PDA

View Full Version : Racetech Emulators for pointy

yorkie_chris
11-09-11, 11:59 AM
Used but perfectly operational.

£50 collected

or
+£4 to post
+£50 + parts to fit to loose forks
+£60 + parts to fit to forks on bike

Cheers

Chris
oOTomOo
11-09-11, 08:14 PM
Any chance these would fit in a curvy? A quick google seems to suggest the front forks are the same?

Tom
yorkie_chris
11-09-11, 08:31 PM
No the step on the bottom is the wrong diameter for the curvy. I could machine them but I'd rather not.

I can sort you out with some emulator valves for curvy for similar price.
T0mmyGun92
11-09-11, 08:34 PM
does it come with the springs?
yorkie_chris
11-09-11, 08:35 PM
Fork springs, no, they're about £100. (I wouldn't expect those for £50!)
T0mmyGun92
11-09-11, 08:36 PM
i was wondering, be the bargain of the century otherwise :P
yorkie_chris
11-09-11, 08:38 PM
I've been looking for a spring supplier but nobody will give me much discount, I don't buy in enough volume to interest them unfortunately.



So yeah, emulators for sale :)
T0mmyGun92
11-09-11, 08:39 PM
you able to get the springs in then at £100? and would it be more to get them posted if with the emulators if you can?
yorkie_chris
11-09-11, 08:42 PM
I will find out for you tomorrow.
T0mmyGun92
11-09-11, 08:42 PM
much appreciated
Ruffy
11-09-11, 10:16 PM
YC, any chance you can let me know if you don't sell to TommyGun?
yorkie_chris
12-09-11, 11:07 AM
£150 for the emulators and a set of springs posted.

Ruffy if he does have them I could sort you a set of the cheaper emulator valves out with spacers to make them sit in the pointy forks properly for similar price to these.
yorkie_chris
15-09-11, 02:07 PM
Still available
quik_d
15-09-11, 07:43 PM
What needs to be done to fit these? I've stripped forks before but never done more than fitted new seals and replaced springs & oil.

03 pointy btw
yorkie_chris
16-09-11, 11:30 AM
You need to take damper rod out, weld up rebound hole, drill comp holes out a bit then reassemble. Emu itself just drops straight in under spring.

I can supply damper rods modified to suit on exchange basis for anyone who can't weld and drill their own, or do all work on fork.
Lateksi
16-09-11, 04:49 PM
pm sent
quik_d
16-09-11, 08:55 PM
Yc how much would some modded damper rods be with the emulators?
yorkie_chris
16-09-11, 09:42 PM
Lateksi is kinda in first for these but I can sort you out some equivalent valves for similar price (helpfully I'd need the rods to make a bushing for...)

£70 for valves and rods (damper rods on exchange basis or send me yours to do, or if you want second set of rods* add £20)


*There is not much need, you could take emulator out and put stock oil and springs back in and the damping performance isn't that much worse than stock anyway. i.e rubbish.