Pointy bits

[ImplodedHamster]

hiya peoples

breaking my pointy so the parts that i didn't smash are for sale.
(if it isn't listed, it isn't for sale i don't want loads of 'have you got this/that' emails)
all parts of a SV650s K3 colour code YC2


EDIT: updated list is here: http://forums.sv650.org/showthread.php?t=175169



All pictures are here (http://s1236.photobucket.com/albums/ff445/ImplodedHamster/Bike%20bits/), if you want more pictures of something PM me.
all prices are open to offers, you can take a bit away from the posted price and pick up from BN14

Thanks
Rob

[ImplodedHamster]

bump, will be adding more bits tomorrow evening

[ImplodedHamster]

bump, most things added now :)

i have a frame (possibly damaged) and a engine (with broken clutch cover, alternator cover and front rocker cover damage) if anyone is interested PM for pictures and make me an offer. they would be collection or organize your own courier

Thanks
Rob

[MisterTommyH]

What was the paint code for the bike? Guessing if it's a k6 it's candy napoleon blue?

[joshwalker094]

hi there pal, the fuel exhaust, will it fit on to my stock exhaust system, providing i cut the stock exhaust off?

[ImplodedHamster]

What was the paint code for the bike? Guessing if it's a k6 it's candy napoleon blue?

all parts of a SV650s K3 colour code YC2
:-P

@josh, yes assuming you have the link pipe too

[joshwalker094]

i have a full stock exhaust system, so what would i need to do to fit your fuel exhaust?

[ImplodedHamster]

you would need to cut the standard can off, then you would connect the link pipe and end can to where you cut the previous can off, using the clamps and exhaust hanger provided. it's fairly easy, do a seardh on here for a how to guide :)

[joshwalker094]

so do i need to buy the link pipe off you aswell ? ( i have no motorbike knowledge tbh)

[ImplodedHamster]

so do i need to buy the link pipe off you aswell ? ( i have no motorbike knowledge tbh)
yup, you cut the exhaust pipe about 1 inch above the final weld, then attachs the link pipe to that, then the end can to that. you need to link pipe to connect the exhaust pipe to the end can

[joshwalker094]

ok, right well ill pm you

[DarrenSV650S]

Airbox - good condition, all sensors attached, no filter included £25 posted

Yoink! :smt040

[MisterTommyH]

:-P

@josh, yes assuming you have the link pipe too

d'oh ](*,)

[ImplodedHamster]

bump

[The Actor]

I'll take the hugger if it'll fit a k5 naked and has the fittings.

[quik_d]

bugger, i've been on the lookout for an exhaust and link pipe to replace the standard pipe. If anything falls through i'll take the link pipe

[ImplodedHamster]

I'll take the hugger if it'll fit a k5 naked and has the fittings.
nope, just the actual hugger sorry... some of the screws had been stripped when the previous owner put it on, therefore had had to a grider to them to get the hugger off
bugger, i've been on the lookout for an exhaust and link pipe to replace the standard pipe. If anything falls through i'll take the link pipe
sorry, gone now...

[Fifteen15]

Pillion seat came in the post today. Very happy with it, thanks :)

[The Actor]

I'll pass on the hugger then. Thanx for the reply.

[spezer]

Do you have the complete rear tail???

[ImplodedHamster]

Pillion seat came in the post today. Very happy with it, thanks :)
good good, enjoy :)
Do you have the complete rear tail???
nope, the rear subframe was bent and plastics cracked, only have what is listed in the original post

[spezer]

good good, enjoy :)

nope, the rear subframe was bent and plastics cracked, only have what is listed in the original post

OK - don't mind if they need a bit of work as I plan to modify then anyway...

Let me know either way..

[ImplodedHamster]

OK - don't mind if they need a bit of work as I plan to modify then anyway...

Let me know either way..
the plastics got chucked, you're welcome to the rear subframe for the price of postage if you want? but it is bent... i'll take some photos later if you want? (also, a K3 rear sub frame will only fit a K3 bike)

[ImplodedHamster]

Hugger and mirror extenders now sold

[ImplodedHamster]

nearly fell of the page! :O
open to offers

[Spoonie]

Hey, my first post here and it's after a lowside :(

Anyways whilst clinging on to the bike till it hit the curb I did a little bit of damage

So can I call dibs, shotgun, or whatever on the:
LHS pillon footpeg (as long as it folds up and down)
A LHS (rear if it makes a difference) Indicator if it has the black backing part to go with it

As a general if anyone knows where to find a left footpeg and gear change assembly, and a new sidestand a pm or reply would be massively appreicated

[ImplodedHamster]

Hey, my first post here and it's after a lowside :(

Anyways whilst clinging on to the bike till it hit the curb I did a little bit of damage

So can I call dibs, shotgun, or whatever on the:
LHS pillon footpeg (as long as it folds up and down)
A LHS (rear if it makes a difference) Indicator if it has the black backing part to go with it

As a general if anyone knows where to find a left footpeg and gear change assembly, and a new sidestand a pm or reply would be massively appreicated
PM heading your way

[ImplodedHamster]

LHS pillon footpeg (as long as it folds up and down)
money received, i'll send it out tomorrow :)

Thanks

[Ben Whitcher]

Rob- Still havent answered me on Facebook regarding tail tidy pal. Let me know as i would like to receive it as soon as possible. :)

[Kenzie]

Do you have the toolbox cover and retaining pin?

