jelsoft Enterprises Ltd.