Sv650s curvy 2001 top central yoke nut For Fone holder

[Joe Marcon]

http://img18.imageshack.us/img18/9117/img0414xdy.jpgThe central yoke nut on my bike has a hole in it . Not sure how big but i want to be able to fit a fone holder what slides down hole . I bought the wrong part before thinking i had handle bars :$ yes silly . so i need a bigger top yoke nit with a bigger whole to either fit http://www.amazon.co.uk/Ultimate-Addons-15mm-17mm-Motorcycle-Adaptor/dp/B005FQFFT0/ref=sr_1_5?ie=UTF8&qid=1326124235&sr=8-5
Any of them sizes . Anywhere i can change top nut to any size like 17mm or wat ever i need to do it . Fank you

[maviczap]

Get one of these and buy a ram mount for your phone.

I can't think of a bigger top yoke nut and drilling your original one might not be a great idea

http://www.telferizer.com/

[Joe Marcon]

I already got an iphone 4s case plus charger . Just need the yoke hole size or a size that will fit

[Joe Marcon]

http://imageshack.us/photo/my-images/3/img0383bz.jpg/
what size is the hole ? or do i need a new nut ?

[maviczap]

its about 8mm

[Joe Marcon]

its about 8mm
so i'll need a bigger nut to about 14-18mm to fit 1 of these on amazon . anywhere u know sell the nut ?

[maviczap]

the hole is about 8mm in diameter, but there is no room to fit a 14 - 18mm nut under the yoke nut.

[Joe Marcon]

the hole is about 8mm in diameter, but there is no room to fit a 14 - 18mm nut under the yoke nut.
i mean like same nut but bigger hole.
this is what i want in the hole http://www.amazon.co.uk/Ultimate-Addons-13-3mm-14-7mm-Motorcycle-Adaptor/dp/B005FQGS14/ref=sr_1_39?ie=UTF8&qid=1326128952&sr=8-39

[maviczap]

Can't think of one, you'll need to drill it.

But looking at that mount, the black bit looks like it separates from the silver bit, which should fit into the steering stem once you've separated them.

Then put the yoke nut back on and screw the black ram mount onto the silver adaptor?

You'd have to see if a GSXR yoke nut was the same thread, as that its what is in the picture in your original thread, but that is unlikely to work as the steering stems are different lengths & diameters.

[Joe Marcon]

not sure what to do :S . just need a nut with a hole in to fit any of these sizes


13.3mm - 14.7mm / 0.52" - 0.58"
15mm - 17.2mm / 0.59" - 0.68"
17.5mm - 20.5mm / 0.68" - 0.81"

[maviczap]

Having just looked at the top yoke nut and steering stem on my Sv, this is what you could do.

The silver part of your mount is supposed to wedge into the steering stem tube when you tighten the allen bolt.

You can't do this because the Sv nut isn't the same as the GSXR type yoke nut.

But if you separate the black RAM mount from the silver wedge part, and then pass the allen bolt from the ram mount through the hole of the SV yoke nut and use the bolt or similar thread sized nut and bolt the ram mount to the SV yoke nut.

Then bolt the Sv yoke nut back onto the steering stem.

Don't forget to put the thing that stops the phone bracket moving on first before bolting the ram mount to the Sv yoke nut

BrNsB7cYPFM

[Joe Marcon]

13.3mm - 14.7mm / 0.52" - 0.58"
15mm - 17.2mm / 0.59" - 0.68"
17.5mm - 20.5mm / 0.68" - 0.81"
Which size of thos shud i get then mate ??

[Joe Marcon]

NoT sure if that silver bit come apart from black thing ?

[maviczap]

Doesn't matter as you're using the centre bolt not the silver wedge bit. I guess the centre bolt is going to be the same size.

Just go for the 13.3 - 14.7mm size

[maviczap]

NoT sure if that silver bit come apart from black thing ?

Looks like it does, otherwise how did they anodise each separate colour.

If it doesn't you're stuffed IMHO.

[Joe Marcon]

Haha be right oni £22 . We'll find owt . Ordered now :)

[Joe Marcon]

Looks like it does, otherwise how did they anodise each separate colour.

If it doesn't you're stuffed IMHO.
yay thanks it works :) can now use my iphone while riding(without gloves) will get pick on soon

[maviczap]

Super job