[ImplodedHamster]

Rob- Still havent answered me on Facebook regarding tail tidy pal. Let me know as i would like to receive it as soon as possible. :)
you never sent a address to send to :-P PM me one and i'll send it out :)
(btw, i have no bolts for it... not sure if you can use the current ones or not?
Do you have the toolbox cover and retaining pin?
there was a toolbox cover and retaining pin?! sorry, no...

[Ben Whitcher]

Rob :~) No bolts hmm thats going to be interesting. Any ideas on postage costs and ill PM you over Facebook my address pal.

[muzikill]

LHS Heel plate? - you didnt sell it with the foot peg/gear change lever did you?

I'd be interested to buy the plate only.

[ImplodedHamster]

LHS Heel plate? - you didnt sell it with the foot peg/gear change lever did you?

I'd be interested to buy the plate only.
hmm.. the peg and stuff was knacked, but i might have the heel plate some where... i'll check later for you

[OZ-SV]

hiya peoples
Full power ECU - used, good condition £40 posted
Thanks
Rob

Is this ECU two pin or one? If two, please PM me a shipping price to Australia.

[Ben Whitcher]

Its one pin. Two pins start at 2007. His bike was 2003.

[ImplodedHamster]

Is this ECU two pin or one? If two, please PM me a shipping price to Australia.

Its one pin. Two pins start at 2007. His bike was 2003.
yup, ben is right :) thanks

[ImplodedHamster]

hmm.. the peg and stuff was knacked, but i might have the heel plate some where... i'll check later for you
sorry, i binned it due damage...

[OZ-SV]

Thanks Ben for that info, will make it easier to find one.

Good luck with the sales ImplodedHamster.

[ImplodedHamster]

engine now gone

bumpty bump

[DarrenSV650S]

engine now gone

bumpty bump

You mean it's posted already!? :smt026 :smt003

[ImplodedHamster]

You mean it's posted already!? :smt026 :smt003
:p as in no longer available, the tool to remove it hasn't even arrived yet :(

[ImplodedHamster]

offers anyone? :(

[charlie34]

Do you still have the toolkit? Would you take £10 posted? cheers.

[ImplodedHamster]

Do you still have the toolkit? Would you take £10 posted? cheers.
PM'ed

[cbay]

Tank?

[ImplodedHamster]

Tank?
Tank - 1 dent, and some scratches as shown in pictures, no leaks £70 pick up

All pictures are here (http://s1236.photobucket.com/albums/ff445/ImplodedHamster/Bike%20bits/), if you want more pictures of something PM me.

i could post, but at your cost. it includes the fuel pump and silver insulating thingy

:)

[ImplodedHamster]

toolkit now gone

anyone know why it's taking so long to shift stuff? or am i just being inpatient...

[scully19]

Indicator lights left? Looking for front left, but front right should do the same job.

[ImplodedHamster]

got plastic coloured bit and bulb, but no actually indicator... sorry

[quik_d]

Could really do with the tank prop if you still have it?

[ImplodedHamster]

hmmm... i had 2... but not sure of there where abouts.... i'll take a look for you

[ImplodedHamster]

hmmm... i had 2... but not sure of there where abouts.... i'll take a look for you
i'll let you know tomorrow, sorry for delay bike is at parents house...

bumpty bump

[ImplodedHamster]

found 1 :) sending you a PM now

[ImplodedHamster]

tank prop now gone :)
why is stuff not selling? priced to high? :S

[cbay]

Any of the following available still?

- Rear Brake Lever
- Front Subframe which holds the Headlight and Clock Bracket
- Any Fairings

[ImplodedHamster]

Any of the following available still?

- Rear Brake Lever little bent, but should bend back fine, see pictures
- Front Subframe which holds the Headlight and Clock Bracket nope, totally mangled
- Any Fairings only the little bit that goes behind the pillion seat between the 2 rear fairing

.

[yorkie_chris]

Got forks?

[ImplodedHamster]

heh... not really :-P i have them, but very broken and bent :(
http://s1236.photobucket.com/albums/ff445/ImplodedHamster/Porlock%202011/?action=view&current=IMG_0045.jpg

[yorkie_chris]

Still interested :) How much to post them?

[ImplodedHamster]

0.o really? why? i can find out if you really want...
they look like this, but off the bike: http://s1236.photobucket.com/albums/ff445/ImplodedHamster/Porlock%202011/?action=view&current=IMG_0045.jpg

[yorkie_chris]

Well normally I can salvage bits out of them even when bent and snapped... yours however I think are exception!

