Pointy parts

[ImplodedHamster]

heya,
i have what's left from breaking my bike, 2003 sk3 in Y2C. This is all i have left now, i have moved everything to this thread as the last one was getting messy
i'm open to offers on everything (some prices have been a guess), and prices are included P&P unless stated otherwise, collection is fine from the BN14 area

Lock set, complete with all 3 locks and both keys, the main lock wiring has been cut and doesn't have the connector - £40
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0051.jpg

pillion seat lock mechanism - £10
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0050.jpg

Chain adjusters (without plates to indicate position) - £10
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0049.jpg

Throttle bodies, all the leads/pipes attached in the photo are included - £40 (the restriction kit shown is not included)
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0048.jpg

2x Clear indicator bulbs and orange covers - £5 each
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0047.jpg

Horn, works fine, bit rusted - £8
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0045.jpg

Side stand switch - £8
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0044.jpg

The bit of rubber that sits on the rear cylinder head - £5
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0043.jpg

RHS switch gear, works fine - £10 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0042.jpg

RHS clip on - £10 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0041.jpg

Rear light cluster, works fine, some chips but nothing that goes all the way through - £15
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0040.jpg

Rear calliper mount - £5 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0039.jpg

Reg/rec from a K6 (the one on my bike was clearly replaced at some point) - £30
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0038.jpg

Rear calliper and m/c (probably due a service) - £50 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0037.jpg

Front m/c - £10 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0036.jpg

Rear brake light switch - £5
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0035.jpg

Bar ends, scuffed but functional - £5
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0034.jpg

RHS pillion foot rest - £15
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0033.jpg

RHS rearset, brake pedal is bent and heel plate bit worn, but fine other than that - £15 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0032.jpg

Rider seat (K3 only) - £30
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0031.jpg

ECU (fits K3 to K6) - £30 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0030.jpg

The plastic plate that sits under the lower yoke - £5
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0029.jpg

Throttle grip and cables - £15 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0028.jpg

Tail piece, surface scratches - £5
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0027.jpg

RHS fairing infill panel - £5
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0026.jpg

Wiring loom, intact apart from the connector that goes to the lock has been cut - £30http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0025.jpg


HT leads (i think that's what they're called...) - £15 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0024.jpg

Rear shock, needs service and has a bit of surface rust - £20 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0023.jpg

Upper yoke, bit scuffed but functional - £20 SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0022.jpg

Box of SV650 K3 screws and some of an engine mounting kit - £15 (not splitting, or finding individual bolts) (the the 3 long bolts pictured aren't included) SOLD
http://i1236.photobucket.com/albums/ff445/ImplodedHamster/SV650%20Parts%20for%20sale/IMG_0020.jpg

Thanks
Robert

[laxman1992]

do you have the rear rhs fixing bolts for the heel plate?
james

[Shaky]

Do you have a rear seat for sale?

[ImplodedHamster]

do you have the rear rhs fixing bolts for the heel plate?
james
hmm.... not sure if they're with the rear set or in the big pile, i'll check for you tomorrow

Do you have a rear seat for sale?
This is all i have left now

[Badeye]

Do you have the nose cone for sale? if so what condition is it in?

[ImplodedHamster]

Do you have the nose cone for sale? if so what condition is it in?
nope, sorry. this is all i have left

[ImplodedHamster]

bump, i have forgotten about the screws but have written a BIG note to remind me tomorrow :)

[ImplodedHamster]

do you have the rear rhs fixing bolts for the heel plate?
james
they're not with the rear set, so will be some where in the box of screws... sorry

[ImplodedHamster]

no takers for anything... too expensive? obscure parts?

[ImplodedHamster]

prices dropped, no one?

[ImplodedHamster]

bump

[harvy]

Is the RHS rearset still available? Also for the chain adjuster, do you still have the plates on the outside?

Also any of the plastic pop rivets that hold the plastic shell at the back together?

[ImplodedHamster]

Is the RHS rearset still available? Also for the chain adjuster, do you still have the plates on the outside?

Also any of the plastic pop rivets that hold the plastic shell at the back together?
rear set is still here, but no plates for the adjuster or pop rivits.
drop me a PM if you want the rearset

[ImplodedHamster]

few bits gone, bump :)

[ImplodedHamster]

bump, everyone's stuff arrived?

[ImplodedHamster]

bump again....

[smarty0121]

Hi do you still have the rider seat for sale? If so how much will postage cost? Many thanks

[bigbill]

hi do you have the tank ?

[ImplodedHamster]

Hi do you still have the rider seat for sale? If so how much will postage cost? Many thanks
the prices are including postage, so £35 is posted UK mainland
hi do you have the tank ?
nope that went a while back, sorry

[ImplodedHamster]

bump

[ImplodedHamster]

bumpty bump

[ImplodedHamster]

bump
open to offers on everything....

[dwhitt]

PM'd

[ImplodedHamster]

bump again :( prices to high? or the parts to random?

[ImplodedHamster]

bump...

[tj2]

bump
open to offers on everything....

