rear caliper joining bolts ruined

[Gremlin]

This is so frustrating, after getting all the fairings off and front brakes to be cleaned and serviced, without incident.
WHY do the last 2 bolts have to be such gits to remove?! :smt013
Anyway i've had a look on the forum but could someone please confirm that these bolts are safe to use so i can put my rear brake back together. They seem right but the top doesn't seem as thick as the originals.
http://www.ebay.co.uk/itm/STAINLESS-M10-x-40-1-25-FINE-PITCH-ALLEN-BOLTS-2-/360395494925?pt=UK_Motorcycle_Parts&hash=item53e93ed60d#ht_500wt_1180

Thanks guys

[andrewsmith]

Yep they'll work.

I'd swap them for standard heads as it'll be easier to strip the next time. Just get them from the firm selling the ones you've posted

HTH

[Gremlin]

The smallest head they do is 14mm, that seems a bit big. I'm going to see if I can get it with a smaller head. Thanks for reply.

[Sid Squid]

The same caliper was originally with 14mm headed bolts. The GSX and earlier GSXR models has such fittings.

[andrewsmith]

The smallest head they do is 14mm, that seems a bit big. I'm going to see if I can get it with a smaller head. Thanks for reply.

The 14mm heads fine, it doesnt cause any issues.

[Gremlin]

Thanks, i'm ordering them today. Hopefully have the rear caliper back on soon. Then it's on to fitting new lines and clip-ons.