I'd still take them but probably not worth the cost of post. Don't trouble yourself unless you want them out of the way as I could still melt the sliders down to make something I suppose :P

[orangebud]

You wouldnt have the spring that holds the footrest down would you?

[ImplodedHamster]

Well normally I can salvage bits out of them even when bent and snapped... yours however I think are exception!

I'd still take them but probably not worth the cost of post. Don't trouble yourself unless you want them out of the way as I could still melt the sliders down to make something I suppose :P
would probably cost around £10 or so to post, and they are completely knacked, your call....
You wouldnt have the spring that holds the footrest down would you?
yes, but don't really want to split the rearset up....

EDIT: actually, i could check the other one (assuming i haven't chucked it yet)

[ImplodedHamster]

bump (again -.- )

[Webber]

I know not the place to ask, but just looked at the fork pictures...What the hell did you crash into? Some major damage up front!

[ImplodedHamster]

I know not the place to ask, but just looked at the fork pictures...What the hell did you crash into? Some major damage up front!
a car, then a pillar, and then a bank....
details here: http://forums.sv650.org/showthread.php?t=170266

[ImplodedHamster]

grab rail gone, bump :-P

[quik_d]

Hi again,

Are the damper rods in the botton of the forks in functional condition? Might be interested then i can keep mine as standard should i ever want to take the emulators out.

Cheers
D

[ImplodedHamster]

Hi again,

Are the damper rods in the botton of the forks in functional condition? Might be interested then i can keep mine as standard should i ever want to take the emulators out.

Cheers
D
they're completely dead sorry....

[SVMAT]

Hi, have you still got the DID chain? if so i dont suppose you'l take 20 squid for it would you? Cheers

Matt

[ImplodedHamster]

nope sorry, my minimum would be £50 posted. tis their best chain, will do another 15k miles and all it needs is a split link so i think it's worth £50

[ImplodedHamster]

bump....

[Mike_84_650S'99]

Hi do you still have that oil cooler pipe listed? Or is it gone along with the engine?

[ImplodedHamster]

still here :) PM'ed

[ImplodedHamster]

oil cooler pipe gone :D

[ImplodedHamster]

prices lowered...

[shao]

I'll take the number plate light if that's still going - also looking for one of the bolts that hold the seat on, and one of the bolts for the panel that goes over the seat bolt, if you've got one of either?

[ImplodedHamster]

I'll take the number plate light if that's still going - also looking for one of the bolts that hold the seat on, and one of the bolts for the panel that goes over the seat bolt, if you've got one of either?
number plate light i can do, the bolts were all shoved in one bowl so don't know what's what.... i'll pm you now

[ImplodedHamster]

number plate light now gone (yes this is just an excuse to bump :-P )

[Mike_84_650S'99]

Hey Rob.

Its me again. The Reg/Rec. Is there any chance of checking if it works? Mine got fried due to some tampering by the previous owner and coroded insulation. Funny enough it had Honda 350 SuperDream written on the back :/. Let me know please.

Cheers.
Mike

[ImplodedHamster]

i can't check it, but it was working fine previously and there is no reason why it won't now.
if it doesn't work, you can sent it back and i'll refund you?
PM me if it's of any use

[ImplodedHamster]

few more bits gone, bumpty bump

[ImplodedHamster]

bump

[Minitwin_29]

Tank, brake lever and temp sensor all received with thanks.

[ImplodedHamster]

bump

[ImplodedHamster]

bump again :( will update with a less messy thread soon. all the non sell able bits have gone to the scrap now

[ImplodedHamster]

bump

[oxgubc]

Didn't see it in the list but do you have the cover for the tool kit for sale still?

[ImplodedHamster]

cover for tool kit? like the pouch the tools sit in? if so, then nope, it went with the tools

[oxgubc]

Sorry, should have made it a bit clearer - it's the plastic cover to the box in which the tools are kept on the bike not the actual bag in which they are kept.

It's got a wee plastic nub to pull it off and reveals the little cubbie hole in which the tools are kept.

[ImplodedHamster]

i'm still not sure what you're after. the tool kit on a pointy is held down buy a rubber band onto the under tray, then only thing that then goes on top of that is the pillion seat or seat cowl... have you got a photo of what you're after?

[ophic]

K4 and onwards tool tray is in a different place. Yours is a K3 so won't have the right parts.

[ImplodedHamster]

K4 and onwards tool tray is in a different place. Yours is a K3 so won't have the right parts.
ahh, that explains it then, thanks

[ImplodedHamster]

bump...

[Stingo]

Hi - have you got the LHS front peg?

[ImplodedHamster]

nope sorry :(

[ImplodedHamster]

bump :)

[ImplodedHamster]

bump, i'll put up an updated thread with just what i have left soon :)

[trail guru]

Hi ImplodedHamster (http://forums.sv650.org/member.php?u=14738) I'm up for the rear caliper. Please PM me. Cheers.