How about a tenner for the throttle bodies and washers???:smt083:smt083:D

terry

[ImplodedHamster]

it'll cost near that to post, they're not small or light :/ looking at your thread in the wanted section is it just the restriction kit you want? cause i can send you just restriction kit for £10?

[ImplodedHamster]

bumpty again

[ImplodedHamster]

haven't bumped this in a while :-P

[ImplodedHamster]

bump again......

[tm_94]

Hi mate ill take the rear brake pedal off you.

At a good price that is? :)

cheers
Tom

[tm_94]

just seen its sold ha

[ImplodedHamster]

bump, anyone know why this stuff isn't selling?

[ImplodedHamster]

bump

[DRN]

Hello mate. Does the Rhs clip on bar fit on a 41mm fork? If so is it still available? Thanks

[ImplodedHamster]

Hello mate. Does the Rhs clip on bar fit on a 41mm fork? If so is it still available? Thanks
still available, it defo fits the forks on a pointy, not sure what diameter they are and i don't have any to check against. put a post in the SV talk section asking, someone will know
robert

[DRN]

Wicked. I would like to buy the RH Switch Gear (£10), RH Clip on bar (£10), Front Master cylinder (£10) and the throttle grip + cables (£15) if they are all available, which in total comes to £45, would you be able to include postage in that? How would you like payment? PayPal would be the preferred method.

Cheers

[ImplodedHamster]

Wicked. I would like to buy the RH Switch Gear (£10), RH Clip on bar (£10), Front Master cylinder (£10) and the throttle grip + cables (£15) if they are all available, which in total comes to £45, would you be able to include postage in that? How would you like payment? PayPal would be the preferred method.

Cheers
you have a PM :D

[ImplodedHamster]

few more bits gone, bump to the top again

[svshaz]

PM sent.

[Rowan207]

Hi, interested in the Rear light cluster, does it have all wires for connection readily accessible?

[ImplodedHamster]

yup wires and connector is all there, i'll drop you a PM now :)

[ImplodedHamster]

bump

[ImplodedHamster]

bumpty bump

[ian505050]

bump

[ImplodedHamster]

bumpty bumpty

[Sparky160]

Does the Lock set all function OK? If so to fit does the upper yoke have to be removed and what is the connector that is missing? Thannks

[ImplodedHamster]

all the locks function fine, i can't remember if the top yoke has to be remove.... a post in the sv section should answer that question, and the missing connector is the one that links the main switch into the wiring loom, you could either soldering a new connector on the end, or just cut the other wires and then solder them together

[ImplodedHamster]

bump again :-P

[ImplodedHamster]

bumpty bump

[ImplodedHamster]

buuuuuuuuuuuuuuuuuuuuump!

[ImplodedHamster]

still got these.... offers?

[ImplodedHamster]

bump again :)

[ImplodedHamster]

boing boing....

[madnlooney]

Hi mate, ill take the horn.
can you pm me paypal details. Also do you have the pillion grab rail?

[ImplodedHamster]

replied, no grab rail though sorry

[ImplodedHamster]

rear shock now gone :)

bumpty bump

[Graham SV650]

Do you still have the 33bhp restrictor kit, if so what type is it?

[ImplodedHamster]

Do you still have the 33bhp restrictor kit, if so what type is it?
it was a throttle stop type, but it's gone now, sorry

[Graham SV650]

No worries, thanks for getting back to me so soon.

[ImplodedHamster]

ecu gone, offers on what's left anyone?

[StuL]

Is the tail piece still avaliable? If so how bad are the surface scratchies?

[ImplodedHamster]

Is the tail piece still avaliable? If so how bad are the surface scratchies?
they're not bad, i'll try to take some better photos for you later today

[ImplodedHamster]

Hey guys! Guess what!

...bump...

[ImplodedHamster]

bump again...

[ImplodedHamster]

bump :)

[DanSp]

Whats in the pot of screws.... it is a case of chuck all the bolts in a pot when youve removed them? Any fairing bolts in there?

If so... ill give you a tenner collected? :)

[ImplodedHamster]

it is literally a pot of screws from when i took the bike apart, there should be some fairing bolts in there somewhere :)

£10 collected is fine, all the bits are in worthing (south coast, near brighton). PM me if you're interested :)

[ImplodedHamster]

bumpty bump....

[ImplodedHamster]

this hasn't been bumped in a while :P
anyone want anything? offers?

[CodeJACK]

this hasn't been bumped in a while :P
anyone want anything? offers?

Whats the best price you could do on the loom including shipping to Dublin, Ireland?

[cade2000]

Hi I am after Bar ends but i need the whole internal assembly, does yours have the screw and rubber expansion grommets? Cheers

[ImplodedHamster]

Whats the best price you could do on the loom including shipping to Dublin, Ireland?
Shipping looks to be around £15, so say £35 posted?

Hi I am after Bar ends but i need the whole internal assembly, does yours have the screw and rubber expansion grommets? Cheers
I only have the actual bar ends, non of the internal bits. Sorry

[cade2000]

I only have the actual bar ends, non of the internal bits. Sorry

Thanks